ITT MS27468G9B35PSB Cannon mil-dtl-38999 connector Datasheet

Interconnect Solutions
Cannon, VEAM, BIW
Cannon
MIL-DTL-38999
Connectors
Cannon, VEAM, BIW
A Historical Achievement of Technology Leadership
Defining and Championing Innovation
Showcasing a portfolio of creativity, ITT’s “Engineered For Life” execution embraces products which have
become ubiquitous in a broad collection of markets including: Military/Aerospace, Civil Aircraft, Industrial
Instrumentation, Medical, Oil & Gas, Energy, Transportation, Telecom/Handset, Computer, Consumer, and
Automotive.
ITT’s rich interconnect history embraces contributions to both technological breakthroughs and social
movements. With one of the industry’s broadest product offerings, ITT’s interconnect products have
supported:
•
Every Free World space mission, bringing the universe to our doorstep.
•
Motion picture, radio, and television equipment, serving laughter and entertainment to millions.
•
Commercial and military communications systems, linking the voices of the world.
•
Computerized tools, reshaping the information highway.
•
Aircraft, rapid transit, and automobiles, mobilizing our expanding society.
•
Oil and natural gas production, powering the world’s economies.
•
Agricultural equipment, attacking the roots of world hunger.
ITT Interconnect Solutions
ITT Interconnect Solutions is a division of the multinational ITT Corporation, a $9 billion dollar global
enterprise representing the brands Cannon, VEAM,
and BIW. Our connector portfolio remains the most
extensive in the industry offering the most reliable and
cost effective range of interconnect solutions. These
innovations have enabled ITT to provide products and
technologies to such markets as:
•
•
•
•
•
•
•
Automotive
Computer/Consumer
Industrial/Instrumentation
Military/Aerospace
Oil Fields
Telecom/Handset
Transportation
When you specify a Cannon, VEAM or BIW connector,
you can rely on a product designed, developed, and
manufactured to the highest quality and reliability
standards. This tradition of excellence is based on ITT’s
corporate culture of operating its businesses under the
principles of Six Sigma. At ITT, Six Sigma
is not just a quality philosophy but a complete
corporate culture that drives the entire business. Our
Value Based Management and Value Based Product
Development systems are two cornerstones that allow
for the development of both leadership and product
engineering principles, ensuring the correct industry
leading products are developed to the accepted
market driven lead times. These principles have
allowed ITT to become the market leader in all of our
business portfolios.
Six Sigma Manufacturing
ITT operates manufacturing facilities in the United
States, Germany, Italy, Mexico, China, Japan and the
UK, all of which have particular product area strengths
allowing ITT to offer a truly global footprint to our
customers. Our facilities are world class and
accommodate full vertical integration utilizing the latest
manufacturing technologies including: automated and
robotic machining centers, Super Market manufacturing cells, Kanban pull systems, and automated electrical, mechanical, and optical test and inspection equipment. The combination of our manufacturing strength
and our advanced manufacturing facilities allows ITT
www.ittcannon.com
to offer products at market driven prices. Our capabilities, especially in robotics, computerized precision tooling, Kaizen Project Management, Six Sigma tools, and
testing, give ITT the most optimized global manufacturing footprint in the interconnect industry.
The Custom Difference
As the industry leader in harsh environment interconnect applications, ITT’s world class engineering teams
will work directly with our customers to design and
develop cost effective solutions for their applications.
In many cases we may modify one of our standard
designs to ensure a highly reliable solution where
timing is critical. Yet, in those cases where a complete
custom interconnect solution is required, ITT will work
with our customer’s Engineers to design an interconnect solution which will be cost effective yet highly
reliable. As professional consultants, our Engineering
teams will provide a thorough systems and mechanical analysis of any proposed solution. These analyses
provide our customers with sophisticated electrical
signal and mechanical characterizations to determine
the best solution for their application.
RoHS Compliance Information
ITT has implemented a strict parts control plan for all
ITT electronics plants worldwide that allows the
Cannon, VEAM, and BIW connector product portfolios
to meet the requirements of European Union Directive
2002/95/EC better know as the Reduction of
Hazardous Substances initiative. As appropriate,
specific Cannon, VEAM, and BIW products may be
ordered with an R prefix number which insures our
customers will receive RoHS compliant parts for their
commercial electronics applications and equipment.
Since most RoHS hazardous substances center around
specific metal plating and lead solder coatings, ITT's
products for RoHS compliance are available in the following plating finishes: black zincelectroless nickel,
stainless steel, Anodize over aluminum and Gold plating. It should be noted that gold plating would be recommended as the replacement for tin-lead solder
when ordering board mount connectors.
Delivering solutions that perform ...
ITT offers an extensive array of connector and switch products and the ability to deliver standard or custom
solutions to meet the most stringent military requirements.
Our interconnect range includes sealed circulars, plastic and metal shell bayonet coupling circulars, miniature
metal shell circulars, PC board header connectors and sensor and direct device connectors. ITT is also a systems
supplier, providing value-added module and harness assemblies.
In addition to our MIL-DTL-38999 series, we also offer these connectivity solutions:
Cannon KPT / KPSE
Cannon Combo D-Sub
Environmentally sealed miniature circular connectors
available in two versions: KPT (solder contact) and
KPSE (high performance crimp contact). Intermateable
and intermountable with all MIL-C-26482 connectors
and is available with many materials, finishes and
configurations.
