TDK MLG0402P0N2JT000 Multilayer ceramic Datasheet

I
N
D
U
C
T
O
R
S
February 2015
Inductors for High Frequency Circuits
Multilayer Ceramic
MLG-P Series
MLG0402P Type
MLG0402P
0402 [01005 inch]*
* Dimensions Code JIS[EIA]
(2/16)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(3/16)
I
N
D
U
C
T
O
R
S
Inductors for High Frequency Circuits
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Multilayer Ceramic
Overview of MLG0402P Type
FEATURES
High Q type inductor for high-frequency circuits.
Inductance range: from 0.2 to 33nH.
0.1n step inductance lineup.
Compared with existing products, the size was greatly reduced, making it optimal for fine-pitch circuits.
Optimal configuration that greatly improves the Q to 800MHz or higher.
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for Highfrequency.
APPLICATION
Smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
Series name
0402
L×W×H Dimensions
(mm)
0402
0.4×0.2×0.2
P
Characteristics
P
0N2
B
Inductance
(nH)
1N1
1.1
11N
11
Inductance
tolerance
B
±0.1nH
C
±0.2nH
S
±0.3nH
H
±3%
J
±5%
T
000
Packaging style
Internal code
T
Taping
000
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Operating
Storage
temperature
temperature
(pieces/reel)
（°C）
（°C）
MLG0402P
–55 to +125
–55 to +125
20000
The Storage temperature range is for after the circuit board is mounted.
Individual weight
Type
（mg）
0.07
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(4/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T: Temperature
T4
T3
T2
T3
t3
T1
t1
t2
t: Time
Preheating
Temp.
T1
T2
150°C
180°C
Time
t1
60 to 120s
Soldering
Temp.
Time
T3
t2
230°C
30 to 60s
Peak
Temp.
T4
250 to 260°C
Time
t3
10s max.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(5/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
0.20±0.02
SHAPE & DIMENSIONS
0.11±0.03
0.11±0.03
0.20±0.02
0.40±0.02
Dimensions in mm
0.18 to 0.20
RECOMMENDED LAND PATTERN
0.2
0.15 to 0.2
0.15 to 0.2
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(6/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
Tolerance
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
8
8
8
8
8
8
8
8
8
8
8
8
7
7
7
8
8
8
9
9
9
9
9
9
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.0
9.0
9.0
9.0
9.0
9.0
(: )max.
0.1
0.1
0.1
0.1
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
0.3
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
(mA)max.
350
350
350
350
350
350
350
350
350
350
350
350
350
320
320
320
320
320
320
320
320
320
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
220
220
220
220
220
220
200
200
200
MLG0402P0N2BT000
MLG0402P0N2CT000
MLG0402P0N3BT000
MLG0402P0N3CT000
MLG0402P0N4BT000
MLG0402P0N4CT000
MLG0402P0N4ST000
MLG0402P0N5BT000
MLG0402P0N5CT000
MLG0402P0N5ST000
MLG0402P0N6BT000
MLG0402P0N6CT000
MLG0402P0N6ST000
MLG0402P0N7BT000
MLG0402P0N7CT000
MLG0402P0N7ST000
MLG0402P0N8BT000
MLG0402P0N8CT000
MLG0402P0N8ST000
MLG0402P0N9BT000
MLG0402P0N9CT000
MLG0402P0N9ST000
MLG0402P1N0BT000
MLG0402P1N0CT000
MLG0402P1N0ST000
MLG0402P1N1BT000
MLG0402P1N1CT000
MLG0402P1N1ST000
MLG0402P1N2BT000
MLG0402P1N2CT000
MLG0402P1N2ST000
MLG0402P1N3BT000
MLG0402P1N3CT000
MLG0402P1N3ST000
MLG0402P1N4BT000
MLG0402P1N4CT000
MLG0402P1N4ST000
MLG0402P1N5BT000
MLG0402P1N5CT000
MLG0402P1N5ST000
MLG0402P1N6BT000
MLG0402P1N6CT000
MLG0402P1N6ST000
MLG0402P1N7BT000
MLG0402P1N7CT000
MLG0402P1N7ST000
(GHz)typ.
