Film Capacitors Metallized Polypropylene Film Capacitors (MKP) Series/Type: B32674 ... B32678 Date: June 2013 © EPCOS AG 2013. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. Metallized polypropylene film capacitors (MKP) B32674 ... B32678 MKP DC link high power series Typical applications For high ripple current modules in: Frequency converters Industrial and high-end power supplies Solar inverters Dimensional drawings 2-pin version Climatic Max. operating temperature: 105 °C (case) Climatic category (IEC 60068-1): 40/100/56 Construction Dielectric: metallized polypropylene (MKP) Plastic case (UL 94 V-0) Epoxy resin sealing (UL 94 V-0) 4-pin version Features Excellent self-healing properties Over-voltage capability Optimized electrical contact High frequency ripple current High reliability Long useful life RoHS-compatible Halogen-free capacitors available on request Terminals Parallel wire leads, lead-free tinned 2-pin and 4-pin versions Standard lead lengths: 6 1 mm Special lead lengths are available on request Dimensions in mm Marking Manufacturer's logo and lot number, date code, rated capacitance (coded), capacitance tolerance (code letter), rated DC voltage Version Lead spacing ±0.4 Lead diameter d1 Type 2-pin 27.5 0.8 B32674D 2-pin 37.5 1.0 B32676T 4-pin 37.5 1.2 B32676G 4-pin 52.5 1.2 B32678G Delivery mode Bulk (untaped, lead length 6 1 mm) Please read Cautions and warnings and Important notes at the end of this document. Page 2 of 22 B32674 ... B32678 MKP DC link high power series Overview of available types Lead spacing 27.5 mm Type B32674 Page 6 VR (V DC) 300 450 630 CR (µF) 0.47 0.68 1.0 1.5 2.2 3.0 3.3 4.0 4.7 5.0 5.6 6.0 6.8 7.5 8.0 8.2 10 12 Please read Cautions and warnings and Important notes at the end of this document. Page 3 of 22 750 875 B32674 ... B32678 MKP DC link high power series Lead spacing 37.5 mm Type B32676 Page 8 VR (V DC) 300 450 630 CR (µF) 1.5 2.0 2.7 3.3 3.5 4.0 4.7 5.6 6.2 6.8 7.5 8.2 9.0 10 12 14 15 20 22 25 30 35 Please read Cautions and warnings and Important notes at the end of this document. Page 4 of 22 750 875 B32674 ... B32678 MKP DC link high power series Lead spacing 52.5 mm Type B32678 Page 10 VR (V DC) 300 450 630 CR (µF) 15 20 25 30 35 40 47 60 Please read Cautions and warnings and Important notes at the end of this document. Page 5 of 22 750 875 B32674 MKP DC link high power series Ordering codes and packing units (lead spacing 27.5 mm) CR Max. dimensions w×h×l P1 µF mm mm Ordering code (composition see below) VR,85 °C = 300 V DC, Vop,70 °C = 450 V DC 2.2 11.0 × 19.0 × 31.5 B32674D3225+000 3.3 12.5 × 21.5 × 31.5 B32674D3335+000 4.7 14.0 × 24.5 × 31.5 B32674D3475+000 5.0 15.0 × 24.5 × 31.5 B32674D3505+000 5.6 15.0 × 24.5 × 31.5 B32674D3565+000 6.8 18.0 × 27.5 × 31.5 B32674D3685+000 8.0 16.0 × 32.0 × 31.5 B32674D3805+000 8.2 18.0 × 33.0 × 31.5 B32674D3825+000 10 21.0 × 31.0 × 31.5 B32674D3106+000 12 22.0 × 36.5 × 31.5 B32674D3126+000 VR,85 °C = 450 V DC, Vop,70 °C = 630 V DC 1.5 11.0 × 19.0 × 31.5 B32674D4155+000 2.2 12.5 × 21.5 × 31.5 B32674D4225+000 3.3 15.0 × 24.5 × 31.5 B32674D4335+000 4.7 18.0 × 27.5 × 31.5 B32674D4475+000 5.0 16.0 × 32.0 × 31.5 B32674D4505+000 5.6 18.0 × 33.0 × 31.5 B32674D4565+000 6.0 21.0 × 31.0 × 31.5 B32674D4605+000 6.8 22.0 × 36.5 × 31.5 B32674D4685+000 7.5 22.0 × 36.5 × 31.5 B32674D4755+000 VR,85 °C = 630 V DC, Vop,70 °C = 800 V DC 1.0 11.0 × 19.0 × 31.5 B32674D6105+000 1.5 12.5 × 21.5 × 31.5 B32674D6155+000 2.2 15.0 × 24.5 × 