Product offering includes ability to integrate signal
and coax, high power, and high voltage.
Table of Contents
Specifications and Test Data . . . . . . . . . . . . . . . . .3-5
KJL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-9
KJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-15
Cannon CA-Bayonet
KJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-18
Signal and power connectors with exceptional
sealing against the ingress of fluids and will
withstand the effects of high vibrations.
Polarizing Positions . . . . . . . . . . . . . . . . . . . . . . . .19
Contact Arrangements . . . . . . . . . . . . . . . . . . . . . .20-21
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 -24
Torque Values / Wire Dimensions . . . . . . . . . . . . .25
Backshells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-28
Cannon Microminiature
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
High performance and reliability with exceptional
versatility. Available in rectangular, circular and
strip configurations, many of our connectors meet
or exceed the applicable requirements of the
MIL-DTL-83513 specification.
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . .30
MIL-DTL-38999 Specifications . . . . . . . . . . . . . . .31
ITT logo blocks and the composite ITT logo are registered
trademarks of ITT Industries. ©2005
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
2
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
SERIES I
SERIES II
SHELL HARDWARE
is aluminum alloy
GROUNDING FINGERS
(Standard on Series I connector)
WIRE SEALING
GROMMET
MONOBLOC
INSERT
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
CLOSED ENTRY
SOCKET CONTACT
DESIGN
SERIES III
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
INSULATOR
TO SHELL SEAL
INSULATOR
TO SHELL SEAL
WIRE SEALING
GROMMETS
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
WIRE SEALING
GROMMETS
PERIPHERAL
SEALING
GASKET
PERIPHERAL
SEALING
GASKET
INTERFACIAL
SEAL
CLOSED ENTERY
SOCKET CONTACT
DESIGN
PERIPHERAL SEAL
around the connector interface is
designed to minimize compression
set when connectors are mated
SIMPLER, STRONGER
CONTACTS
are designed to resist bending
and are crimp terminated
• Corrosion and zinc resistant shells of aluminum
alloy with cadmium and zinc over nickel plating
withstand a 500 hour salt spray exposure
• Rear release crimp snap-in contacts
• High contact density
• Standard MIL-C-39029 contacts, MIL-I-81969 application tools and MIL-STD 1560 insert
arrangements
•
•
•
•
GROUNDING FINGERS
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retentin with
inwardly deflected tines that lock
securely behind contact shoulder
RESILIENT PIN
INTERFACIAL SEALS
feature individual raised seal
barriers around each pin contact
Special/custom capabilities
100% scoop-proof - Series I and III
Light weight /Low Profile - Series II
Operates under severe high temperature vibration
testing through 200 C - engineered for high density circuitry - Series III
INTERFACIAL
SEAL
• Interfacial seal helps prevent electrolytic erosion of
contacts - Series III
• Superior EMI shielding provides outstanding protection up to 65dB at 10 GHZ. - Series III
Specification Comparison
Design Criteria
Series I
Series II
Series III
Low Profile/Light Weight
no
yes
no
Scoop Proof
yes
no
yes
Coupling System
Bayonet
Bayonet
Triple Lead Thread
Electrolytic Erosion
no
no
yes
Durability (Cycles)
500
250
500
High Impact Shock
yes
no
yes
Shell Size 25
650 in/lbs
150 in/lbs
1000 in/lbs
Random Vibration "J"
Ambient
Ambient
492 F
Sine Vibration
30G, Ambient
Sand, Dust, Ice
yes
Shell Size
9-25
External Bending Moment
60G, -85 to +392 F
yes
8-24
9-25
Contact Rating
Crimp Well Data
Contact
Size
Test Current
DC Test Amperage
22D
22M**
22**
20
16
12
5
3
5
7.5
13
23
Maximum
Millivolt Drop*
40
30
40
35
25
25
Well
Diameter
.0345 ± .0010
.0280 ± .0010
.0365 ± .0010
.0470 ± .0010
.0670 ± .0010
.1000 ± .0020
Well
Depth
.157/.141
.157/.141
.157/.141
.229/.209
.229/.209
.229/.209
* Maximum millivolt drop data is determined by measuring resistance of mated contacts from end to en
** For reference only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
3
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Performance and Material Specifications
MATERIALS AND FINISHES
Receptacle
Shell
Aluminum alloy
Insulator
High grade plastic
Contacts
Copper alloy, gold plate
Grommet and Seal
Silicone base elastomer
Jam Nut
Aluminum alloy
Grounding Spring
*Finish as noted in How To Order sections.
Grounded Plug
Aluminum alloy*
High grade plastic
Copper alloy, gold plate
Silicone base elastomer
Beryllium copper
ELECTRICAL DATA
Contact Size: 22D, 22M*, 22*, 20, 16 and 12
Contact Rating and Wire Size Accomodation
Wire
Size
22D
22M*
28
26
24
22
20
18
16
14
12
1.5
2.0
3.0
5.0
-
1.5
2.0
3.0
-
Contact Size and Test Amps
22*
20
2.0
3.0
5.0
-
3.0
5.0
7.5
-
16
12
7.5
10.0
13.0
-
17.0
23.0
*For reference only
Service Rating
Altitude
Sea Level
50,000 ft.
