M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Product Features • • • • • • Tight stability performance (+/0.2 ppm) over Industrial Temperatures (-40°C to +85°C) (+/0.10 ppm) over Commercial Temperatures (0°C to 70°C) Available in 10 pad and 14 DIP configurations (Contact factory for 14 DIP) 3.0 V, 3.3 V and 5.0 V versions Low phase noise performance Tri-state Function standard Low G-sensitivity (0.6 ppb/G) version available N (10 Pad) Package Option Product Description MtronPTI’s M616x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products with extremely tight stability (to 0.10 ppm) over temperature and time. Specially processed crystals enable the M616x to achieve consistent long-term stability and minimal frequency shift after reflow. This processing also achieves excellent g-sensitivity (0.6 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M616x ideal for the design engineer working on all types of systems as the reference timing source. Ten pad SMT and 14-pin DIP compatible versions available. Product Applications The M616x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement, WLAN, WiMax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation and land mobile radio. Standard output for the M616x series is HCMOS compatible or clipped sinewave. The product is ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13 MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive applications. The M616x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from 8 to 40MHz and selective frequencies up to 52 MHz. Product Ordering Information Ordering Information M616x 1 J T C T 00.0000 MHz Product Series M6160: 5.0 V M6161: 3.3 V M6162: 3.0 V M6163: 5.0 V Low G M6164: 3.3 V Low G M6165: 3.0 V Low G Temperature Range 1: 0ºC to +70ºC 8: 0ºC to +50ºC 2: -40ºC to +85ºC F: -30ºC to +75ºC 6: -20ºC to +70ºC Stability L: ±4.6 ppm H: ±2.5 ppm K: ±2.0 ppm J: ±1.0 ppm G: ±0.5 ppm P: ±0.3 ppm M: ±0.2 ppm Q: ±0.14 ppm N: ±0.10 ppm Output Type T: Voltage Controlled With Tristate F: No Voltage Control With Tristate Output Waveform C: HCMOS S: Clipped Sine Wave Package/Lead Configurations N: 10 Pad Leadless Ceramic D: 14 DIP Frequency (customer specified) M6160Sxxx, M6161Sxxx, M6162Sxxx, M6163Sxxx, M6164Sxxx & M6165Sxxx - Contact factory for datasheets. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. Revision: 5-7-11 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Performance Characteristics Parameter Frequency Range Operating Temperature Storage Temperature Frequency Tolerance @ +25°C Frequency Stability Symbol FO TA TSTG Electrical Specifications Stability Vs. Reflow Frequency Vs. Supply Frequency Vs. Load Aging (First Year) Aging (First Year) Aging (10 Year) Aging (10 Year) Supply Voltage Tolerance Supply Current (ID) Output Logic Levels (HCMOS) Output Level (Clipped Sinewave) Waveform Symmetry Rise/Fall Time Output Load Frequency Adjustment G-Sensitivity Control Voltage Range Input Leakage Current Input Resistance Linearity Modulation Bandwidth Tristate Function Tristate Leakage Current Phase Noise Min. 8 -40 -55 -1.0 -1.0 -1.0 -2.0 -3.0 -5.0 -5.0 2.0 3.0 5.5 1.3 1.7 2.8 VOL VOH 80 1.0 0.8 40 -5.0 0.3 0.3 0.5 -50 100 Max. 52 +85 +125 +1.0 Units MHz °C °C ppm See Ordering Information +1.0 ppm ±0.02 ±0.1 ppm ±0.02 ±0.1 ppm +1.0 ppm +2.0 ppm +3.0 ppm +5.0 ppm +5.0 % 3.0 mA 4.0 mA 6.5 mA 1.9 mA 2.3 mA 3.5 mA 20 %VS %VS Vpk-pk Vpk-pk 60 % 6.5 ns 15 pF 10/10 Kohm/pF +5.0 ppm 0.6 ppb/g 2.7 Volts 3.0 Volts 4.5 Volts +50 µA Kohm 5 % 2 kHz 70 Conditions/Notes Contact factory above 40 MHz See Ordering Information For TCXO only (Fmax – Fmin)/2 For 5% supply voltage variation For 5% load variation F0 < 20 MHz F0 > 20 MHz F0 < 20 MHz (Includes