31.5 B32674D6225+000 3.3 16.0 × 32.0 × 31.5 B32674D6335+000 4.7 22.0 × 36.5 × 31.5 B32674D6475+000 5.0 22.0 × 36.5 × 31.5 B32674D6505+000 IRMS,max 70 °C 10 kHz A IRMS,max 70 °C 20 kHz A 7.5 9.0 11.0 11.0 11.5 12.5 13.5 14.0 15.0 16.0 6.5 8.0 9.5 10.0 10.5 11.5 12.5 13.0 14.0 15.0 7.5 5.3 4.1 4.0 3.9 3.7 3.4 3.2 2.9 2.5 1280 1120 1040 960 960 800 880 800 720 640 6.5 8.0 9.5 11.5 12.0 12.5 13.0 14.0 15.0 6.0 7.0 8.5 10.5 11.0 11.0 11.5 12.5 13.0 9.2 7.8 5.2 5.0 5.0 4.4 4.3 4.0 3.9 1280 1120 960 800 880 800 720 640 640 5.0 6.5 7.0 7.0 9.5 10.5 4.5 6.0 6.0 6.0 9.5 9.5 14.4 14.3 8.0 6.5 5.8 5.8 1280 1120 960 880 640 640 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 6 of 22 ESRtyp 70 °C 10 kHz mΩ Straight terminals, Untaped pcs./MOQ B32674 MKP DC link high power series Ordering codes and packing units (lead spacing 27.5 mm) CR Max. dimensions w×h×l P1 µF mm mm Ordering code (composition see below) VR,85 °C = 750 V DC, Vop,70 °C = 900 V DC 0.68 11.0 × 19.0 × 31.5 B32674D1684+000 1.0 12.5 × 21.5 × 31.5 B32674D1105+000 1.5 14.0 × 24.5 × 31.5 B32674D1155+000 2.2 18.0 × 27.5 × 31.5 B32674D1225+000 3.3 21.0 × 31.0 × 31.5 B32674D1335+000 4.0 22.0 × 36.5 × 31.5 B32674D1405+000 VR,85 °C = 875 V DC, Vop,70 °C = 1050 V DC 0.47 11.0 × 19.0 × 31.5 B32674D8474+000 0.68 11.0 × 21.0 × 31.5 B32674D8684+000 1.0 13.5 × 23.0 × 31.5 B32674D8105+000 1.5 18.0 × 27.5 × 31.5 B32674D8155+000 2.2 18.0 × 33.0 × 31.5 B32674D8225+000 3.0 22.0 × 36.5 × 31.5 B32674D8305+000 IRMS,max 70 °C 10 kHz A IRMS,max 70 °C 20 kHz A ESRtyp 70 °C 10 kHz mΩ Straight terminals, Untaped pcs./MOQ 5.0 6.0 7.5 9.0 10.0 11.0 4.5 5.5 6.0 7.5 9.0 10.0 23.3 12.4 9.5 6.6 6.0 5.6 1280 1120 1040 800 720 640 5.0 6.0 7.5 7.0 10.0 11.0 4.5 5.5 6.0 6.5 9.0 10.0 22.9 18.6 13.6 8.5 5.1 6.8 1280 1280 1040 800 800 640 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 7 of 22 B32676 MKP DC link high power series Ordering codes and packing units (lead spacing 37.5 mm) CR Max. dimensions w×h×l P1 µF mm mm Ordering code (composition see below) VR,85 °C = 300 V DC, Vop,70 °C = 450 V DC 6.2 24.0 × 15.0 × 41.5 B32676T3625+000 9 24.0 × 19.0 × 41.5 B32676T3905K000 15 20.0 × 39.5 × 42.0 10.2 B32676G3156+000 20 28.0 × 37.0 × 42.0 10.2 B32676G3206+000 22 28.0 × 42.5 × 42.0 10.2 B32676G3226+000 25 28.0 × 42.5 × 42.0 10.2 B32676G3256+000 30 30.0 × 45.0 × 42.0 20.3 B32676G3306+000 35 33.0 × 48.0 × 42.0 20.3 B32676G3356+000 VR,85 °C = 450 V DC, Vop,70 °C = 630 V DC 4.0 24.0 × 15.0 × 41.5 B32676T4405+000 4.7 24.0 × 9.0 × 41.5 B32676T4475+000 8.2 20.0 × 39.5 × 42.0 10.2 B32676G4825+000 10 20.0 × 39.5 × 42.0 10.2 B32676G4106+000 15 28.0 × 42.5 × 42.0 10.2 B32676G4156+000 20 30.0 × 45.0 × 42.0 20.3 B32676G4206K000 25 33.0 × 48.0 × 42.0 20.3 B32676G4256K000 VR,85 °C = 630 V DC, Vop,70 °C = 800 V DC 2.7 24.0 × 15.0 × 41.5 B32676T6275+000 3.5 24.0 × 19.0 × 41.5 B32676T6355+000 6.8 20.0 × 39.5 × 42.0 10.2 B32676G6685+000 7.5 20.0 × 39.5 × 42.0 10.2 B32676G6755+000 8.2 28.0 × 37.0 × 42.0 10.2 B32676G6825+000 10 28.0 × 42.5 × 42.0 10.2 B32676G6106+000 12 28.0 × 42.5 × 42.0 10.2 B32676G6126+000 14 30.0 × 45.0 × 42.0 20.3 B32676G6146+000 15 33.0 × 48.0 × 42.0 20.3 B32676G6156+000 IRMS,max 70 °C 10 kHz A IRMS,max 70 °C 20 kHz A 9.5 11.0 15.0 15.5 16.0 16.5 17.0 18.0 9.5 10.5 14.0 14.5 15.0 15.5 16.0 17.0 6.0 4.5 3.2 2.7 2.6 2.4 2.3 1.5 1040 780 640 440 440 440 400 192 8.5 9.5 11.5 12.5 14.0 16.0 18.0 8.5 9.0 10.0 11.0 13.0 15.0 17.0 7.0 7.0 8.8 7.3 5.0 4.0 1.5 1040 780 640 640 440 400 192 8.0 9.0 