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
18.3
18.3
18.3
17.3
17.3
17.3
16.5
16.5
16.5
15.0
15.0
15.0
14.8
14.8
14.8
15.9
15.9
15.9
14.0
14.0
14.0
14.0
14.0
14.0
12.9
12.9
12.9
12.4
12.4
12.4
(: )typ.
0.03
0.03
0.03
0.03
0.07
0.07
0.07
0.08
0.08
0.08
0.11
0.11
0.11
0.13
0.13
0.13
0.11
0.11
0.11
0.15
0.15
0.15
0.20
0.20
0.20
0.22
0.22
0.22
0.25
0.25
0.25
0.28
0.28
0.28
0.30
0.30
0.30
0.37
0.37
0.37
0.25
0.25
0.25
0.25
0.25
0.25
* Short bar residual inductance =0.11nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16196D
Self-resonant frequency
8720C
DC resistance
4338A
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Agilent Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(7/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
Tolerance
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
9
9
9
9
9
9
9
9
9
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
7.0
(: )max.
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
(mA)max.
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
180
180
180
MLG0402P1N8BT000
MLG0402P1N8CT000
MLG0402P1N8ST000
MLG0402P1N9BT000
MLG0402P1N9CT000
MLG0402P1N9ST000
MLG0402P2N0BT000
MLG0402P2N0CT000
MLG0402P2N0ST000
MLG0402P2N1BT000
MLG0402P2N1CT000
MLG0402P2N1ST000
MLG0402P2N2BT000
MLG0402P2N2CT000
MLG0402P2N2ST000
MLG0402P2N3BT000
MLG0402P2N3CT000
MLG0402P2N3ST000
MLG0402P2N4BT000
MLG0402P2N4CT000
MLG0402P2N4ST000
MLG0402P2N5BT000
MLG0402P2N5CT000
MLG0402P2N5ST000
MLG0402P2N6BT000
MLG0402P2N6CT000
MLG0402P2N6ST000
MLG0402P2N7BT000
MLG0402P2N7CT000
MLG0402P2N7ST000
MLG0402P2N8BT000
MLG0402P2N8CT000
MLG0402P2N8ST000
MLG0402P2N9BT000
MLG0402P2N9CT000
MLG0402P2N9ST000
MLG0402P3N0BT000
MLG0402P3N0CT000
MLG0402P3N0ST000
MLG0402P3N1BT000
MLG0402P3N1CT000
MLG0402P3N1ST000
MLG0402P3N2BT000
MLG0402P3N2CT000
MLG0402P3N2ST000
(GHz)typ.
11.5
11.5
11.5
10.5
10.5
10.5
11.0
11.0
11.0
11.5
11.5
11.5
10.7
10.7
10.7
10.3
10.3
10.3
10.2
10.2
10.2
10.3
10.3
10.3
9.7
9.7
9.7
9.9
9.9
9.9
9.2
9.2
9.2
9.6
9.6
9.6
9.2
9.2
9.2
9.2
9.2
9.2
9.1
9.1
9.1
(: )typ.
0.28
0.28
0.28
0.27
0.27
0.27
0.30
0.30
0.30
0.36
0.36
0.36
0.43
0.43
0.43
0.46
0.46
0.46
0.43
0.43
0.43
0.54
0.54
0.54
0.54
0.54
0.54
0.54
0.54
0.54
0.52
0.52
0.52
0.45
0.45
0.45
0.58
0.58
0.58
0.66
0.66
0.66
0.73
0.73
0.73
* Short bar residual inductance =0.11nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16196D
Self-resonant frequency
8720C
DC resistance
4338A
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Agilent Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(8/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
Tolerance
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.1nH
±0.2nH
±0.3nH
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±0.3nH
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
(GHz)min.
6.5
6.5
6.5
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
4.5
4.5
(: )max.
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.5
1.5
(mA)max.