70,000 ft.
100,000 ft.
Service Rating M
Mated
Unmated
1300
800
800
800
1300
550
350
200
Service Rating N
Mated
Unmated
1000
600
600
600
1000
400
260
200
Service Rating I
Mated
Unmated
1800
1000
1000
1000
1800
600
400
200
Service Rating II
Mated
Unmated
2300
1000
1000
1000
2300
800
500
200
Test voltage, AC (rms)
Test Data
Test Description
Parameters
Durability
500 cycles of mating and unmating, 250 cycles for Series II with spring fingers
Temperature Range
Class F, N; - 65ºC (-85ºF) to + 200ºC (+392ºF) Class A; - 65ºC (-85ºF) to + 150ºC (+302ºF)
Class B,W: - 65ºC (-85ºF) to + 175ºC (+347ºF)
Mated connectors are vibrated with weights to simulate rear accessory loads to
the following levels:
Sine Vibration:
Up to 60 G's - Series I & III (at rated temperature - Series III)
Not applicable for Series II.
Random Vibration: 43.7 Grms at rated temperature - Series III
49.5 Grms at Ambient Temperature - Series I & III
43.7 Grms at Ambient Temperature - Series II
Vibration
EMI Shielding
Effectiveness
Class F: EMI leakage attenuation, greater than 90dB at 100Mhz, greater than 65dB
at 10 GHz. Shell to shell conductivity, 1.0 millivolt max. resistance.
Class W: EMI leakage attenuation, greater than 90dB at 100 MHz, greater than 50dB
at 10 GHz. Shell to shell conductivity, 2.5 millivolt max.
Corrosion Resistant
Class B, W, and Z will withstand 500 hours salt spray.
Class A, F, N, will withstand 48 hours salt spray.
Fluid Immersion
Connectors are fluid resistant to many fuels, solvents, coolants and oils.
High Impact Shock
Mated conectors terminated with MIL-C-915 cable and environmentally sealed
backshells will withstand high impact shock per MIL-S-901. Applicable to Series
I & III only.
Altitude
Designed to operate between sea level and 100,000 ft. above sea level.
Other Environments
Mated connectors shall withstand sand and dust per method 110 of MIL-STD-202 and
be ice resistant. Applicable to Series I & III only.
NOTE: For hermetic standard or test data please consult ITT.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
4
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Insert Availability and Identification
Series
II
8-35
8-98
10-5
10-35
10-98
10-99
12-3
12-4
12-8
12-35
12-98
14-5
14-15
14-18
14-35
14-97
16-6
16-8
16-26
16-35
16-99
18-11
18-28
18-30
18-32
18-35
20-16
20-35
20-39
20-41
22-21
22-32
22-35
22-53
22-55
24-4
24-24
24-29
24-35
24-61
Series
I & III
9-35
9-98
11-4
11-5
11-35
11-98
11-99
13-4
13-8
13-35
13-98
15-5
15-15
15-18
15-19
15-35
15-97
17-6
17-8
17-26
17-35
17-99
19-11
19-28
19-30
19-32
19-35
21-11
21-16
21-35
21-39
21-41
21-75
23-21
23-32
23-35
23-53
23-55
25-4
25-19
25-24
25-29
25-35
25-37
25-43
25-46
25-8
25-20
25-42
25-61
25-64
25-66
* Coax for RG-180 cables
** Coax for RG-174, -179, or -316 cables
*** Twinax for M17/176-00002 cables
(check factory for other cable applications)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
5
Total
Service
Contacts
Rating
M
6
I
3
I
4
I
5
M
13
I
6
I
7
II
3
I
4
I
8
M
22
I
10
II
5
I
15
I
18
I
19
M
37
I
12
I
6
II
8
I
26
M
55
I
23
II
11
I
28
I
30
I
32
M
66
I
11
II
16
M
79
I
39
I
41
M
4
II
21
I
32
M
100
I
53
I
55
I
56
I
19
I
24
I
29
M
128
I
37
I
43
I, Twinax
46
Twinax
8
N, Coax, Twinax
30
I, Coax
42
I
61
I
64
I
66
Contact Size
22D
6
20
16
12
8
3
4
5
13
6
7
3
4
8
22
10
14
18
19
5
1
37
8
4
6
8
26
55
21
26
29
32
2
11
2
1
66
11
16
79
37
41
2
4***
21
32
100
53
55
48
8
12
29
19
12
128
23
40
40
53
10
38
61
8
2
37
20
4
13
4**
10
11
6
2***
8***
3***
4*
Cannon KJL
MIL-DTL-38999 Series I Connectors
How To Order
Military Nomenclature
MS27467 T 17 B 35 S
MS NUMBER SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
MS NUMBER SHELL STYLE
MS27466 - Wall Mounting Receptacle
MS27468 - Jam Nut Receptacle
MS27467 - Grounded Plug
MS27656 - Wall Mounting Receptacle
(back panel mounting)
MS27505 - Box Mounting Receptacle
(back panel) (Class E)
CLASS
E - Inactive for new design.
Superseded by Class T.
