Wire Wound Inductors (Ferrite Base) AISC-1210HS MSL level: 2 (This part is packed with dry packaging) Pb RoHS Compliant 3.20 x 3.05 x 1.30 mm | | | | | | | | | | | | | | | FEATURES: APPLICATIONS: • Excellent solderability and resistance soldering heat. • Suitable for RoHS compliant reflow. • High reliability and suitable for surface mount assembly. • Wide range of inductance value are available. • Small in tolerance from ±10%. • Notebooks, PC’s, • Cellular phone backlight, Inverter and etc. ELECTRICAL SPECIFICATIONS: PARAMETERS PARAMETERS ABRACON P/N: AISC-01210HS Series Operating temperature: -40°C to + 85°C Storage temperature: -10ºC to +40ºC, 20% to 70% RH Abracon Part Number L (µH) AISC-1210HS-2R2 AISC-1210HS-2R7 AISC-1210HS-3R3 AISC-1210HS-3R9 AISC-1210HS-4R7 AISC-1210HS-5R6 AISC-1210HS-6R8 AISC-1210HS-8R2 AISC-1210HS-100 AISC-1210HS-120 AISC-1210HS-150 AISC-1210HS-180 AISC-1210HS-220 AISC-1210HS-270 AISC-1210HS-330 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 Tolerance (K. M) K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M K. M Q Min 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 L, Q Test Freq (kHz/MHz) 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 100 / 1 SRF Min (MHz) 150 120 100 90 80 65 55 40 36 34 32 30 30 25 20 DCR Max (Ω) 0.5 0.6 0.75 0.8 0.95 1 1.1 1.3 1.5 1.6 1.9 2.9 3.5 4.2 5 ISAT Max (mA) 850 750 700 650 600 550 500 480 450 420 400 350 320 280 250 IDC Max (mA) 800 700 650 600 550 520 480 450 430 400 350 320 300 250 220 Test Equipment: 1. Inductance is measured in HP-4284A precision LCR meter with SMD-A fixture. 2. Q factor is measured in HP-4284A precision LCR meter with SMD-A fixture. 3. SRF is measured in Agilent E-5071B Network Analyzer. 4. RDC is measured in HP-4338B milliohm meter. 5. Isat: Based on inductance change (∆ L/Lo : ≤ -10%) 6. IDC: Based on temperature rise ( ∆ T : 25oC TYP. ) Unless otherwise specified, the standard range of atmospheric condition for making measurement and test are as follows: Ambient Temperature : 25°C (20°C) ± 2°C Relative Humidity : 60% t0 70% Air Pressure : 86Kpa to 106Kpa ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.08.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com Wire Wound Inductors (Ferrite Base) AISC-1210HS Pb RoHS Compliant 3.20 x 3.05 x 1.30 mm | | | | | | | | | | | | | | | ELECTRICAL CHARACTERISTICS AISC-1210HS-2R2K AISC-1210HS-2R2K AISC-1210HS-4R7K AISC-1210HS-4R7K AISC-1210HS-100K AISC-1210HS-100K AISC-1210HS-220K AISC-1210HS-220K ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.08.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com Wire Wound Inductors (Ferrite Base) AISC-1210HS Pb RoHS Compliant 3.20 x 3.05 x 1.30 mm | | | | | | | | | | | | | | | PART NUMBER IDENTIFICATION AISC-1210HS- Inductance Code Please refer to the table - Tolerance Code K: ±10% Packaging T2: Tape & Reel (2k pcs/Reel) M: ±20% OUTLINE DIMENSIONS T L 3.20±0.30 [0.126±0.012] L1 3.05±0.10 [0.12±0.004] W 2.50±0.30 [0.098±0.012] W1 2.40±0.10 [0.094±0.004] T 1.30 Max. [0.051 Max.] s 0.50±0.10 [0.02±0.004] Recommended Land Pattern A B C 4.00 1.70 2.82 Dimension: mm [inch] ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.08.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com Wire Wound Inductors (Ferrite Base) AISC-1210HS Pb RoHS Compliant 3.20 x 3.05 x 1.30 mm | | | | | | | | | | | | | | | REFLOW PROFILE TAPE & REEL: T2= tape and reel (2,000pcs/reel) A 2.69 B 3.56 P 4.00 F 3.50 K 1.42 T 0.22 W 8.00 Dimension: mm ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO ISO 9001 9001:2008 / QS 9000 CERTIFIED Revised: 12.08.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000| fax 949-546-8001| www.abracon.com