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
180
160
160
160
160
160
160
140
140
140
140
140
MLG0402P3N3BT000
MLG0402P3N3CT000
MLG0402P3N3ST000
MLG0402P3N4BT000
MLG0402P3N4CT000
MLG0402P3N4ST000
MLG0402P3N5BT000
MLG0402P3N5CT000
MLG0402P3N5ST000
MLG0402P3N6BT000
MLG0402P3N6CT000
MLG0402P3N6ST000
MLG0402P3N7BT000
MLG0402P3N7CT000
MLG0402P3N7ST000
MLG0402P3N8BT000
MLG0402P3N8CT000
MLG0402P3N8ST000
MLG0402P3N9BT000
MLG0402P3N9CT000
MLG0402P3N9ST000
MLG0402P4N0BT000
MLG0402P4N0CT000
MLG0402P4N0ST000
MLG0402P4N1BT000
MLG0402P4N1CT000
MLG0402P4N1ST000
MLG0402P4N2BT000
MLG0402P4N2CT000
MLG0402P4N2ST000
MLG0402P4N3ST000
MLG0402P4N3HT000
MLG0402P4N3JT000
MLG0402P4N7ST000
MLG0402P4N7HT000
MLG0402P4N7JT000
MLG0402P5N1ST000
MLG0402P5N1HT000
MLG0402P5N1JT000
MLG0402P5N6ST000
MLG0402P5N6HT000
MLG0402P5N6JT000
MLG0402P6N2HT000
MLG0402P6N2JT000
(GHz)typ.
8.6
8.6
8.6
8.6
8.6
8.6
8.3
8.3
8.3
8.3
8.3
8.3
8.0
8.0
8.0
7.8
7.8
7.8
7.6
7.6
7.6
7.5
7.5
7.5
7.9
7.9
7.9
7.9
7.9
7.9
8.0
8.0
8.0
7.2
7.2
7.2
7.0
7.0
7.0
6.8
6.8
6.8
6.5
6.5
(: )typ.
0.73
0.73
0.73
0.74
0.74
0.74
0.75
0.75
0.75
0.73
0.73
0.73
0.70
0.70
0.70
0.77
0.77
0.77
0.71
0.71
0.71
0.73
0.73
0.73
0.75
0.75
0.75
0.77
0.77
0.77
0.80
0.80
0.80
0.88
0.88
0.88
0.90
0.90
0.90
1.02
1.02
1.02
1.04
1.04
* Short bar residual inductance =0.11nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16196D
Self-resonant frequency
8720C
DC resistance
4338A
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Agilent Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(9/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
L
(nH)
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10.0
10.0
11.0
11.0
12.0
12.0
13.0
13.0
15.0
15.0
16.0
16.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
24.0
27.0
27.0
30.0
30.0
33.0
33.0
Tolerance
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
±3%
±5%
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Rated current
Part No.
min.
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
7
7
7
7
7
7
7
7
7
7
7
7
7
7
6
6
(MHz)
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
300
300
(GHz)min.
4.3
4.3
4.2
4.2
4.0
4.0
4.0
4.0
3.6
3.6
3.5
3.5
3.4
3.4
3.2
3.2
3.0
3.0
2.4
2.4
2.3
2.3
2.2
2.2
2.0
2.0
2.0
2.0
1.8
1.8
1.7
1.7
1.4
1.4
(: )max.
1.6
1.6
1.7
1.7
1.8
1.8
1.8
1.8
2.1
2.1
2.2
2.2
2.4
2.4
2.5
2.5
2.6
2.6
2.7
2.7
2.8
2.8
3.0
3.0
3.2
3.2
3.2
3.2
3.5
3.5
3.6
3.6
3.8
3.8
(mA)max.
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
140
130
130
130
130
120
120
120
120
120
120
120
120
MLG0402P6N8HT000
MLG0402P6N8JT000
MLG0402P7N5HT000
MLG0402P7N5JT000
MLG0402P8N2HT000
MLG0402P8N2JT000
MLG0402P9N1HT000
MLG0402P9N1JT000
MLG0402P10NHT000
MLG0402P10NJT000
MLG0402P11NHT000
MLG0402P11NJT000
MLG0402P12NHT000
MLG0402P12NJT000
MLG0402P13NHT000
MLG0402P13NJT000
MLG0402P15NHT000
MLG0402P15NJT000
MLG0402P16NHT000
MLG0402P16NJT000
MLG0402P18NHT000
MLG0402P18NJT000
MLG0402P20NHT000
MLG0402P20NJT000
MLG0402P22NHT000
MLG0402P22NJT000
MLG0402P24NHT000
MLG0402P24NJT000
MLG0402P27NHT000
MLG0402P27NJT000
MLG0402P30NHT000
MLG0402P30NJT000
MLG0402P33NHT000
MLG0402P33NJT000
(GHz)typ.