first year) F0 > 20 MHz (Includes first year) See Ordering Information HCMOS output at 13 MHz HCMOS output at 26 MHz HCMOS output at 52 MHz Clipped sinewave output at 13 MHz Clipped sinewave output at 26 MHz Clipped sinewave output at 52 MHz IOH/IOL = ± 4 mA, Vs = +3.0 V IOH/IOL = ± 4 mA, Vs = +3.0 V Fo < 40 MHz Fo > 40 MHz Ref. to ½ VS. HCMOS only Ref. 10% to 90%. HCMOS only HCMOS output Clipped sinewave output Over Control Voltage Range For VS = 3.0 For VS = 3.3 For VS = 5.0 -98 %VS %VS µA dBc/Hz 10 Hz Offset -125 -145 -154 -156 dBc/Hz dBc/Hz dBc/Hz dBc/Hz 100 Hz Offset 1 KHz Offset 10 KHz Offset 100 kHz Offset 30 +100 -100 (Typical 20 MHz CMOS) Environmental Typ. Shock Vibration Solderability Package MIL-STD-202, Method 213, Condition C MIL-STD-202, Methods 201 & 204 EIAJ-STD-002 5.0 x 7.0 mm, SMT and DIP Max Soldering Conditions See solder profile Output enabled. Logic “1” or “Open” Output disabled. Logic “0” or “GND” 100 g 10 g from 10 to 2000 Hz RoHS Compliant MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 2 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Phase Noise Plot M616x 20 MHz Phase Noise Output Waveform (HCMOS Output) MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 3 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Product Dimension & Pinout Information - Package Code N (10 Pad) Pin Connections Function Pad N/C - Do Not Connect 1 N/C - Do Not Connect 2 N/C - Do Not Connect 3 Ground 4 Output 5 N/C - Do Not Connect 6 N/C - Do Not Connect 7 Tristate 8 Supply Voltage (Vs) 9 Control Voltage 10 SUGGESTED SOLDER PAD LAYOUT MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 4 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Handling Information Although protection circuitry has been designed into the M616x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Typical Test Circuits N/C Test Circuit - N Package With Tri-State MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 5 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Tape & Reel Specifications (all measurements are in mm) M616x A B C D E F G H J K L M N 5.40 7.40 1.55 7.50 2.60 2.00 4.00 16.00 330 13.00 20.20 100 16.40 Standard Tape and Reel: 1000 parts per reel Maximum Soldering Conditions Solder Conditions Note: Exceeding these limits may damage the device. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321. 6 M616x Series 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO Quality Parameters Environmental Specifications/Qualification Testing Performed on the M616x TCXO/TCVCXO Test Electrical Characteristics Frequency vs. Temperature Mechanical Shock Vibration Thermal Cycle Aging Gross Leak Fine Leak Solderability Resistance to Solvents Physical Dimensions Internal Visual Test Method Internal Specification Internal Specification MIL-STD-202, Method 213, C MIL-STD-202, Method 201-204 MIL-STD-883, Method 1010, B Internal Specification MIL-STD-202, Method 112 MIL-STD-202, Method 112 MIL-STD-883, Method 2003 MIL-STD-883, Method 2015 MIL-STD-883, Method 2016 Internal Specification Test Condition Per Specification Per Specification 100 g, 6 ms 10 g from 10-2000 Hz -55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles 168 Hours at 105 Degrees C 30 Second Immersion (Crystal Only) -8 Must meet 1x10 (Crystal Only) 8 Hour Steam Age – Must Exhibit 95% coverage Three 1 minute soaks Per Specification Per Internal Specification Load Circuit Load Circuit #7 - Clipped Sinewave Output Load Circuit #2 - HCMOS Output DUT Output DUT Output Test Point Test Point 10K Ohms C Load 10 pF Note: C Load includes probe and fixturing. Product Revision Table Date Revision PCN Number Details of Revision For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com 7