10.0 10.0 10.5 11.0 11.5 12.0 15.0 8.0 9.0 9.5 9.5 10.0 10.5 11.0 11.5 14.0 8.0 7.0 7.1 6.7 6.2 5.7 5.5 3.6 2.3 1040 780 640 640 440 440 440 400 192 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 8 of 22 ESRtyp 70 °C 10 kHz mΩ Straight terminals, Untaped pcs./MOQ B32676 MKP DC link high power series Ordering codes and packing units (lead spacing 37.5 mm) CR Max. dimensions w×h×l P1 µF mm mm Ordering code (composition see below) VR,85 °C = 750 V DC, Vop,70 °C = 900 V DC 2.0 24.0 × 15.0 × 41.5 B32676T1205+000 2.7 24.0 × 19.0 × 41.5 B32676T1275+000 4.7 20.0 × 39.5 × 42.0 10.2 B32676G1475+000 5.6 20.0 × 39.5 × 42.0 10.2 B32676G1565+000 6.8 28.0 × 37.0 × 42.0 10.2 B32676G1685+000 9.0 30.0 × 45.0 × 42.0 20.3 B32676G1905+000 10 30.0 × 45.0 × 42.0 20.3 B32676G1106+000 12 33.0 × 48.0 × 42.0 20.3 B32676G1126+000 VR,85 °C = 875 V DC, Vop,70 °C = 1050 V DC 1.5 24.0 × 15.0 × 41.5 B32676T8155+000 2.0 24.0 × 19.0 × 41.5 B32676T8205+000 3.3 20.0 × 39.5 × 42.0 10.2 B32676G8335+000 4.0 20.0 × 39.5 × 42.0 10.2 B32676G8405+000 4.7 28.0 × 37.0 × 42.0 10.2 B32676G8475+000 6.8 28.0 × 42.5 × 42.0 10.2 B32676G8685+000 7.5 30.0 × 45.0 × 42.0 20.3 B32676G8755+000 10 33.0 × 48.0 × 42.0 20.3 B32676G8106K000 IRMS,max 70 °C 10 kHz A IRMS,max 70 °C 20 kHz A ESRtyp 70 °C 10 kHz mΩ Straight terminals, Untaped pcs./MOQ 7.5 8.5 11.0 11.5 12.5 14.0 15.0 19.5 7.5 8.5 10.0 10.5 11.5 13.0 14.0 19.0 10.0 8.0 7.8 7.1 6.7 6.0 5.8 2.7 1040 780 640 640 440 440 400 192 7.0 8.0 11.0 11.5 12.5 14.0 15.0 19.5 7.0 7.5 10.0 10.5 11.5 13.0 14.0 19.0 12.0 9.0 11.0 9.8 8.6 8.3 8.0 3.7 1040 780 640 640 440 440 400 192 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 9 of 22 B32678 MKP DC link high power series Ordering codes and packing units (lead spacing 52.5 mm) CR Max. dimensions w×h×l P1 µF mm mm Ordering code (composition see below) VR,85 °C = 300 V DC, Vop,70 °C = 450 V DC 40 30.0 × 45.0 × 57.5 20.3 B32678G3406+000 47 35.0 × 50.0 × 57.5 20.3 B32678G3476+000 60 35.0 × 50.0 × 57.5 20.3 B32678G3606K000 VR,85 °C = 450 V DC, Vop,70 °C = 630 V DC 30 35.0 × 50.0 × 57.5 20.3 B32678G4306+000 35 35.0 × 50.0 × 57.5 20.3 B32678G4356+000 40 35.0 × 50.0 × 57.5 20.3 B32678G4406K000 VR,85 °C = 630 V DC, Vop,70 °C = 800 V DC 20 35.0 × 50.0 × 57.5 20.3 B32678G6206+000 25 35.0 × 50.0 × 57.5 20.3 B32678G6256+000 VR,85 °C = 750 V DC, Vop,70 °C = 900 V DC 15 30.0 × 45.0 × 57.5 20.3 B32678G1156K000 20 35.0 × 50.0 × 57.5 20.3 B32678G1206K000 VR,85 °C = 875 V DC, Vop,70 °C = 1050 V DC 15 35.0 × 50.0 × 57.5 20.3 B32678G8156K000 IRMS,max 70 °C 10 kHz A IRMS,max 70 °C 20 kHz A ESRtyp 70 °C 10 kHz mΩ Straight terminals, Untaped pcs./MOQ 19.0 21.0 23.0 18.0 20.0 22.0 1.9 1.7 1.6 280 108 108 19.5 21.0 22.0 18.5 20.0 21.0 2.1 1.7 1.5 108 108 108 17.5 20.0 16.5 19.0 2.9 2.6 108 108 20.0 21.0 19.5 20.0 3.7 2.6 280 108 21.0 20.0 3.4 108 MOQ = Minimum Order Quantity, consisting of 4 packing units. Further E series and intermediate capacitance values on request. Composition of ordering code + = Capacitance tolerance code: K = ±10% J = ±5% Please read Cautions and warnings and Important notes at the end of this document. Page 10 of 22 B32674 ... B32678 MKP DC link high power series Technical data Reference standard: IEC 61071. All data given at T = 20 °C, unless otherwise specified. Max. operating temperature, Top,max +105 °C Operating temperature range (case) Upper category temperature Tmax +100 °C Lower category temperature Tmin –40 °C LS 27.5 < 3.0 ESRtyp ESR (at 10 kHz) LS 