5.8
5.8
5.7
5.7
5.5
5.5
5.5
5.5
4.7
4.7
4.6
4.6
4.5
4.5
4.3
4.3
3.9
3.9
3.4
3.4
3.2
3.2
2.8
2.8
2.7
2.7
2.6
2.6
2.3
2.3
2.2
2.2
1.9
1.9
(: )typ.
1.12
1.12
1.13
1.13
1.16
1.16
1.20
1.20
1.45
1.45
1.51
1.51
1.64
1.64
1.71
1.71
1.77
1.77
1.79
1.79
1.94
1.94
2.09
2.09
2.18
2.18
2.30
2.30
2.44
2.44
2.56
2.56
2.71
2.71
* Short bar residual inductance =0.11nH
○ Measurement equipment
Measurement item
Product No.
L, Q
4291B+16196D
Self-resonant frequency
8720C
DC resistance
4338A
＊ Equivalent measurement equipment may be used.
Manufacturer
Agilent Technologies
Agilent Technologies
Agilent Technologies
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(10/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
Q typ.
800MHz
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
1.8GHz
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
2.0GHz
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
2.4GHz
0.2
0.2
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.6
0.6
0.6
0.7
0.7
0.7
0.8
0.8
0.8
0.9
0.9
0.9
1.0
1.0
1.0
1.1
1.1
1.1
1.2
1.2
1.2
1.3
1.3
1.3
1.4
1.4
1.4
1.5
1.5
1.5
1.6
1.6
1.6
1.7
1.7
1.7
500MHz
12
12
17
17
12
12
12
12
12
12
11
11
11
10
10
10
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
11
11
11
9
9
9
10
10
10
12
12
12
12
12
12
Part No.
800MHz
15
15
22
22
15
15
15
16
16
16
15
15
15
14
14
14
15
15
15
15
15
15
16
16
16
15
15
15
15
15
15
14
14
14
12
12
12
13
13
13
15
15
15
15
15
15
1.8GHz
23
23
35
35
22
22
22
25
25
25
23
23
23
22
22
22
23
23
23
23
23
23
24
24
24
23
23
23
23
23
23
23
23
23
20
20
20
21
21
21
24
24
24
23
23
23
2.0GHz
25
25
39
39
24
24
24
27
27
27
26
26
26
25
25
25
25
25
25
25
25
25
26
26
26
25
25
25
25
25
25
25
25
25
21
21
21
23
23
23
26
26
26
25
25
25
2.4GHz
29
29
44
44
26
26
26
30
30
30
29
29
29
28
28
28
27
27
27
27
27
27
29
29
29
28
28
28
27
27
27
28
28
28
24
24
24
25
25
25
29
29
29
28
28
28
MLG0402P0N2BT000
MLG0402P0N2CT000
MLG0402P0N3BT000
MLG0402P0N3CT000
MLG0402P0N4BT000
MLG0402P0N4CT000
MLG0402P0N4ST000
MLG0402P0N5BT000
MLG0402P0N5CT000
MLG0402P0N5ST000
MLG0402P0N6BT000
MLG0402P0N6CT000
MLG0402P0N6ST000
MLG0402P0N7BT000
MLG0402P0N7CT000
MLG0402P0N7ST000
MLG0402P0N8BT000
MLG0402P0N8CT000
MLG0402P0N8ST000
MLG0402P0N9BT000
MLG0402P0N9CT000
MLG0402P0N9ST000
MLG0402P1N0BT000
MLG0402P1N0CT000
MLG0402P1N0ST000
MLG0402P1N1BT000
MLG0402P1N1CT000
MLG0402P1N1ST000
MLG0402P1N2BT000
MLG0402P1N2CT000
MLG0402P1N2ST000
MLG0402P1N3BT000
MLG0402P1N3CT000
MLG0402P1N3ST000
MLG0402P1N4BT000
MLG0402P1N4CT000
MLG0402P1N4ST000
MLG0402P1N5BT000
MLG0402P1N5CT000
MLG0402P1N5ST000
MLG0402P1N6BT000
MLG0402P1N6CT000
MLG0402P1N6ST000
MLG0402P1N7BT000
MLG0402P1N7CT000
MLG0402P1N7ST000
○ Measurement equipment
Product No.