G - Environmental resistant Space Grade
P - Environment - resistant with straight potting
cup accessories
T - Environment - resistant with accessory threads
and teeth, except MS27505 (without rear
accessory) (Class T not applicable to MS27505)
POLARIZING POSITION
SHELL SIZE
9, 11, 13, 15, 17, 19, 21, 23, and 25
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, 85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
F - Electroless nickel, -85ºF to +392ºF
(-65ºC to +200ºC)
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
POLARIZING POSITION
A,B,C, and D. (No letters required for normal).
See page 19.
CONTACT ARRANGEMENT
See pages 20 and 21.
Note: To order MS connectors less standard power
contacts, purchase order must state "Less Contacts"
Cannon Nomenclature
KJL 6 T 17 B 35 S N
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
SERIES PREFIX
KJL - Series I-Scoop proof
CONTACT STYLE
POLARIZING POSITION
SHELL STYLE
0 - Wall mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
4 - Thru bulkhead receptacle
5 - Box mounting receptacle (back panel mounting)
6 - Straight plug, grounded
7 - Jam nut receptacle
CLASS
E - Inactive for new design.
Superseded by Class T.
G - Environmental resistant - Space Grade
F - Environment - resistant with strain relief
accessory
P - Environment - resistant with straight potting
cup accessory
T - Environment - resistant (without rear
accessory) (Class T not applicable to KJL5)
MODIFICATION CODE
SHELL SIZE
9,11,13,15,17,19,21,23 and 25
CONTACT ARRANGEMENT
See pages 20 and 21.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, 85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to + 175ºC)
N - Electroless nickel, -85ºF to +392ºF (-65ºC to
+200ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a finish modification code
CONTACT STYLE
P - Pin
S - Socket
PS - Pin-Socket (Shell style 4 only)
POLARIZING POSITION
N (normal), A, B, C, D. See page 19.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
27- Outgassed, standard connector
A296 Black Zinc Cobalt, RoHS Compliant
T69 Olive Drab (Green) Zinc Cobalt
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
6
www.ittcannon.com
Cannon KJL
MIL-DTL-38999 Series I Connectors
Wall Mounting Receptacle
MS27466
(MS service class E, P, T)
KJL0
POLARIZING
KEYWAY
J DIA.
MAX.
M
1.240
(31.50)
MAX.
L
N
H
T THREAD
A
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Overall Length With Backshells
Shell
Size
9
11
13
15
17
19
21
23
25
A
Dia. Max.
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
H
Max.
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
J
Dia. Max.
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
L
Max.
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.632 (16.05)
.602 (15.29)
.602 (15.29)
.602 (15.29)
M
Max.
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
N
T.P.
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
P
Dia. Max.
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
F
Cable Clamp
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.966 (49.94)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
P
Potting Max.
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
Wall Mounting Receptacle (Back Panel)
MS27656
(MS service class E, P, T)
KJL3
J DIA.
MAX.
M
1.247
(31.67)
MAX.
L
POLARIZING
KEYWAY
N
H
T
THREAD
A
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
E MAX.
PANEL
THICKNESS
(including mounting hardware)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Shell
Size
A
Dia. Max.
E
Max.
H
Max.
J
Dia. Max.
L
Max.
M
Max.
N
T.P.
P
Dia. Max.
9
11
13
15
17
19
21
23
25
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.204 (5.18)
.204 (5.18)
.193 (4.90)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
Overall Length With Backshells
F
P
Cable Clamp Potting Max.
1.805 (45.85)
1.805 (45.85)
1.805 (45.85)
1.805 (45.85)
1.935 (48.90)
1.955 (49.66)
1.955 (49.66)
1.955 (49.66)
1.955 (49.66)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
1.410 (35.81)
Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29. Contact Arrangements - Pages 20 and 28.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
7
Cannon KJL
MIL-DTL-38999 Series I Connectors
Box Mounting Receptacle (Back Panel)
MS27505E
(MS service class E)
KJL5E
L
K
MAX.
H
M
.060
(1.52)
MAX.
GROMMET
POLARIZING
KEYWAY
J DIA.
MAX.
A
N
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
E MAX.
PANEL THICKNESS
(INCLUDING MOUNTING
HARDWARE)
NOTE: This connector does not accommodate backshells.
Shell
Size
9
11
13
15
17
19
21
23
25
A
Dia. Max.
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
E
Max.
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.204 (5.18)
.204 (5.18)
.193 (4.90)
H
Max.
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
J
Dia. Max.
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
K
Max.
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.250 (6.35)
.250 (6.35)
.250 (6.35)
L
Max.
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
M
Max.
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
N
T.P.
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
P
Dia. Max.
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
Straight Plug Grounded
MS27467
(MS service class E, P, T)
KJL6
L
POLARIZING
KEYWAY
J DIA.
T THREAD
A DIA.
G
DIA.
MAX.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Shell
Size
A
Max.
G
Dia. Max.
J
Dia. Max.
(Class T)
L
Max.
T
Thread
9
11
13
15
17
19
21
23
25
.585 (14.86)
.717 (18.21)
.866 (22.00)
.990 (25.15)
1.115 (28.32)
1.222 (31.04)
1.347 (34.21)
1.472 (37.39)
1.597 (40.56)
.859 (21.82)
.984 (24.99)
1.156 (29.36)
1.281 (32.54)
1.406 (35.71)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.891 (48.03)
.483 (12.27)
.611 (15.52)
.760 (19.30)
.885 (22.48)
1.010 (25.65)
1.115 (28.32)
1.240 (31.50)
1.365 (34.67)
1.490 (37.85)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
Overall Length With Backshells
F
P
Cable Clamp
Potting Max.
