Lumileds L128-2780EA3500001 Perfected performance, built on a proven legacy Datasheet

Illumination
LUXEON 2835 Line
Perfected performance, built on a
proven legacy
LUXEON 2835 Line is a collection of compact devices that allows for
design freedom and provides a superior overall system solution when a
project requires high lumen output and good efficacy. With an industry
standard footprint, the LUXEON 2835 Line is the perfect upgrade for
other 2835 products and other common mid power offerings. The
LUXEON 2835 Line is color targeted for application needs and delivers
efficacy and reliability for a variety of applications. It is available in two
product offerings, LUXEON 2835C for higher output and LUXEON 2835E
for lower output ranges.
Features and Benefits
Primary Applications
Various configurations of voltage and die count to meet a wide range
of application requirements
Downlights
Industry standard footprint for drop-in replacement designs
High Bay & Low Bay
Maximum drive current of up to 240mA allows for reduction of LED count
Indoor Area Lighting
6V and 9V hot-color targeting and 1/9th micro-color binning enable tight
color control
–– TLEDs
3-, 4- and 5-step MacAdam ellipse color kits available
–– Troffers
Lamps
DS216 LUXEON 2835 Line Product Datasheet ©2018 Lumileds Holding B.V. All rights reserved.
No. E352519
Table of Contents
General Product Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Part Number Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Lumen Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Environmental Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Optical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical and Thermal Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Characteristics Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spectral Power Distribution Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Light Output Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Forward Current Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Radiation Pattern Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Product Bin and Labeling Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Decoding Product Bin Labeling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Luminous Flux Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Color Bin Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Forward Voltage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reflow Soldering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Packaging Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pocket Tape Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reel Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
i
General Product Information
Product Test Conditions
LUXEON 2835 Line LEDs are tested with a 20ms monopulse specified below at a junction temperature, Tj, of 25°C. Forward voltage
and luminous flux are binned at a Tj of 25°C. LUXEON 2835E 6V, LUXEON 2835E 9V and LUXEON 2835C 6V color is hot-targeted at
a Tj of 85°C and LUXEON 2835E 3V, LUXEON 2835C 3V and LUXEON 2835C 3V TVS color is cold-targeted at a Tj of 25°C.
60mA
–
LUXEON 2835E
120mA
–
LUXEON 2835C
Part Number Nomenclature
Part numbers for LUXEON 2835 Line follow the convention below:
L 1 2 8 – A A B B C D 3 5 0 0 0 E 1
Where:
A A –
designates nominal ANSI CCT (27=2700K, 30=3000K, 35=3500K, 40=4000K, 50=5000K, 57=5700K, 65=6500K)
B B –
designates minimum CRI (80=80CRI and 90=90CRI)
C
–
designates binning current (C=120mA and E=60mA)
D
–
designates voltage of the part (A=3V, B=6V and C=9V)
E
–
designates parts with Transient Voltage Suppressor (TVS) (T=TVS included)
Therefore, the following part number is used for a LUXEON 2835C 3000K 80CRI, 6V:
L 1 2 8 – 3 0 8 0 C B 3 5 0 0 0 0 1
Lumen Maintenance
Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the longterm performance of this product.
Environmental Compliance
Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 2835 Line
is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the
RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted
materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE).
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
2
Performance Characteristics
Product Selection Guide
Table 1. Product performance of LUXEON 2835 Line at specified test conditions.