Manufacturer
4291B+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(11/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.1
3.1
3.1
3.2
3.2
3.2
Q typ.
800MHz
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
1.8GHz
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.6
2.6
2.6
2.8
2.8
2.8
2.8
2.8
2.8
2.9
2.9
2.9
2.9
2.9
2.9
3.1
3.1
3.1
2.0GHz
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.6
2.6
2.6
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
2.4GHz
1.8
1.8
1.8
1.9
1.9
1.9
2.0
2.0
2.0
2.1
2.1
2.1
2.2
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.4
2.5
2.5
2.5
2.6
2.6
2.6
2.7
2.7
2.7
2.8
2.8
2.8
2.9
2.9
2.9
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
500MHz
12
12
12
11
11
11
12
12
12
12
12
12
11
11
11
11
11
11
11
11
11
10
10
10
10
10
10
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10
10
10
Part No.
800MHz
15
15
15
15
15
15
15
15
15
15
15
15
14
14
14
14
14
14
14
14
14
13
13
13
13
13
13
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
1.8GHz
24
24
24
23
23
23
24
24
24
24
24
24
23
23
23
22
22
22
22
22
22
21
21
21
21
21
21
22
22
22
21
21
21
21
21
21
20
20
20
20
20
20
21
21
21
2.0GHz
26
26
26
24
24
24
26
26
26
26
26
26
24
24
24
24
24
24
24
24
24
23
23
23
23
23
23
24
24
24
23
23
23
23
23
23
22
22
22
22
22
22
22
22
22
2.4GHz
28
28
28
27
27
27
28
28
28
29
29
29
27
27
27
26
26
26
26
26
26
25
25
25
25
25
25
26
26
26
25
25
25
25
25
25
24
24
24
24
24
24
25
25
25
MLG0402P1N8BT000
MLG0402P1N8CT000
MLG0402P1N8ST000
MLG0402P1N9BT000
MLG0402P1N9CT000
MLG0402P1N9ST000
MLG0402P2N0BT000
MLG0402P2N0CT000
MLG0402P2N0ST000
MLG0402P2N1BT000
MLG0402P2N1CT000
MLG0402P2N1ST000
MLG0402P2N2BT000
MLG0402P2N2CT000
MLG0402P2N2ST000
MLG0402P2N3BT000
MLG0402P2N3CT000
MLG0402P2N3ST000
MLG0402P2N4BT000
MLG0402P2N4CT000
MLG0402P2N4ST000
MLG0402P2N5BT000
MLG0402P2N5CT000
MLG0402P2N5ST000
MLG0402P2N6BT000
MLG0402P2N6CT000
MLG0402P2N6ST000
MLG0402P2N7BT000
MLG0402P2N7CT000
MLG0402P2N7ST000
MLG0402P2N8BT000
MLG0402P2N8CT000
MLG0402P2N8ST000
MLG0402P2N9BT000
MLG0402P2N9CT000
MLG0402P2N9ST000
MLG0402P3N0BT000
MLG0402P3N0CT000
MLG0402P3N0ST000
MLG0402P3N1BT000
MLG0402P3N1CT000
MLG0402P3N1ST000
MLG0402P3N2BT000
MLG0402P3N2CT000
MLG0402P3N2ST000
○ Measurement equipment
Product No.
Manufacturer
4291B+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(12/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.6
5.6
5.6
6.2
6.2
Q typ.