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.913 (48.59)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.766 (44.86)
1.766 (44.86)
1.766 (44.86)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28 and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
8
www.ittcannon.com
Cannon KJL
MIL-DTL-38999 Series I Connectors
Jam Nut Receptacle
MS27468
(MS service class E,P,T)
KJL7
.125 (3.18) MAX.
.062 (1.57) MIN.
PANEL THICKNESS
.920 (23.37) MAX.
U MAX.
HEX
H
POLARIZING
KEYWAY
T THREAD
J DIA.
D
A
DIA. DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
S
V THREAD
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Overall Length With Backshells
Shell
Size
9
11
13
15
17
19
21
23
25
A
Dia. Max.
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
D
H
Max.
Max.
.655 (16.64) .120 (3.05)
.755 (19.18) .120 (3.05)
.942 (23.93) .120 (3.05)
1.066 (27.08) .120 (3.05)
1.191 (30.25) .120 (3.05)
1.316 (33.43) .151 (3.84)
1.441 (36.60) .151 (3.84)
1.566 (39.78) .151 (3.84)
1.691 (42.95) .151 (3.84)
J
Dia. Max.
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
S
Dia. Max.
1.204 (30.58)
1.391 (35.33)
1.516 (35.51)
1.641 (41.68)
1.766 (44.86)
1.954 (49.63)
2.078 (52.78)
2.204 (55.98)
2.328 (59.13)
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
U
Max. Hex.
.892 (22.66)
1.017 (25.83)
1.205 (30.61)
1.329 (33.76)
1.455 (36.96)
1.579 (40.11)
1.705 (43.31)
1.829 (46.46)
20.17 (51.23)
V
Thread Class 2A
11/16-24UNEF
13/16-24UNEF
1-20UNEF
1-1/8-18UNEF
1-1/4-18UNEF
1-3/8-18UNEF
1-1/2-18UNEF
1-5/8-18UNEF
1-3/4-18UNS
F
Cable Clamp
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.966 (49.94)
1.996 (50.70)
1.996 (50.70)
1.996 (50.70)
1.996 (50.70)
P
Potting Max.
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 20, 28, and 29.
Contact Arrangements - Pages 20, 21.
Panel Cutouts
Jam Nut Receptacles
Flange Mounted Receptacles
P ± .005 (0.13)
4 HOLES
A
R
(T.P)
B
A
+.010 (0.25)
-.000 (0.00)
(Class T)
Shell
Size
9
11
13
15
17
19
21
23
25
A
Dia.
.665 (16.89)
.812 (20.62)
.965 (24.51)
1.085 (27.55)
1.250 (31.75)
1.322 (33.57)
1.447 (36.75)
1.569 (39.85)
1.703 (43.25)
P
Dia.
R
Mtg.
Screw
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
#4
#4
#4
#4
#4
#4
#4
#6
#6
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
9
Shell
Size
9
11
13
15
17
19
21
23
25
A
+.010 (.25)
-.000 (.00)
.700 (17.78)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
B
+.000 (.00)
-.010 (.25)
.670 (17.02)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
Cannon KJ
MIL-DTL-38999 Series II Connectors
How To Order
Military Nomenclature
MS27473
T
18
F
35
S
MS NUMBER SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
MS NUMBER SHELL STYLE
MS27472 - Wall Mounting Receptacle
MS27473 - Straight Plug
MS27474 - Jam Nut Receptacle
MS27484 - Grounded Plug
MS27497 - Wall Mounting Receptacle (back panel
mounting)
MS27513 - Box Mounting Receptacle
MS27499 - Box Mounting Receptacle (Class E)
MS27508 - Box Mounting (back panel mounting)
(Class E)
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
G - Environmental - resistant wall mount and jam
nut receptacle and plug types. Space Grade.
P - Enironment - resistant with straight potting
cup accessories
T - Environment - resistant (without rear accessory). (Class T not applicable to MS27499,
MS27513, and MS27508.)
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, 24.
CONTACT ARRANGEMENT
See pages 20 and 21.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to
+ 150ºC)
B - Olive drab cadmium over electoless nickel
plate, - 85ºF to + 347ºF (- 65ºC to
+ 175ºC)
F - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
POLARIZING POSITION
A, B, C, and D (no letter required for normal).
See page 19.
Note: To order MS connectors less standard power
contacts, purchase order must state "Less
Contacts".
ITT Nomenclature
KJ
6
T
18 N
35
S N
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
SERIES PREFIX
KJ - Series II - Low Profile
SHELL STYLE
0 - Wall mounting receptacle
2 - Box mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
5 - Box mounting receptacle (back panel
mounting)
6 - Straight plug
G6 - Straight plug, grounded
7 - Jam nut receptacle
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
F - Environment - resistant with strain relief acccessory
G - Environmental - resistant wall mount and jam
nut receptacle and plug type. Space Grade.
P - Environment - resistant with straight potting
cup accessory
R - Environment - resistant with full grommet seal
without rear accessory; shell styles 2 and 5
only
T - Environment - resistant (without rear
accessory). (Class T not applicable to KJ2E,
KJ2R, KJ5E and KJ5R.)