Product
Voltage
9V
LUXEON
2835E
6V
3V
Nominal
CCT [1]
Minimum
CRI [2, 3]
Luminous Flux [2, 3] (lm)
Minimum
Typical
Typical
Luminous
Efficacy (lm/W)
Test
Current
(mA)
Part Number
6500K
70
78
86
158
60
L128-6570EC3500001
2200K
80
59
65
119
60
L128-2280EC3500001
2700K
80
67
75
137
60
L128-2780EC3500001
3000K
80
70
78
142
60
L128-3080EC3500001
3500K
80
72
80
147
60
L128-3580EC3500001
4000K
80
74
82
150
60
L128-4080EC3500001
5000K
80
74
82
150
60
L128-5080EC3500001
5700K
80
74
82
150
60
L128-5780EC3500001
6500K
80
74
82
150
60
L128-6580EC3500001
2200K
90
50
55
102
60
L128-2290EC3500001
2700K
90
54
62
114
60
L128-2790EC3500001
3000K
90
57
65
119
60
L128-3090EC3500001
3500K
90
60
68
124
60
L128-3590EC3500001
4000K
90
62
70
128
60
L128-4090EC3500001
5000K
90
62
70
128
60
L128-5090EC3500001
2700K
80
45
50
139
60
L128-2780EB3500001
3000K
80
46
51
142
60
L128-3080EB3500001
3500K
80
47
52
144
60
L128-3580EB3500001
4000K
80
49
54
150
60
L128-4080EB3500001
5000K
80
49
54
150
60
L128-5080EB3500001
5700K
80
49
54
150
60
L128-5780EB3500001
6500K
80
49
54
150
60
L128-6580EB3500001
2700K
80
23
25
137
60
L128-2780EA3500001
3000K
80
24
27
148
60
L128-3080EA3500001
3500K
80
24
28
154
60
L128-3580EA3500001
4000K
80
26
29
159
60
L128-4080EA3500001
5000K
80
26
29
159
60
L128-5080EA3500001
5700K
80
26
29
159
60
L128-5780EA3500001
6500K
80
26
29
159
60
L128-6580EA3500001
2700K
90
19
22
129
60
L128-2790EA3500001
3000K
90
20
22
129
60
L128-3090EA3500001
3500K
90
20
23
135
60
L128-3590EA3500001
4000K
90
21
24
140
60
L128-4090EA3500001
5000K
90
21
24
140
60
L128-5090EA3500001
5700K
90
21
25
146
60
L128-5790EA3500001
6500K
90
21
25
146
60
L128-6590EA3500001
Table 1 continued on next page.
1. Correlated color temperature is cold-targeted at Tj=25°C for 3V products (LUXEON 2835E 3V, LUXEON 2835C 3V, and LUXEON 2835C 3V TVS). Correlated color temperature is hot-targeted at
Tj=85°C for 6V and 9V products (LUXEON 2835E 6V, LUXEON 2835E 9V, and LUXEON 2835C 6V).
2. Luminous flux and CRI specs are based upon mounted package on highly reflective surface at Tj=25°C. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is
not guaranteed.
3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
3
Table 1. Product performance of LUXEON 2835 Line at specified test conditions (continued).
Product
Voltage
6V
LUXEON
2835C
3V
3V TVS
Nominal
CCT [1]
Minimum
CRI [2, 3]
2700K
80
Minimum
Typical
Typical
Luminous
Efficacy (lm/W)
93
105
141
Luminous Flux [2, 3] (lm)
Test
Current
(mA)
Part Number
120
L128-2780CB3500001
3000K
80
96
108
145
120
L128-3080CB3500001
3500K
80
99
111
149
120
L128-3580CB3500001
4000K
80
103
115
155
120
L128-4080CB3500001
5000K
80
103
115
155
120
L128-5080CB3500001
5700K
80
103
115
155
120
L128-5780CB3500001
6500K
80
103
115
155
120
L128-6580CB3500001
2700K
80
49
54
154
120
L128-2780CA3500001
3000K
80
51
56
160
120
L128-3080CA3500001
3500K
80
53
57
164
120
L128-3580CA3500001
4000K
80
55
60
168
120
L128-4080CA3500001
5000K
80
55
60
168
120
L128-5080CA3500001
5700K
80
55
60
168
120
L128-5780CA3500001
6500K
80
55
60
168
120
L128-6580CA3500001
2700K
90
42
47
132
120
L128-2790CA3500001
3000K
90
42
48
134
120
L128-3090CA3500001
3500K
90
44
50
139
120
L128-3590CA3500001
4000K
90
46
51
143
120
L128-4090CA3500001
5000K
90
46
51
143
120
L128-5090CA3500001
5700K
90
46
52
145
120
L128-5790CA3500001
6500K
90
46
52
145
120
L128-6590CA3500001
2700K
80
48
54
149
120
L128-2780CA35000T1
3000K
80
50
56
154
120
L128-3080CA35000T1
3500K
80
52
57
158
120
L128-3580CA35000T1
4000K
80
54
58
163
120
L128-4080CA35000T1
5000K
80
54
58
163
120
L128-5080CA35000T1
5700K
80
54
58
163
120
L128-5780CA35000T1
6500K
80
54
58
163
120
L128-6580CA35000T1
Notes for Table 1:
1. Correlated color temperature is cold-targeted at Tj=25°C for 3V products (LUXEON 2835E 3V, LUXEON 2835C 3V, and LUXEON 2835C 3V TVS). Correlated color temperature is hot-targeted at
Tj=85°C for 6V and 9V products (LUXEON 2835E 6V, LUXEON 2835E 9V, and LUXEON 2835C 6V).
