DC/DC Product Specification - 1/8th brick fully regulated DCDC converter. Rev 09/07/2012 AVO100B series Page 1 of 2 AVO100B-48S3V3 1/8th brick Input voltage: 36-75V Single Output: 3.3V Rated power: 99W Product Description th The AVO100B-48S3V3 is the latest high efficiency 1/8 brick. It operates from a wide input range of 36Vdc to 75Vdc and provides a regulated output voltage of 3.3Vdc. The output is rated to a power level up to 99Watts maximum. Its protection features include Non-latching OCP, OTP and OVP. It also has an enable pin on the primary side of the converter. The unit is an open frame design with base-plate option that is optimised for either contact-cooled applications or forced airflow applications. Special Features -2:1 Wide input range -Optimised for High density, small space applications -Low ripple and noise -Fixed switching frequency -High efficiency -High capacitive load capability -Basic insulation system -Through hole termination - Open frame structure with Base-plate option Specifications Feature Output power: Super high efficiency: Functions: Insulation: Safety UL: TUV/CE: Input specification Input range Input Surge Control specification Enable Output specification Output Voltage Trim range Output Current Ripple and noise Regulation Switching Frequency Isolation Voltage Transient response. 99W 92%(3.3V) Remote control, trim function, Sense; Input LVP, output OVP and OCP, OTP Open frame structure with base plate option. Basic Insulation UL60950 IEC/EN60950 36Vdc to 75Vdc 100V for 100mSec TTL compatible Positive or Negative enable 3.3V dc +10% to –20% Vout 30A 60mV pk-pk Load regulation = 20mV, Line regulation =10mV Fixed switching frequency 310Khz 1500Vdc 75mV deviation 100μs recovery (25%-50% Iout) Safety Environmental Specification -UL, cUL: UL60950 -TUV/CE: IEC/EN60950 Storage Temperature Ambient operating temp MTBF at 25degC OTP -55 to +125 deg C -40 to +85 deg C 2 Million hours (48V, Io=20A) 115 deg C(baseplate version) 120 deg C(open frame version) DC/DC Product Specification - 1/8th brick fully regulated DCDC converter. Mechanical Rev 09/07/2012 AVO100B series Page 2 of 2 Pin Assignments Pin # Function 1 +V in 2 Enable 3 -V in 4 -V out 5 - Sense 6 Trim 7 +Sense 8 +V out Ordering information Input Output Output Efficiency voltage voltage current 48V 3.3V 30A 92% 48V 3.3V 30A 92% 48V 3.3V 30A 92% 48V 3.3V 30A 92% 48V 3.3V 30A 92% 48V 3.3V 30A 92% 48V 3.3V 30A 92% Notes - Standard converter is Negative enable - ‘P’ = Positive enable - ‘B’ = Base-plate - ‘-S’ = Surface mount - ‘-6’ = 3.8mm pin length. ‘-Y’ = RoHS-5 compliant. - ‘-L’ = RoHS-6 compliant. - Part number AVO100B-48S3V3-6L AVO100B-48S3V3P-6L AVO100B-48S3V3SL AVO100B-48S3V3-6Y AVO100B-48S3V3P-6Y AVO100B-48S3V3B-6Y AVO100B-48S3V3PB-6Y Notes, 1\ 20Mhz bandwidth. External 10uF tantalum capacitor placed across +Vout and –Vout; 33 uF e-cap or equivalent placed across +Vin and –Vin. 2\ Efficiency measurements taken at full load and nominal line and Tamb = 25degC 3\ All specifications taken at nominal line, full load and Tamb = 25degC unless otherwise noted 4\ Mechanical dimensions are for reference only. Dimensions are in MM. Mechanical tolerance = +/0.5mmm 5\ Technical reference notes should be consulted for detailed information when available. 6\ All specifications subject to change without notice 7\ Warranty 2 years 8\ The through-hole terminated modules are intended for wave-soldering process – special request for other manufacturing processes to be made to Emerson