LED Display Product Data Sheet LTS-4817CKR-P Spec No.: DS30-2011-0115 Effective Date: 12/01/2011 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LED DISPLAY LTS-4817CKR-P DATA SHEET ITEM 1 2 Description New Spec 2.1 Modify packing dimensions. 2.2 Modify recommended soldering condition patterns. PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 By Eason Lin DATE 2010/09/23 Reo Lin 2011/09/21 PAGE: 0 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only FEATURES ＊0.39 inch (10.0 mm) DIGIT HEIGHT ＊CONTINUOUS UNIFORM SEGMENTS ＊LOW POWER REQUIREMENT ＊EXCELLENT CHARACTERS APPEARANCE ＊HIGH BRIGHTNESS & HIGH CONTRAST ＊WIDE VIEWING ANGLE ＊SOLID STATE RELIABILITY ＊CATEGORIZED FOR LUMINOUS INTENSITY ＊SMD DISPLAY ＊LEAD FREE PACKAGE (ACCORDING TO ROHS) DESCRIPTION The LTS-4817CKR-P is a 0.39 inch (10.0 mm) digit height single digit SMD display. This device uses AS-AlInGaP SUPER RED LED chips (AlInGaP epi on GaAs substrate). The display has gray face and white segments, and suitable for reverse mount assembly. DEVICE PART NO. AllnGaP RED LTS-4817CKR-P PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 DESCRIPTION Common Anode PAGE: 1 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKAGE DIMENSIONS Solder Pad Vs Painting Diagram P la stic b u rr 0 .1 4 m m M a x P a in tin g 0 .1 4 m m P a in tin g 4 0 0 μ in ch A u 4 μ in ch S o ld e r P a d PCB R e fle cto r N i 1 5 0 μ in ch M in C u 1 2 0 0 μ in ch M in S ca le : 5 :1 NOTES: 1. Plastic pins’ burr max. 0.14 mm, 2. All dimensions are in millimeters. Tolerances are 0.25mm (0.01“) unless otherwise noted. 3. Solder pad materials and thickness: Cu: 1200μinch Ni: Min 150μinch Au: 4μinch. PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 2 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only INTERNAL CIRCUIT DIAGRAM PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 3 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PIN CONNECTION No. CONNECTION 1 CATHODE E 2 CATHODE D 3 COMMON ANODE 4 CATHODE C 5 CATHODE D.P. 6 CATHODE B 7 CATHODE A 8 COMMON ANODE 9 CATHODE F 10 CATHODE G PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 4 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta = 25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Segment 70 mW Peak Forward Current Per Segment (Frequency 1Khz,10% duty cycle ) 90 mA 25 mA mA/°C Continuous Forward Current Per Segment Forward Current Derating from 25°C 0.27 -40°C to +105°C Operating Temperature Range -40°C to +105°C Storage Temperature Range Iron Soldering Conditions: 1/16 inch Below Seating Plane for 3 Seconds at 260°C ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta = 25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION 1301 4900 8600 μcd 639 nm Average Luminous Intensity Peak Emission Wavelength IV p Spectral Line Half-Width 20 nm IF=2mA Dominant Wavelength d 631 nm IF=2mA Forward Voltage Per Segment VF 2.05 2.6 V IF=20mA Reverse Current Per Segment(2) IR 100 uA VR=5V IV-m 2:1 Luminous Intensity Matching Ratio IF=2mA IF=2mA IF=2mA Note: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclairage) eye-response curve. 2. Reverse voltage is only for IR test. It can not continue to operate at this situation. PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 5 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only LUMINOUS INTENSITY BIN SELECTIONS: IF=2mA (Unit: ucd) (Only one BIN for each reel) Unit : μcd @2mA Luminous Intensity Rank Min. Max. J1 1301 1650 J2 1651 2100 K1 2101 2680 K2 2681 3400 L1 3401 4300 L2 4301 5400 M1 5401 6850 M2 6851 8600 Tolerance on each Intensity bin is +/-15% PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 6 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 7 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only SMT SOLDERING INSTRUCTION Note: 1. Recommended soldering condition: Reflow Soldering (Two times only) Pre-heat: 120~150°C. Pre-heat time: 120sec. Max. Peak temperature: 260°C Max. Soldering time: 5sec. Max. Soldering Iron (One time only) Temperature 300°C Max. Soldering time 3sec. Max. 2. Number of reflow process shall be less than 2 times, and cooling process to normal temperature is required between the first and the second soldering process. PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 8 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only RECOMMENDED SOLDERING PATTERN CUTOUT Note: All dimensions are in millimeters. PACKING REEL DIMENSIONS 330.0±2.0 01 2 34 8 9 10 1 7 5 6 1112 02 03 00 05 04 +1 29.4 -0.5 100.0±0.5 + 0.5 2 1 .0 2.0 -0 ± 0 .5 + 0.5 13.0 -0.2 PS 6 120° PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 +2 24.4 -0 PAGE: 9 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only PACKING CARRIER DIMENSIONS 1. Taping parts: 1. 2. 3. 4. 5. 6. 7. 10 sprocket ho le p itch cum ulativ e to lerance ± 0.20. C arrier cam b er is w ith in 1 m m in 250 m m . M aterial : T ransparent P olysty rene A lloy.(U P -7600) A ll dim ensio ns m eet E IA -48 1-C requ irem ents. T h ickn ess : 0.40 ± 0 .05m m . P ack in g leng th p er 2 2" reel : 45 .5 0 M eters. C o m p on en t lo ad p er 1 3" reel : 800 pcs. W 24.00± 0.30 A0 10.00± 0.10 A1 9.80± 0.10 B0 16.60± 0.10 B1 16.45± 0.10 K0 4.45± 0.10 K1 4.15± 0.10 2. Trailer part/ Leader part: (40m m M IN .) (400m m M IN .) (40m m M IN .) D IR E C T IO N O F P U L L IN G O U T PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 10 of 11 LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Moisture Proof Packaging All N/D SMD displays are shipped in moisture proof package. The displays should be stored at 30°C or less and 90% RH or less. Once the package opened, moisture absorption begins. UNITS IN A SEALED MOISTURE-PROOF PACKAGE PACKAGE IS OPENED (UNSEALED) YES ENVIRONMENT LESS THAN 30oC, AND LESS THAN 60% RH? BAKING IS NOT NECESSARY NO NO PACKAGE IS OPENED MORE THAN 1 WEEK DAYS? YES PERFORM RECOMMENDED BAKING CONDITIONS Baking Conditions If the parts are not stored in dry conditions, they must be baked before reflow to prevent damage to the parts. Package Temperature Time ≧48hours In Reel 60°C In Bulk 100°C ≧4hours 125°C ≧2hours Baking should only be done once. PART NO.:LTS-4817CKR-P BNS-OD-C131/A4 PAGE: 11 of 11