CONTACT ARRANGEMNT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
Note KJ supplied with exact complement of contacts.
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, and 24.
CONTACT ARRANGMENT
See pages 20 and 21.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, 85ºF to + 302ºF (- 65ºC to
+ 150ºC)
B - Olive drab cadmium over electroless nickel
plate, - 85ºF to + 347ºF (- 65ºC to + 175˚C)
N - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a finish modification code
CONTACT STYLE
P - Pin
S - Socket
POLARIZING POSITION
N(normal), A, B, C, D, see page 19.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
27- Outgassed, standard connector
A296 Black ZInc Cobalt, RoHS Compliant
T69 Olive Drab (Green) Zinc Cobalt
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
10
www.ittcannon.com
Cannon KJ
MIL-DTL-38999 Series II Connectors
Wall Mounting Receptacle
MS27472
(MS service class E, P, T)
KJ0
POLARIZING
KEYWAY
.322 (8.17) MAX.
T THREAD
J MAX.
M
A
DIA.
N
P DIA.
.069 (1.74) MAX.
BLUE BAND
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
J
Dia. Max.
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
M
Max.
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (39.08)
1.703 (43.26)
P
+.005 (0.13)
N
-.010 (0.25)
T.P
.594 (15.09) .125 (3.18)
.719 (18.26) .125 (3.18)
.812 (20.62) .125 (3.18)
.906 (23.01) .125 (3.18)
.969 (24.61) .125 (3.18)
1.062 (26.97) .125 (3.18)
1.156 (27.36) .125 (3.18)
1.250 (31.76) .125 (3.18)
1.375 (34.92) .152 (3.86)
Overall length With Backshells
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
E
Straight
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
F
Cable Clamp
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.900 (48.26)
P
Potting Max.
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
Box Mounting Receptacle
MS27499E
(MS service class E)
KJ2E
L
POLARIZING
KEYWAY
.322 (8.17)
MAX.
J MAX.
M
G
DIA.
A DIA.
N
P DIA.
BLUE BAND
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.069 (1.74) MAX.
NOTE: This connector does not accommodate backshells
Shell
Size
A
Dia. Max.
G
Dia. Max.
J
Dia. Max.
L
Max.
M
Max.
N
T.P.
8
10
12
14
16
18
20
22
24
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
11
P
+.005 (0.13)
-.010 (0.25)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
Cannon KJ
MIL-DTL-38999 Series II Connectors
Box Mounting Receptacle
MS27513E
(MS service class E)
.463
(11.76)
MAX.
KJ2R
L
.322 (8.17)
MAX.
POLARIZING
KEYWAY
J MAX.
M
G
DIA.
A DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
N
P DIA.
.069
(1.74) MAX.
NOTE: This connector does not accommodate backshells
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
G
Dia. Max.
J
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (27.67)
1.610 (40.89)
L
Max.
M
Max.
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
P
+.005 (0.13)
-.010 (0.25)
N
T.P.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.85)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
Wall Mounting Receptacle
KJ3
MS27497
(MS service class E, P, T)
.142 (3.01)
MAX. PANEL
THICKNESS (including mounting hardware)
.477 (11.35) MAX.
P DIA.
T THREAD
.322 (8.17) MAX.
POLARIZING
KEYWAY
J DIA.
A
DIA.
C
DIA.
M
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
N
.069 (1.74) MAX.
NOTE: For backshell dimensions and configurations, see pages A-30, A-32.
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (34.95)
1.501 (38.13)
C
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
J
Dia. Max.
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
M
Max.
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.26)
N
T.P
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
P
T
+.005 (0.13)
Thread
-.010 (0.25)
.125 (3.18)
7/16-28UNEF-2A
.125 (3.18)
9/16-24UNEF-2A
.125 (3.18) 11/16-24UNEF-2A
.125 (3.18) 13/16-20UNEF-2A
.125 (3.18) 15/16-20UNEF-2A
.125 (3.18) 1-1/16-18UNEF-2A
.125 (3.18) 1-3/16-18UNEF-2A
.125 (3.18) 1-5/16-18UNEF-2A
.152 (3.86) 1-7/16-18UNEF-2A
Overall Length With Backshells
E
Straight
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
.855 (21.72)
F
Cable Clamp
1.570 (39.88)
1.570 (39.88)
1.570 (39.88)
1.780 (45.21)
1.780 (45.21)
1.780 (45.21)
1.780 (45.21)
1.960 (49.78)
1.960 (49.78)
P
Potting Max.
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
12
www.ittcannon.com
Cannon KJ
MIL-DTL-38999 Series II Connectors
Box Mounting Receptacle (Back Panel)
K
MS27508E
(MS service class E)
L
KJ5E
.447 (11.35) MAX.
P DIA.
.322 (8.17) MAX.
POLARIZING
KEYWAY
J DIA.
M
G
DIA.
A
C
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
N
.069 (1.74) MAX.
K MAX. PANEL THICKNESS (including mounting hardware)
NOTE: This connector does not accommodate backshells
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
C
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
G
Dia. Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
J
Dia. Max.
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
K
Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
M
Max.
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
L
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
N
T.P
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
P
+.005 (0.13)
-.010 (0.25)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
Box Mounting Receptacle (Back Panel)
No MS part number
L
KJ5R
.447 (11.35) MAX.
P DIA.
. .322 (8.17) MAX.
