AMP1501 15W Me d i c a l Gr ade D es k t op S w i t c hi ng Po we r Ad a p te rs series Universal 90-264VAC Input Option “B” 2 Input Connection Options Option “A” Single Outputs from 5 to 36VDC 4000V Isolation LPS Efficiency Level V Splash Proof Case 4.11” x 1.65” x 1.22” Model Number Output Watts Output Voltage Output Amps Total Regulation (See Notes) *AMP1501-02(A or B) *AMP1501-03(A or B) *AMP1501-04(A or B) *AMP1501-05(A or B) *AMP1501-06(A or B) *AMP1501-07(A or B) *AMP1501-08(A or B) *AMP1501-09(A or B) *AMP1501-10(A or B) 13 13 15 15 15 15 15 15 15 5V 7V 9V 12V 15V 18V 24V 30V 36V 2.6A 1.85A 1.66A 1.25A 0.93A 0.83A 0.62A 0.5A 0.41A 5% 5% 5% 5% 5% 5% 3% 3% 3% Notes: *Denotes a choice of AC input connectors (A or B option). Please see Mechanical Dimensions. If not denoted, option “A” IEC-320-C14 input connector is used. On AMP1501-02, 03 and 04 a 16AWG/4FT output cable is necessary to achieve the Total Regulation specification listed. 18AWG/4FT is required for all other models. Low cost 3 Wire IEC320/C13 (Part Number ACCRD-C13) and 2 Wire IEC320/C7 (Part Number ACCRD-C7) Input Power Cords are available for these products. Inquire to the Astrodyne Sales Depart. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 AMP1501 15W Me d i c a l Gr ade D es k t op S w i t c hi ng Po we r Ad a p te rs INPUT SPECIFICATIONS Input Voltage Range Frequency Range Input Current Max. No Load Power Consumption Inrush Current, typ (Cold Start) Leakage Current GENERAL SPECIFICATIONS 90-264 VAC (Universal) 47-63 Hz Low Line (115VAC) High Line (230VAC) 0.3W @ 230VAC Low Line (115VAC) High Line (230VAC) 0.3mA MAX. @ 240 VAC, FL 0.33A 0.18A 16A max. 30A max. OUTPUT SPECIFICATIONS Voltage and Current Output Power Range Load Regulation (230Vin) Line Regulation Transient Response Temperature Coefficient Ripple/Noise Over Voltage Protection Over Current Protection Short Circuit Protection Thermal Shutdown Start Up / Hold Up Time series See Selection Charts 0 to FL Rating ± 5%, max. ± 1%, max. 100Vin, FL to 1/2L 4mS ±0.04%/°C, typ FL, 90Vin 1% Pk-Pk 112-132% 110-150% Continuous, self-recovering * -20 to 125°C 100Vin, FL 1S max. / 10 mS min. Input-Out Isolation Isolation Resistance Efficiency (FL, 230Vin) Safety 5656VDC (4000VAC) 50 MΩ min. 75%, typ (c)UL60601-1, EN60601-1 PHYSICAL SPECIFICATIONS Size Construction Weight 4.11” x 1.65” x 1.22” Desktop Style 6.0oz (170g) ENVIRONMENTAL SPECIFICATIONS 0 to +50°C (FL) * 50% Load @ 70°C (See Derate Curve) -40 to +85°C * 5% to 95%, non-cond * FCC Part 15 Class B EN55022B 100,000 Hrs V Oper. Temperature Storage Temperature Relative Humidity EMC 110Vin: MTBF Efficiency Level DERATE CURVE 100 80 60 40 20 0 10 20 30 40 50 60 70 All specifications are typical at nominal input, full load, and 25°C unless otherwise noted * These are stress ratings. Exposure of the devices to any of these conditions may adversely affect long term reliability. Proper operation under conditions other than the standard operating conditions is neither warranteed nor implied. WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 15W Me d i c a l Gr ade D es k t op S w i t c hi ng Po we r Ad a p te rs AMP1501 series MECHANICAL DIMENSIONS - AMP1501-XXA Output Cord Length 48” typ. DC OUTPUT CONNECTIONS Coaxial Plug 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” -Vout WWW.ASTRODYNETDI.COM +Vout ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 15W Me d i c a l Gr ade D es k t op S w i t c hi ng Po we r Ad a p te rs AMP1501 series MECHANICAL DIMENSIONS - AMP1501-XXB Output Cord Length 48” typ. DC OUTPUT CONNECTIONS Coaxial Plug 5.5mm outer diameter 2.1mm inner diameter, female 11mm length, center “+” -Vout WWW.ASTRODYNETDI.COM +Vout 5214 ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458