2. Luminous flux and CRI specs are based upon mounted package on highly reflective surface at Tj=25°C. Typical CRI is approximately 2 points higher than the minimum CRI specified, but this is
not guaranteed.
3. Lumileds maintains a tolerance of ±2 on CRI and ±7.5% on luminous flux measurements.
Optical Characteristics
Table 2. Optical characteristics for LUXEON 2835 Line at test current, Tj=25°C.
Part Number
Typical Total Included Angle [1]
Typical Viewing Angle [2]
L128-xxxxxx35000x1
160°
120°
Notes for Table 2:
1. Total angle at which 90% of total luminous flux is captured.
2. Viewing angle is the off axis angle from the LED centerline where the luminous intensity is ½ of the peak value.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
4
Electrical and Thermal Characteristics
Table 3. Electrical and thermal characteristics for LUXEON 2835 Line at test current, Tj=25°C.
Forward Voltage [1] (Vf)
Typical Thermal
RESISTANCE—JUNCTION
to Solder Pad (°C/W)
Minimum
Typical
MAXIMUM
Typical Temperature
Coefficient of Forward
Voltage [2] (mV/°C)
L128-xxxxCA35000x1
2.9
3.0
3.2
-1.0 to -2.0
21
L128-xxxxCB3500001
5.8
6.1
6.6
-2.0 to -4.0
11
L128-xxxxEA3500001
2.7
3.0
3.3
-1.0 to -2.0
39
L128-xxxxEB3500001
5.8
6.1
6.6
-2.0 to -4.0
20
L128-xxxxEC3500001
8.7
9.1
9.9
-3.0 to -6.0
15
Part Number
Notes for Table 3:
1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.
2. Measured between 25°C and 85°C.
Absolute Maximum Ratings
Table 4. Absolute maximum ratings for LUXEON 2835 Line.
Parameter
DC Forward Current
Maximum Performance
150mA for L128-xxxxEC3500001
150mA for L128-xxxxEB3500001
150mA for L128-xxxxEA3500001
240mA for L128-xxxxCx3500001
[1, 2]
Peak Pulsed Forward Current [1, 3]
200mA for L128-xxxxEx3500001
300mA for L128-xxxxCx35000x1
LED Junction Temperature [1] (DC & Pulse)
115°C for L128-xxxxEA3500001
125°C for L128-xxxxEB3500001
125°C for L128-xxxxEC3500001
125°C for L128-xxxxCx3500001
ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012)
Class 3B for LUXEON 2835C 3V TVS with ESD protection
Class 2 for all other LUXEON 2835 parts
Operating Case Temperature [1]
-40°C to 105°C
LED Storage Temperature
-40°C to 105°C
Soldering Temperature
JEDEC 020c 260°C
Allowable Reflow Cycles
3
Reverse Voltage [4, 5] (Vreverse)
5
Notes for Table 4:
1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.
2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:
– The frequency of the ripple current is 100Hz or higher
– The average current for each cycle does not exceed the maximum allowable DC forward current
– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current
3. At ≤50% duty cycle with pulse width of 5ms.
4. Transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse
voltage does not exceed 5V and the reverse current is less than 220uA.
5. Max 5V reverse for up to 10s is an acceptable beginning of life, one time test condition.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
5
Characteristics Curves
Spectral Power Distribution Characteristics
Figure 1a. Typical normalized power vs. wavelength for 70CRI LUXEON 2835 Line at test current, Tj=25°C.
Figure 1b. Typical normalized power vs. wavelength for 80CRI LUXEON 2835 Line at test current, Tj=25°C.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
6
Figure 1c. Typical normalized power vs. wavelength for 90CRI LUXEON 2835 Line at test current, Tj=25°C.
Light Output Characteristics
Figure 2. Typical normalized light output vs. junction temperature for LUXEON 2835 Line at test current.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
7
LUXEON 2835E estimated typical ratio compared to flux at rated condition 60mA, Tj=25°C.
Product
30mA
50mA
80mA
100mA
120mA
2835E 3V
53%
85%
129%
158%
185%
2835E 6V
53%
85%
129%
156%
182%
2835E 9V
53%
85%
129%
156%
181%
LUXEON 2835C estimated typical ratio compared to flux at rated condition 120mA, Tj=25°C.