800MHz
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.6
3.6
3.6
3.7
3.7
3.7
3.9
3.9
3.9
3.9
3.9
3.9
4.1
4.1
4.1
4.1
4.1
4.1
4.2
4.2
4.2
4.6
4.6
4.6
5.0
5.0
5.0
5.5
5.5
5.5
6.1
6.1
1.8GHz
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
3.9
3.9
3.9
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.7
4.7
4.7
5.1
5.1
5.1
5.7
5.7
5.7
6.3
6.3
2.0GHz
3.3
3.3
3.3
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
4.0
4.0
4.0
4.0
4.0
4.0
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.8
4.8
4.8
5.2
5.2
5.2
5.8
5.8
5.8
6.4
6.4
2.4GHz
3.3
3.3
3.3
3.4
3.4
3.4
3.6
3.6
3.6
3.6
3.6
3.6
3.7
3.7
3.7
3.8
3.8
3.8
4.1
4.1
4.1
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.3
4.4
4.4
4.4
4.9
4.9
4.9
5.3
5.3
5.3
5.9
5.9
5.9
6.6
6.6
500MHz
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
11
11
11
11
10
10
10
11
11
11
10
10
10
11
11
11
11
11
Part No.
800MHz
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
12
12
12
14
14
14
14
14
14
13
13
13
14
14
14
13
13
13
14
14
14
14
14
1.8GHz
21
21
21
20
20
20
20
20
20
20
20
20
19
19
19
20
20
20
19
19
19
18
18
18
22
22
22
21
21
21
20
20
20
21
21
21
20
20
20
21
21
21
20
20
2.0GHz
22
22
22
21
21
21
22
22
22
21
21
21
21
21
21
21
21
21
20
20
20
19
19
19
23
23
23
23
23
23
22
22
22
22
22
22
21
21
21
22
22
22
21
21
2.4GHz
24
24
24
23
23
23
24
24
24
23
23
23
22
22
22
23
23
23
21
21
21
21
21
21
26
26
26
25
25
25
24
24
24
24
24
24
22
22
22
24
24
24
22
22
MLG0402P3N3BT000
MLG0402P3N3CT000
MLG0402P3N3ST000
MLG0402P3N4BT000
MLG0402P3N4CT000
MLG0402P3N4ST000
MLG0402P3N5BT000
MLG0402P3N5CT000
MLG0402P3N5ST000
MLG0402P3N6BT000
MLG0402P3N6CT000
MLG0402P3N6ST000
MLG0402P3N7BT000
MLG0402P3N7CT000
MLG0402P3N7ST000
MLG0402P3N8BT000
MLG0402P3N8CT000
MLG0402P3N8ST000
MLG0402P3N9BT000
MLG0402P3N9CT000
MLG0402P3N9ST000
MLG0402P4N0BT000
MLG0402P4N0CT000
MLG0402P4N0ST000
MLG0402P4N1BT000
MLG0402P4N1CT000
MLG0402P4N1ST000
MLG0402P4N2BT000
MLG0402P4N2CT000
MLG0402P4N2ST000
MLG0402P4N3ST000
MLG0402P4N3HT000
MLG0402P4N3JT000
MLG0402P4N7ST000
MLG0402P4N7HT000
MLG0402P4N7JT000
MLG0402P5N1ST000
MLG0402P5N1HT000
MLG0402P5N1JT000
MLG0402P5N6ST000
MLG0402P5N6HT000
MLG0402P5N6JT000
MLG0402P6N2HT000
MLG0402P6N2JT000
○ Measurement equipment
Product No.
Manufacturer
4291B+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(13/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
500MHz
6.8
6.8
7.5
7.5
8.2
8.2
9.1
9.1
10.0
10.0
11.0
11.0
12.0
12.0
13.0
13.0
15.0
15.0
16.0
16.0
18.0
18.0
20.0
20.0
22.0
22.0
24.0
24.0
27.0
27.0
30.0
30.0
33.0
33.0
Q typ.