POLARIZING
KEYWAY
.338
(8.58)
MAX.
J DIA.
M N
C
G
DIA.
A
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.069 (1.74) MAX.
K MAX. PANEL THICKNESS (including mounting hardware)
NOTE: This connector does not accommodate backshells
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
C
Dia. Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
G
Dia. Max.
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
J
Dia. Max.
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
13
K
Max.
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
L
Max.
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
M
Max.
N
T.P
P
+.005 (0.13)
-.010 (0.25)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
Cannon KJ
MIL-DTL-38999 Series II Connectors
Straight Plug
MS27473
(MS service class E, P, T)
KJ6
POLARIZING
KEYWAY
T THREAD
P
DIA.
G DIA.
A
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
G
Dia. Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
P
Dia. Max.
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
Overall Length With Backshells
E
F
P
Straight
Cable Clamp
Potting Max.
1.026 (26.06)
1.555 (39.50)
1.020 (25.91)
1.026 (26.06)
1.555 (39.50)
1.020 (25.91)
1.026 (26.06)
1.555 (39.50)
1.020 (25.91)
1.026 (26.06)
1.790 (45.47)
1.020 (25.91)
1.026 (26.06)
1.790 (45.47)
1.020 (25.91)
1.026 (26.06)
1.790 (45.47)
1.020 (25.91)
1.026 (26.06)
1.790 (45.47)
1.020 (25.91)
1.026 (26.06)
1.930 (49.02)
1.020 (25.91)
1.104 (28.04)
1.930 (49.02)
1.080 (27.43)
Straight Plug Grounded
MS27484
(MS service class E, P, T)
KJG6
POLARIZING
KEYWAY
T THREAD
A
P
DIA.
DIA.
G DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Overall Length With Backshells
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia. Max.
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
G
Dia. Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
P
Dia. Max.
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
T
Thread
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
E
Straight
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
F
Cable Clamp
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
P
Potting Max.
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
14
www.ittcannon.com
Cannon KJ
MIL-DTL-38999 Series II Connectors
Jam Nut Receptacle
MS27474
(MS service class E, P, T)
KJ7
R
P
.109 (2.77) MAX.
PANEL THICKNESS
T THREAD
G
POLARIZING
KEYWAY
J DIA.
C
D MOUNTING
FLAT
BLUE BAND
(INDICATES REAR
RELEASE COTACT
RETENTION SYSTEM)
V THREAD
S DIA.
.105 (2.66) MAX.
NOTE: For backshell dimensions and configurations, see pages 26 and 28.
Overall length With Backshells
Shell
C
Size Dia. Max.
D
Max.
G
Max.
J
Max.
P
Max.
R
Max. Hex.
S
Dia. Max.
T
Thread
V
Thread
E
F
P
Straight Cable Clamp Potting Max.
8
.474 (12.04)
.818 (20.78) .145 (3.68) .563 (14.30) .443 (11.25) 1.079 (27.41) 1.381 (35.08)
7/16-28UNEF-2A
7/8-20UNEF-2A
.840 (21.34)
1.555 (39.50)
1.020 (25.91)
10
.591 (15.01)
.942 (23.93) .145 (3.68) .680 (17.27) .443 (11.25) 1.205 (30.61) 1.506 (38.25)
9/16-24UNEF-2A
1-20UNEF-2A
.840 (21.34)
1.555 (39.50)
1.020 (25.91)
12
.751 (19.08) 1.066 (27.08) .145 (3.68) .859 (21.82) .443 (11.25) 1.329 (33.76) 1.631 (41.43)
11/16-24UNEF-2A 1-1/8-18UNEF-2A
.840 (21.34)
1.555 (39.50)
1.020 (25.91)
14
.876 (22.25) 1.191 (30.25) .145 (3.68) .984 (24.99) .443 (11.25) 1.455 (36.96) 1.756 (44.60)
13/16-20UNEF-2A 1-1/4-18UNEF-2A
.840 (21.34)
1.790 (45.47)
1.020 (25.91)
16
1.001 (25.43) 1.321 (33.55) .145 (3.68) 1.108 (28.14) .443 (11.25) 1.579 (40.11) 1.944 (49.38) 1-15/16-20UNEF-2A 1-3/8-18UNEF-2A
.840 (21.34)
1.790 (45.47)
1.020 (25.91)
18
1.126 (28.60) 1.441 (36.60) .145 (3.68) 1.233 (31.32) .443 (11.25) 1.705 (43.31) 2.022 (51.36)
.840 (21.34)
1.790 (45.47)
1.020 (25.91)
1-1/16-18UNEF-2A 1-1/2-18UNEF-2A
20
1.251 (31.78) 1.566 (39.78) .171 (4.34) 1.358 (34.49) .469 (11.91) 1.829 (46.46) 2.147 (54.53)
1-3/16-18UNEF-2A 1-5/8-18UNEF-2A
.840 (21.34)
1.790 (45.47)
1.020 (25.91)
22
1.376 (33.95) 1.691 (42.95) .171 (4.34) 1.483 (37.67) .469 (11.91) 2.017 (51.23) 2.271 (57.68)
1-5/16-18UNEF-2A
1-3/4-18UNS-2A
.840 (21.34)
1.930 (49.02)
1.020 (25.91)
24
1.501 (38.13) 1.816 (46.13) .171 (4.34) 1.610 (40.89) .469 (11.91) 2.142 (54.41) 2.396 (60.86)
1-7/16-18UNEF-2A
1-7/8-18UNS-2A
.860 (21.84)
1.900(48.26)
1.080 (27.43)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Panel Cutouts
Flange Mounted Receptacle
Jam Nut Receptacle
P +_ .005 (0.13)
4 HOLES
B +.000 (0.00)
-.010 (0.25)
R
(T.P.)