37.5 < 2.5 ESRtyp LS 52.5 < 1.5 ESRtyp Insulation Resistance Rins 30 000 s given as time constant t= CR Rins, rel. humidity ≤ 65% (minimum as-delivered values) DC test voltage between terminals (10 s) 1.5 VR DC test voltage terminal to case (10 s) 2110 V AC, 50 Hz Maximum peak current (A) Damp heat test Limit values after damp heat test Reliability: Failure rate λ Service life tSL VR (V DC) Continuous operation voltage Vop (V DC) at 70 °C Continuous operation voltage Vop (V DC) at 85 °C Maximum peak voltage VP,max (V DC) For temperatures between 85 °C and 100 °C Please read Cautions and warnings and Important notes at the end of this document. 56 days/40 °C/93% relative humidity Capacitance change | ∆C/C | ≤ 5% Dissipation factor change ∆ tan δ ≤ 1.5 · 10-3 (at 1 kHz) ≥ 50% of minimum Insulation resistance Rins as-delivered values 1 fit (≤ 1 10-9/h) at 0.5 VR, 40 °C 200 000 h at VR, 85 °C For conversion to other operating conditions and temperatures, refer to chapter "Quality, 2 Reliability". 300 450 630 750 875 450 630 800 900 1050 300 450 630 750 875 450 675 950 1125 1300 1.2%/°C of derating respect Vop at 85 °C Page 11 of 22 B32674 ... B32678 MKP DC link high power series Pulse handling capability "dV/dt" represents the maximum permissible voltage change per unit of time for non-sinusoidal voltages, expressed in V/µs. Note: The values of dV/dt and k0 provided below must not be exceeded in order to avoid damaging the capacitor. These parameters are given for isolated pulses in such a way that the heat generated by one pulse will be completely dissipated before applying the next pulse. For a train of pulses, please refer to the curves of permissible AC voltage-current versus frequency. dV/dt values Lead spacing Type VR (V DC) dV/dt in V/µs 27.5 mm 37.5 mm 52.5 mm B32674 B32676 B32678 300 450 630 750 875 300 450 630 750 875 300 450 630 750 875 40 75 100 125 150 22 54 73 85 100 15 35 50 60 70 Please read Cautions and warnings and Important notes at the end of this document. Page 12 of 22 B32674 ... B32678 MKP DC link high power series ESL values ESL 2-pin 25 nH 4-pin 17 nH Typical waveforms Restrictions: VR: Maximum operating peak voltage of either polarity but of a non-reversing waveform, for which the capacitor has been designed for continuous operation. AC ≤ 0.2 VR VP, max: Maximum permissible recurrent voltage that may appear for 2% of the period. Please read Cautions and warnings and Important notes at the end of this document. Page 13 of 22 B32674 ... B32678 MKP DC link high power series Mounting guidelines 1 Soldering 1.1 Solderability of leads The solderability of terminal leads is tested to IEC 60068-2-20, test Ta, method 1. Before a solderability test is carried out, terminals are subjected to accelerated ageing (to IEC 60068-2-2, test Ba: 4 h exposure to dry heat at 155 °C). Since the ageing temperature is far higher than the upper category temperature of the capacitors, the terminal wires should be cut off from the capacitor before the ageing procedure to prevent the solderability being impaired by the products of any capacitor decomposition that might occur. Solder bath temperature 235 ±5 °C Soldering time 2.0 ±0.5 s Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Evaluation criteria: Visual inspection Wetting of wire surface by new solder ≥90%, free-flowing solder 1.2 Resistance to soldering heat Resistance to soldering heat is tested to IEC 60068-2-20, test Tb, method 1A. Conditions: Series