Product
50mA
65mA
100mA
150mA
200mA
2835C 3V
44%
56%
85%
123%
159%
2835C 6V
44%
56%
84%
123%
158%
Figure 3. Typical normalized light output vs. forward current for LUXEON 2835 Line at Tj=25°C.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
8
Forward Current Characteristics
LUXEON 2835E 9V
Figure 4a. Typical forward current vs. forward voltage for LUXEON 2835E 9V at Tj=25°C.
LUXEON 2835E 6V
LUXEON 2835C 6V
Figure 4b. Typical forward current vs. forward voltage for LUXEON 2835E 6V and LUXEON 2835C 6V at Tj=25°C.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
9
Figure 4c. Typical forward current vs. forward voltage for LUXEON 2835C 3V at Tj=25°C.
Radiation Pattern Characteristics
LUXEON 2835 Line
Figure 5. Typical radiation pattern for LUXEON 2835 Line at test current, Tj=25°C.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
10
LUXEON 2835 Line
Figure 6. Typical polar radiation pattern for LUXEON 2835 Line at test current, Tj=25°C.
Product Bin and Labeling Definitions
Decoding Product Bin Labeling
In the manufacturing of semiconductor products, there are variations in performance around the average values given in the
technical datasheet. For this reason, Lumileds bins LED components for luminous flux or radiometric power, color point, peak or
dominant wavelength and forward voltage.
LUXEON 2835 Line LEDs are labeled using a 4- or 5-digit alphanumeric CAT code following the format below:
Where:
A or Ax B C D
A or Ax – designates luminous flux bin (example: T=56 to 60 lumens, D2=29 to 31 lumens)
B C –
designates correlated color bin (example: 5D, 5E, 5F, 5G, 5H, 5J, 5K, 5L, 5M for 4000K parts)
D
designates forward voltage bin (example: W=3.0 to 3.1V, X=3.1 to 3.2V)
–
Therefore, a LUXEON 2835C 3V with a lumen range of 56 to 60, color bin of 5D and a forward voltage range of 3.0 to 3.1V has the
following CAT code:
T 5 D W
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
11
Luminous Flux Bins
Table 5 lists the standard luminous flux bins for LUXEON 2835 Line emitters. Although several bins are outlined, product
availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.
Table 5. Luminous flux bin definitions for LUXEON 2835 Line, Tj=25°C.
Product
Bin
Minimum
Maximum
19
21
B2
21
23
C1
23
25
C2
25
27
B1
LUXEON 2835E 3V
LUXEON 2835C 3V
LUXEON 2835C 3V TVS
LUXEON 2835E 6V
LUXEON 2835C 6V
LUXEON 2835E 9V
Luminous Flux [1] (lm)
D1
27
29
D2
29
31
E1
31
33
P
40
44
Q
44
48
R
48
52
S
52
56
T
56
60
U
60
65
V
65
70
W
70
75
Z
50
55
A
55
60
B
60
65
C
65
70
D
70
75
E
75
80
F
80
85
G
85
90
H
90
95
J
95
100
K
100
105
L
105
110
M
110
115
N
115
120
P
120
125
Q
125
130
Notes for Table 5:
1. Lumileds maintains a tolerance of ±7.5% on luminous flux measurements.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
12
Color Bin Definition
Figure 7. 3- and 5-step MacAdam ellipse illustration for Tables 6a–6g.