800MHz
6.7
6.7
7.4
7.4
8.1
8.1
9.0
9.0
10.0
10.0
11.0
11.0
12.0
12.0
13.0
13.0
15.0
15.0
16.2
16.2
18.3
18.3
20.4
20.4
22.6
22.6
24.7
24.7
28.0
28.0
31.7
31.7
35.0
35.0
1.8GHz
6.9
6.9
7.7
7.7
8.5
8.5
9.5
9.5
10.6
10.6
11.7
11.7
13.1
13.1
14.3
14.3
16.6
16.6
19.3
19.3
22.6
22.6
26.1
26.1
30.2
30.2
34.9
34.9
41.8
41.8
2.0GHz
7.1
7.1
7.8
7.8
8.7
8.7
9.8
9.8
10.9
10.9
12.1
12.1
13.6
13.6
15.0
15.0
17.4
17.4
21.1
21.1
25.1
25.1
29.6
29.6
35.3
35.3
2.4GHz
7.3
7.3
8.1
8.1
9.1
9.1
10.3
10.3
11.6
11.6
12.9
12.9
14.9
14.9
16.6
16.6
19.3
19.3
25.5
25.5
31.8
31.8
500MHz
11
11
11
11
11
11
12
12
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10
10
10
10
10
10
10
10
10
10
Part No.
800MHz
14
14
14
14
14
14
15
15
14
14
14
14
14
14
14
14
14
14
13
13
13
13
13
13
12
12
12
12
12
12
11
11
12
12
1.8GHz
20
20
20
20
20
20
21
21
20
20
19
19
18
18
18
18
17
17
16
16
15
15
14
14
13
13
11
11
11
11
2.0GHz
21
21
21
21
21
21
22
22
21
21
20
20
19
19
18
18
18
18
16
16
15
15
13
13
12
12
2.4GHz
23
23
22
22
22
22
22
22
22
22
20
20
19
19
18
18
17
17
14
14
12
12
MLG0402P6N8HT000
MLG0402P6N8JT000
MLG0402P7N5HT000
MLG0402P7N5JT000
MLG0402P8N2HT000
MLG0402P8N2JT000
MLG0402P9N1HT000
MLG0402P9N1JT000
MLG0402P10NHT000
MLG0402P10NJT000
MLG0402P11NHT000
MLG0402P11NJT000
MLG0402P12NHT000
MLG0402P12NJT000
MLG0402P13NHT000
MLG0402P13NJT000
MLG0402P15NHT000
MLG0402P15NJT000
MLG0402P16NHT000
MLG0402P16NJT000
MLG0402P18NHT000
MLG0402P18NJT000
MLG0402P20NHT000
MLG0402P20NJT000
MLG0402P22NHT000
MLG0402P22NJT000
MLG0402P24NHT000
MLG0402P24NJT000
MLG0402P27NHT000
MLG0402P27NJT000
MLG0402P30NHT000
MLG0402P30NJT000
MLG0402P33NHT000
MLG0402P33NJT000
○ Measurement equipment
Product No.
Manufacturer
4291B+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(14/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
33N
27N 22N
15N
18N
12N
10N
100
Inductance(nH)
8N2
6N8
10
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
1
0
10
100
1000
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(15/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
60
1N0
50
1N2
1N8
40
2N7
1N5
Q
2N2
3N3
30
4N7
5N6
6N8
20
3N9
12N
10N
18N
22N
15N
10
33N
0
10
100
1000
27N
8N2
10000
Frequency(MHz)
○ Measurement equipment
Product No.
Manufacturer
E4991A+16196D
Agilent Technologies
＊ Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm
(16/16)
I
N
D
U
C
T
O
R
S
MLG0402P Type
PACKAGING STYLE
REEL DIMENSIONS
ø60min.
1.0
2.0±0.5
8.4 +2.0
–0.0
ø13±0.2
14.4max.
ø21±0.8
ø180±2.0
Dimensions in mm
Cavity
3.5±0.05
1.5 +0.1
–0.0
Type
MLG0402P
MLG0402Q
MLG0603P
A
0.46±0.04
0.46±0.04
0.68±0.05
B
0.26±0.04
0.26±0.04
0.38±0.05
K
0.4 max.
0.4 max.
0.5 max.
A
8.0±0.3
Sprocket hole
1.75±0.1
TAPE DIMENSIONS
K
B
4.0±0.1
2.0±0.05
160min.
Drawing direction
Taping
2.0±0.05
200min.
300min.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20150216 / inductor_commercial_high-frequency_mlg0402p_en.fm