Solder bath temperature Soldering time MKT boxed (except 2.5 × 6.5 × 7.2 mm) 260 ±5 °C coated uncoated (lead spacing > 10 mm) MFP MKP (lead spacing > 7.5 mm) MKT boxed (case 2.5 × 6.5 × 7.2 mm) MKP (lead spacing ≤ 7.5 mm) MKT uncoated (lead spacing ≤ 10 mm) insulated (B32559) Please read Cautions and warnings and Important notes at the end of this document. Page 14 of 22 10 ±1 s 5 ±1 s <4s recommended soldering profile for MKT uncoated (lead spacing ≤ 10 mm) and insulated (B32559) B32674 ... B32678 MKP DC link high power series Immersion depth 2.0 +0/0.5 mm from capacitor body or seating plane Shield Heat-absorbing board, (1.5 ±0.5) mm thick, between capacitor body and liquid solder Evaluation criteria: Visual inspection ∆C/C0 tan δ Please read Cautions and warnings and Important notes at the end of this document. No visible damage 2% for MKT/MKP/MFP 5% for EMI suppression capacitors As specified in sectional specification Page 15 of 22 B32674 ... B32678 MKP DC link high power series 1.3 General notes on soldering Permissible heat exposure loads on film capacitors are primarily characterized by the upper category temperature Tmax. Long exposure to temperatures above this type-related temperature limit can lead to changes in the plastic dielectric and thus change irreversibly a capacitor's electrical characteristics. For short exposures (as in practical soldering processes) the heat load (and thus the possible effects on a capacitor) will also depend on other factors like: Pre-heating temperature and time Forced cooling immediately after soldering Terminal characteristics: diameter, length, thermal resistance, special configurations (e.g. crimping) Height of capacitor above solder bath Shadowing by neighboring components Additional heating due to heat dissipation by neighboring components Use of solder-resist coatings The overheating associated with some of these factors can usually be reduced by suitable countermeasures. For example, if a pre-heating step cannot be avoided, an additional or reinforced cooling process may possibly have to be included. EPCOS recommends the following conditions: Pre-heating with a maximum temperature of 110 °C Temperature inside the capacitor should not exceed the following limits: MKP/MFP 110 °C MKT 160 °C When SMD components are used together with leaded ones, the leaded film capacitors should not pass into the SMD adhesive curing oven. The leaded components should be assembled after the SMD curing step. Leaded film capacitors are not suitable for reflow soldering. Uncoated capacitors For uncoated MKT capacitors with lead spacings ≤10 mm (B32560/B32561) the following measures are recommended: pre-heating to not more than 110 °C in the preheater phase rapid cooling after soldering Please read Cautions and warnings and Important notes at the end of this document. Page 16 of 22 B32674 ... B32678 MKP DC link high power series Cautions and warnings Do not exceed the upper category temperature (UCT). Do not apply any mechanical stress to the capacitor terminals. Avoid any compressive, tensile or flexural stress. Do not move the capacitor after it has been soldered to the PC board. Do not pick up the PC board by the soldered capacitor. Do not place the capacitor on a PC board whose PTH hole spacing differs from the specified lead spacing. Do not exceed the specified time or temperature limits during soldering. Avoid external energy inputs, such as fire or electricity. Avoid overload of