0.450
0.440
ANSI 2200K
0.430
AJ
CIE 1931y
AF
AE
0.420
AK
AD
0.410
AG
AH
AM
0.400
AL
0.390
0.380
0.470
0.480
0.490
0.500
CIE 1931 x
0.510
0.520
0.530
Figure 8a. 1/9th color bin structure for LUXEON 2835 Line 2200K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6a. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 2200K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
2200K
Single 3-step MacAdam ellipse
(0.5018, 0.4153)
0.00863
0.00398
49.27°
2200K
Single 5-step MacAdam ellipse
(0.5018, 0.4153)
0.01438
0.00663
49.27°
Notes for Table 6a:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
13
0.450
0.440
0.430
8J
CIE 1931y
0.420
0.410
8D
8G
8H
0.400
8L
8M
0.390
8K
8F
8E
2580K
2870K
0.380
0.370
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CIE 1931 x
Figure 8b. 1/9th color bin structure for LUXEON 2835 Line 2700K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6b. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 2700K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
2700K
Single 3-step MacAdam ellipse
(0.4578, 0.4101)
0.00810
0.00420
53.70°
2700K
Single 5-step MacAdam ellipse
(0.4578, 0.4101)
0.01350
0.00700
53.70°
Notes for Table 6b:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.445
0.435
0.425
7K
CIE 1931 y
0.415
7J
7E
7F
0.405
7D
0.395
7M
7H
7L
2870K
0.385
0.375
7G
3200K
0.365
0.4050.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.4600.465
CIE 1931 x
Figure 8c. 1/9th color bin structure for LUXEON 2835 Line 3000K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6c. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 3000K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
3000K
Single 3-step MacAdam ellipse
(0.4338, 0.4030)
0.00834
0.00408
53.22°
3000K
Single 5-step MacAdam ellipse
(0.4338, 0.4030)
0.01390
0.00680
53.22°
Notes for Table 6c:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
14
0.420
0.410
6K
0.400
6E
y
6F
6J
6D
0.390
6G
6H
0.380
6L
6M
3250K
0.370
3750K
0.360
0.380
0.390
0.400
0.410
0.420
0.430
0.440
x
Figure 8d. 1/9th color bin structure for LUXEON 2835 Line 3500K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6d. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 3500K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
3500K
Single 3-step MacAdam ellipse
(0.4073, 0.3917)
0.00927
0.00414
54.00°
3500K
Single 5-step MacAdam ellipse
(0.4073, 0.3917)
0.01545
0.00690
54.00°
Notes for Table 6d:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.420
0.410
0.400
CIE 1931 y
0.390
5F
5J
0.380
5E
5D
5G
0.370
5K
5L
5H
3750K
5M
0.360
4250K
0.350
0.340
0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410
CIE 1931 x
Figure 8e. 1/9th color bin structure for LUXEON 2835 Line 4000K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6e. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 4000K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
4000K
Single 3-step MacAdam ellipse
(0.3818, 0.3797)
0.00939
0.00402
53.72°
4000K
Single 5-step MacAdam ellipse
(0.3818, 0.3797)
0.01565
0.00670
53.72°
Notes for Table 6e:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
15
0.390
0.380
3K
0.370
3F
3J
CIE 1931 y
0.360
3E
3G
3D
0.350
3L
3H
4750K
3M
0.340
5250K
0.330
0.320
0.325
0.330
0.335
0.340
0.345
x
0.350
0.355
0.360
0.365
Figure 8f. 1/9th color bin structure for LUXEON 2835 Line 5000K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6f. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 5000K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
5000K
Single 3-step MacAdam ellipse
(0.3447, 0.3553)
0.00822
0.00354
59.62°
5000K
Single 5-step MacAdam ellipse
(0.3447, 0.3553)
0.01370
0.00590
59.62°
Notes for Table 6f:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
0.370
0.360
2K
0.350
2F
2J
y
2E
0.340
2D
2G
2L
5250K
2H
0.330
2M
6000K
0.320
0.310
0.310
0.315
0.320
0.325
0.330
0.335
0.340
0.345
0.350
x
Figure 8g. 1/9th color bin structure for LUXEON 2835 Line 5700K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6g. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 5700K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
5700K
Single 3-step MacAdam ellipse
(0.3287, 0.3417)
0.00746
0.00320
59.09°
5700K
Single 5-step MacAdam ellipse
(0.3287, 0.3417)
0.01243
0.00533
59.09°
Notes for Table 6g:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
16
0.365
0.355
0.345
CIE 1931 y
1K
1F
0.335
1J
1E
0.325
1D
1G
1L
6000K
1H
1M
0.315
7000K
0.305
0.295
0.290
0.295
0.300
0.305
0.310
0.315
0.320
0.325
0.330
0.335
x
Figure 8h. 1/9th color bin structure for LUXEON 2835 Line 6500K
at test current and binning temperatures of Tj=25°C and Tj=85°C.
Table 6h. 3- and 5-step MacAdam ellipse color bin definitions for LUXEON 2835 Line 6500K, at test and binning conditions.
Nominal CCT
Color Space
CENTER POINT [1]
(cx, cy)
Major Axis,
a
Minor Axis,
b
Ellipse Rotation
Angle, Θ
6500K
Single 3-step MacAdam ellipse
(0.3123, 0.3282)
0.00669
0.00285
58.57°
6500K
Single 5-step MacAdam ellipse
(0.3123, 0.3282)
0.01115
0.00475
58.57°
Notes for Table 6h:
1. Lumileds maintains a tolerance of ±0.007 on x and y color coordinates in the CIE 1931 color space.
Forward Voltage Bins
Table 7. Forward voltage bin definitions for LUXEON 2835 Line at test current, Tj=25°C.
