ETC2 FP2-V120-R Flat-pac low profile inductors (surface mount) Datasheet

FLAT-PAC™
Low Profile Inductors
(Surface Mount)
Description
• 125°C maximum total temperature operation
• Surface mount inductors designed for higher
speed switch mode applications requiring
lower inductance and high current
• Dual conductors allow for low inductance and high
current or high inductance and lower current
• Inductance range from .047uH to 0.480uH
• Current range up to 42 Amps
• Meets UL 94V-0 flammability standard
• Ferrite core material
Applications
• Next generation microprocessors
Environmental Data
• Storage temperature range: -40°C to +125°C
• Operating ambient temperature range: -40°C to +125°C
(range is application specific).
• Solder reflow temperature: +260°C max. for 10 seconds
max.
Part
Number
Single Conductor
FP2-S047-R
FP2-S068-R
FP2-S082-R
FP2-S100-R
FP2-S120-R
FP2-S200-R
FP2-V050-R
FP2-V100-R
FP2-V120-R
FP2-V150-R
Double Conductor
FP2-D047-R
FP2-D068-R
FP2-D082-R
FP2-D100-R
FP2-D120-R
Part
Number
Double Conductor
FP2-D047-R
FP2-D068-R
FP2-D082-R
FP2-D100-R
FP2-D120-R
Inductance
µH
(rated)
OCL(1)
µH±
15%
0.047
0.068
0.082
0.100
0.120
0.047
0.068
0.082
0.100
0.120
0.047
0.068
0.082
0.100
0.120
0.200
0.050
0.100
0.120
0.150
Inductance
µH ref.
(rated)
0.188
0.272
0.328
0.400
0.480
0.047
0.068
0.082
0.100
0.120
0.200
0.050
0.100
0.120
0.150
OCL(1)
µH
ref.
0.188
0.272
0.328
0.400
0.480
Parallel Mode
I rMS(2)
I SAT(3)
Amps
Amps
39.0
39.0
39.0
39.0
39.0
37.0
37.0
37.0
37.0
37.0
42.0
32.0
26.0
22.0
18.0
19.0
70.0
40.0
33.0
25.5
37.0
42.0
37.0
32.0
37.0
26.0
37.0
22.0
37.0
18.0
Series Mode
I rMS(2)
I SAT(3)
Amps
Amps
16.0
16.0
16.0
16.0
16.0
Notes: (1) Open Circuit Inductance Test Parameters: 1MHz, 0.25Vrms, 0.0Adc.
(2) RMS current for an approximate ∆T of 40°C without core loss. It is
recommended that the temperature of the part not exceed 125°C.
(3) Peak current for approximately 30% rolloff at 20°C.
0714
Packaging
• Supplied in tape and reel packaging, 1700 (FP2-S and
FP2-D) and 950 (FP2-S200 and FP2-VXXX) per reel
21.0
16.0
13.0
11.0
9.0
DCr(4)
Ω
nom.
Height
0.00026
0.00026
0.00026
0.00026
0.00026
3.00
3.00
3.00
3.00
3.00
0.00024
0.00024
0.00024
0.00024
0.00024
0.00028
0.00028
0.00028
0.00028
0.00028
DCr(4)
Ω
ref.
0.0013
0.0013
0.0013
0.0013
0.0013
3.00
3.00
3.00
3.00
3.00
5.00
5.00
5.00
5.00
5.00
Height
3.00
3.00
3.00
3.00
3.00
Volt-µ
Sec (VµS)
ref.(5)
0.75
0.75
0.75
0.75
0.75
0.99
0.99
0.99
0.99
0.99
0.75
0.75
0.75
0.75
0.75
Volt-µ(5)
Sec (VµS)
ref.
1.50
1.50
1.50
1.50
1.50
(4) DCR limits 20°C.
(5) Applied Volt-Time product (V-µS) across the inductor. This value
represents the applied V-µS at 500kHz necessary to generate a core
loss equal to 10% of the total losses for 40°C temperature rise.
Page 1 of 4
Data Sheet PM-4110
FLAT-PAC™
Low Profile Inductors
(Surface Mount)
Mechanical Diagrams
Single Conductor
TOP VIEW
PCB PAD LAYOUT
SIDE VIEW
1
FRONT VIEW
(S or V)XXX
yww
SCHEMATIC
1
1.0 min.
(2x)
1
Height
mm Max
7.20
Max
7.50
1.30 ref.
(2x)
2
2.50 (2x)
3.0 ref.
2
2
6.50
(4x)
6.70
Max
Dual Conductor
PCB PAD LAYOUT
TOP VIEW
1
SIDE VIEW
4
0.50 (typ)
0.50
SCHEMATIC
FRONT VIEW
1
DXXX
yww
1
3.00 mm
Max
7.50
1.50
2
3 2.50 (2x)
6.70
Max
3.00
(4x)
Notes: (1) Marking SXXX = S: Single Conductor Style, DXXX = D: Dual
Conductor Style, XXX - last three digits of part number. Date Code:
yww = y: Last Digit of year, ww: week of year.
(2) All Dimensions are in millimeters unless otherwise specified.
1.5 Dia
min.
2.0
0714
12.0
3 2.50 (2x)
1.75
A
A
2
2
3
2 Winding Mode
7.5
1
Ao
Winding 2
(3) For parallel mode operation, connect terminals 1 to 4 and 2 to 3 on
PCB (use Single Conductor PCB Layout) For series mode operation,
connect terminals 2 to 4 on PCB (Dual Conductor Model).
1.5 Dia.
+0.1/-0.0
4.0
Bo
Ko
4
3.00
(4x)
Series Mode
Packaging Information
Winding 1
7.50
4.50
(2x)
1.30 ref.
(2x)
1.25 (2x)
ref.
3
Ao=6.6mm
Bo=7.1mm
Ko=3.2mm
Ko=5.2mm
(FP2?S200
& FP2V)
4
(4x)
7.20
Max
1.00 ref.
2
1
4
2
Direction of Feed
Page 2 of 4
16.0
+/-0.3
ACTUAL SIze
FLAT-PAC’S
➞
Data Sheet PM-4110
FLAT-PAC™
Low Profile Inductors
(Surface Mount)
Inductance
Characteristics
Core Loss
IRMS DERATING WITH CORE LOSS
40
50
60
10
0K
Hz
z
30
0K
H
20
0K
H
50
0K
Hz
80
z
70
1M
Hz
% of Losses from Irms (maximum)
0
20
90
92
94
95
96
97
98
99
10
20
30
40
50
60
80
100
200
300
400 500 600
800 1000
% of Applied Volt-µ-Seconds
0714
Page 3 of 4
Data Sheet PM-4110
FLAT-PAC™
Low Profile Inductors
(Surface Mount)
PM-4110 0714
Visit us on the Web at www.eaton.com/elx
eaton’s electrical Group
electronics Division
1225 Broken Sound Parkway NW
Suite F
Boca Raton, FL 33487-3533
Tel: 1-561-998-4100
Fax: 1-561-241-6640
Toll Free: 1-888-414-2645
The only controlled copy of this Data Sheet is the electronic read?only version located on the Bussmann Network Drive. A
copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive produ
provide technical information that will help the end user with design applications. Bussmann reserves the right, without
change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also re
right to change or update, without notice, any technical information contained in this bulletin. Once a product has been
should be tested by the user in all possible applications.
Life Support Policy: Bussmann does not authorize the use of any of its products for use in life support devices or syste
the express written approval of an officer of the Company. Life support systems are devices which support or sustain lif
failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonab
to result in significant injury to the user.
0714
Page 4 of 4
Data Sheet PM-4110
Similar pages