the capacitors. The table below summarizes the safety instructions that must always be observed. A detailed description can be found in the relevant sections of the chapters "General technical information" and "Mounting guidelines". Topic Storage conditions Flammability Resistance to vibration Safety information Reference chapter "General technical information" Make sure that capacitors are stored within the 4.5 specified range of time, temperature and humidity "Storage conditions" conditions. Avoid external energy, such as fire or electricity 5.3 (passive flammability), avoid overload of the "Flammability" capacitors (active flammability) and consider the flammability of materials. Do not exceed the tested ability to withstand 5.2 vibration. The capacitors are tested to "Resistance to vibration" IEC 60068-2-6. EPCOS offers film capacitors specially designed for operation under more severe vibration regimes such as those found in automotive applications. Consult our catalog "Film Capacitors for Automotive Electronics". Please read Cautions and warnings and Important notes at the end of this document. Page 17 of 22 B32674 ... B32678 MKP DC link high power series Topic Safety information Soldering Do not exceed the specified time or temperature limits during soldering. Cleaning Use only suitable solvents for cleaning capacitors. Embedding of When embedding finished circuit assemblies in capacitors in plastic resins, chemical and thermal influences finished assemblies must be taken into account. Caution: Consult us first, if you also wish to embed other uncoated component types! Please read Cautions and warnings and Important notes at the end of this document. Page 18 of 22 Reference chapter "Mounting guidelines" 1 "Soldering" 2 "Cleaning" 3 "Embedding of capacitors in finished assemblies" B32674 ... B32678 MKP DC link high power series Symbols and terms Symbol α αC A βC C CR ∆C ∆C/C ∆C/CR dt ∆t ∆T ∆tan δ ∆V dV/dt ∆V/∆t E ESL ESR f f1 f2 fr FD FT i IC English Heat transfer coefficient Temperature coefficient of capacitance Capacitor surface area Humidity coefficient of capacitance Capacitance Rated capacitance Absolute capacitance change Relative capacitance change (relative deviation of actual value) Capacitance tolerance (relative deviation from rated capacitance) Time differential Time interval Absolute temperature change (self-heating) Absolute change of dissipation factor Absolute voltage change Time differential of voltage function (rate of voltage rise) Voltage change per time interval Activation energy for diffusion Self-inductance Equivalent series resistance Frequency Frequency limit for reducing permissible AC voltage due to thermal limits German Wärmeübergangszahl Temperaturkoeffizient der Kapazität Kondensatoroberfläche Feuchtekoeffizient der Kapazität Kapazität Nennkapazität Absolute Kapazitätsänderung Relative Kapazitätsänderung (relative Abweichung vom Ist-Wert) Kapazitätstoleranz (relative Abweichung vom Nennwert) Differentielle Zeit Zeitintervall Absolute Temperaturänderung (Selbsterwärmung) Absolute Änderung des Verlustfaktors Absolute Spannungsänderung Differentielle Spannungsänderung (Spannungsflankensteilheit) Spannungsänderung pro Zeitintervall Aktivierungsenergie zur Diffusion Eigeninduktivität Ersatz-Serienwiderstand Frequenz Grenzfrequenz für thermisch bedingte Reduzierung der zulässigen Wechselspannung Frequency limit for reducing permissible Grenzfrequenz für strombedingte AC voltage