Product
Number
LUXEON 2835E 9V
LUXEON 2835E 6V
LUXEON 2835C 6V
LUXEON 2835E 3V
LUXEON 2835C 3V
LUXEON 2835C TVS
Bin
Forward Voltage [1] (Vf)
Minimum
Maximum
V
8.70
9.00
W
9.00
9.30
X
9.30
9.60
Y
9.60
9.90
V
5.80
6.00
W
6.00
6.20
X
6.20
6.40
Y
6.40
6.60
F
5.60
5.80
G
5.80
6.00
H
6.00
6.20
J
6.20
6.40
S
2.70
2.80
T
2.80
2.90
V
2.90
3.00
W
3.00
3.10
X
3.10
3.20
Y
3.20
3.30
Notes for Table 7:
1. Lumileds maintains a tolerance of ±0.10V on forward voltage measurements.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
17
Mechanical Dimensions
Figure 9. Mechanical dimensions for LUXEON 2835 Line.
Notes for Figure 9:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
18
Reflow Soldering Guidelines
tp
Tp
Critical Zone
TL to Tp
Ramp-up
TL
Temperature
tL
Tsmax
Tsmin
Ramp-down
ts
Preheat Area
25
Time 25ºC to Peak
JEDEC J-STD-020D
Time
Figure 10. Visualization of the acceptable reflow temperature profile as specified in Table 8.
Table 8. Reflow profile characteristics for LUXEON 2835 Line.
PROFILE FEATURE
Lead-Free Assembly
Preheat Minimum Temperature (Tsmin)
150°C
Preheat Maximum Temperature (Tsmax)
200°C
Preheat Time (tsmin to tsmax)
60 to 120 seconds
Ramp-Up Rate (TL to Tp)
3°C / second maximum
Liquidus Temperature (TL)
217°C
Time Maintained Above Temperature TL (tL)
60 to 150 seconds
Peak / Classification Temperature (Tp)
260°C
Time Within 5°C of Actual Temperature (tp)
20 to 40 seconds
Ramp-Down Rate (Tp to TL)
6°C / second maximum
Time 25°C to Peak Temperature
8 minutes maximum
JEDEC Moisture Sensitivity
Table 9. Moisture sensitivity levels for LUXEON 2835 Line.
level
3
Floor Life
Soak Requirements Standard
TIme
Conditions
Time
Conditions
168 Hours
≤30°C / 60% RH
192 Hours +5 / -0
30°C / 60% RH
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
19
Solder Pad Design
Figure 11. Recommended PCB solder pad layout for LUXEON 2835 Line.
Notes for Figure 11:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
Packaging Information
Pocket Tape Dimensions
Figure 12. Pocket tape dimensions for LUXEON 2835 Line.
Notes for Figure 12:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
20
Reel Dimensions
8.8±0.3
Ø 3.7±0.3
Ø177.8±0.2
±0
.2
1±0.2
Ø 58.5±0.2
5.2
1±0.2
3±0.2
10.85±0.2
Ø21.7±0.3
10.8±0.3
Ø 8±0.2
Ø13.5±0.2
Figure 13. Reel dimensions for LUXEON 2835 Line.
Notes for Figure 13:
1. Drawings are not to scale.
2. All dimensions are in millimeters.
DS216 LUXEON 2835 Line Product Datasheet 20180118 ©2018 Lumileds Holding B.V. All rights reserved.
21
About Lumileds
Companies developing automotive, mobile, IoT and illumination lighting applications need a partner who can collaborate with
them to push the boundaries of light. With over 100 years of inventions and industry firsts, Lumileds is a global lighting solutions
company that helps customers around the world deliver differentiated solutions to gain and maintain a competitive edge. As the
inventor of Xenon technology, a pioneer in halogen lighting and the leader in high performance LEDs, Lumileds builds innovation,
quality and reliability into its technology, products and every customer engagement. Together with its customers, Lumileds is
making the world safer, better and more beautiful—with light.
To learn more about our lighting solutions, visit lumileds.com.
©2018 Lumileds Holding B.V. All rights reserved.
LUXEON is a registered trademark of the Lumileds
Holding B.V. in the United States and other countries.
lumileds.com
DS216 LUXEON 2835 Line
Product Datasheet 20180118
Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages,
direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds
Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials
and services information and data are provided “as is,” and neither Lumileds Holding B.V. nor its affiliates
warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding
B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and
user agreement with the download or use of the provided materials, information and data. A listing of Lumileds
product/patent coverage may be accessed at lumileds.com/patents.