due to current limit Reduzierung der zulässigen Wechselspannung Resonant frequency Resonanzfrequenz Thermal acceleration factor for diffusion Therm. Beschleunigungsfaktor zur Diffusion Derating factor Deratingfaktor Current (peak) Stromspitze Category current (max. continuous Kategoriestrom (max. Dauerstrom) current) Please read Cautions and warnings and Important notes at the end of this document. Page 19 of 22 B32674 ... B32678 MKP DC link high power series Symbol IRMS iz k0 LS λ λ0 λtest Pdiss Pgen Q ρ R R Ri Rins RP RS S t T τ tan δ tan δD tan δP tan δS TA Tmax Tmin tOL Top TR Tref tSL VAC English (Sinusoidal) alternating current, root-mean-square value Capacitance drift Pulse characteristic Series inductance Failure rate Constant failure rate during useful service life Failure rate, determined by tests Dissipated power Generated power Heat energy Density of water vapor in air Universal molar constant for gases Ohmic resistance of discharge circuit Internal resistance Insulation resistance Parallel resistance Series resistance severity (humidity test) Time Temperature Time constant Dissipation factor Dielectric component of dissipation factor Parallel component of dissipation factor Series component of dissipation factor Ambient temperature Upper category temperature Lower category temperature Operating life at operating temperature and voltage Operating temperature Rated temperature Reference temperature Reference service life AC voltage Please read Cautions and warnings and Important notes at the end of this document. German (Sinusförmiger) Wechselstrom Inkonstanz der Kapazität Impulskennwert Serieninduktivität Ausfallrate Konstante Ausfallrate in der Nutzungsphase Experimentell ermittelte Ausfallrate Abgegebene Verlustleistung Erzeugte Verlustleistung Wärmeenergie Dichte von Wasserdampf in Luft Allg. Molarkonstante für Gas Ohmscher Widerstand des Entladekreises Innenwiderstand Isolationswiderstand Parallelwiderstand Serienwiderstand Schärfegrad (Feuchtetest) Zeit Temperatur Zeitkonstante Verlustfaktor Dielektrischer Anteil des Verlustfaktors Parallelanteil des Verlfustfaktors Serienanteil des Verlustfaktors Umgebungstemperatur Obere Kategorietemperatur Untere Kategorietemperatur Betriebszeit bei Betriebstemperatur und -spannung Beriebstemperatur Nenntemperatur Referenztemperatur Referenz-Lebensdauer Wechselspannung Page 20 of 22 B32674 ... B32678 MKP DC link high power series Symbol VC VC,RMS English Category voltage Category AC voltage VCD Vch VDC VFB Vi Vo Vop Vp Vpp VR Corona-discharge onset voltage Charging voltage DC voltage Fly-back capacitor voltage Input voltage Output voltage Operating voltage Peak pulse voltage Peak-to-peak voltage Impedance Rated voltage Amplitude of rated AC voltage R VRMS German Kategoriespannung (Sinusförmige) Kategorie-Wechselspannung Teilentlade-Einsatzspannung Ladespannung Gleichspannung Spannung (Flyback) Eingangsspannung Ausgangssspannung Betriebsspannung Impuls-Spitzenspannung Spannungshub Nennspannung Amplitude der Nenn-Wechselspannung VSC Vsn (Sinusoidal) alternating voltage, root-mean-square value S-correction voltage Snubber capacitor voltage Z Impedance Spannung bei Anwendung "S-correction" Spannung bei Anwendung "Beschaltung" Scheinwiderstand Lead spacing Rastermaß Please read Cautions and warnings and Important notes at the end of this document. (Sinusförmige) Wechselspannung Page 21 of 22 Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. Page 22 of 22