A
+.010 (0.25)
-.000 (0.00)
A
+.010 (0.25)
-.000 (0.00)
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia.
.610 (15.49)
.734 (18.64)
.860 (21.84)
.985 (25.02)
1.110 (28.19)
1.234 (31.34)
1.360 (35.54)
1.484 (37.69)
1.611 (40.92)
P
Dia.
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
R
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
15
Mfg.
Screw
#4
#4
#4
#4
#4
#4
#4
#4
#6
Shell
Size
8
10
12
14
16
18
20
22
24
A
Dia.
.885 (22.48)
1.010 (25.65)
1.135 (28.82)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
1.885 (47.88)
B
Dia.
.830 (21.08)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
1.835 (46.61)
Cannon KJA/KJB
MIL-DTL-38999 Series III Connectors
How To Order
Military Nomenclature
D38999
20
F
C
35
A
N
CONNECTOR TYPE
SHELL STYLE
SERVICE CLASS
(HARDWARE FINISH)
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
CONNECTOR TYPE
D38999/ - MIL-DTL-38999 Series III
CONTACT ARRANGEMENT
See pages 20, 21.
SHELL STYLE
D38999/20 - Wall mount receptacle
D38999/24 - Jam nut receptacle
D38999/26 - Straight Plug, Grounded
CONTACT STYLE
P - Pin conatcts
S - Socket contact
A - Less Pin contacts*
B - Less Socket contact*
SERVICE CLASS
(Hardware Finish)
F - Electroless nickel - 85ºF to +392ºF
(-65ºC to +200ºC)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
SHELL SIZE
A
B
C
D
E
F
G
H
J
9
11 13 15 17 19 21 23 25
Military
Designation
* Used only when other than power contacts are to
be installed (i,e., shielded, thermocouple, etc.)
POLARIZING POSITION
N (normal), A, B, C, D, E. See page 19.
Note: To order MS connectors less standard power
contacts, purchase order must state "Less Contacts”.
Cannon
Designation
KJA
Cannon Nomenclature
0
T
13
F
35
P
N
L
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SERIES PREFIX
KJA/KJB* - Series III - Scoop proof,
threaded coupling
SHELL STYLE
0 - Wall mount receptacle
6 - Straight plug
7 - Jam nut receptacle
CLASS
T - Environment-resistant (without
rear accessory)
* Consult factory for applicable layouts
SHELL SIZE
9
Cannon
11 13 15 17 19 21 23 25 Designation
A
B
C
D
E
F
G
H
J
Military
Designation
HARDWARE FINISH
F - Electroless nickel, - 85ºF to +392ºF
(-65ºC to +200ºC)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a finish modification code
CONTACT STYLE
P -Pin contacts
S -Socket contacts
POLARIZING POSITION
N (normal) A, B, C, D, E. See page 19.
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
27- Outgassed, standard connector
A296 Black Zinc Cobalt, RoHS Compliant
T69 Olive Drab (Green) Zinc Cobalt
CONTACT ARRANGEMENTS
See pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
16
www.ittcannon.com
Cannon KJA/KJB
MIL-DTL-38999 Series III Connectors
Wall Mount Receptacle
D38999/20
KJA0T
Z
Z
S
R1
W
MAX.
R2
M
B
THREAD
V THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
T
4 PLACES
.230 MAX PANEL
THICKNESS (including mounting hardware)
RED BAND
(FULLY MATED
INDICTAOR BAND)
TT 4 PLACES
Shell
Size
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
+.000 (.000)
-.005 (.130)
9
A
.6250-0.1P-0.3L-TS
.820 (20.83)
.719 (18.26)
.594 (15.09)
.938 (23.83)
.128 (3.25)
11
B
.7500-0.1P-0.3L-TS
.820 (20.83)
.812 (20.62)
.719 (18.26)
1.031 (26.19)
.128 (3.25)
13
C
.8750-0.1P-0.3L-TS
.820 (20.83)
.906 (23.01)
.812 (20.62)
1.125 (28.58)
15
D
1.0000-0.1P-0.3L-TS
.820 (20.83)
.969 (24.61)
.906 (23.01)
17
E
1.1875-0.1P-0.3L-TS
.820 (20.83)
1.062 (26.97)
19
F
1.2500-0.1P-0.3L-TS
.820 (20.83)
21
G
1.3750-0.1P-0.3L-TS
23
H
25
J
T
TT
S
+.004 (.100) +.004 (.100)
+_.012 (.300) -.002 (.050) -.002 (.050)
.520 (13.20) MAX
Metric V
Thread
(Plated)
W
Max.
Z
+.005 (.130)
-.010 (.250)
.216 (5.49)
M12X1-6g0.100R
.098 (2.50)
1.235 (31.36)
.194 (4.93)
M15X1-6g0.100R
.098 (2.50)
1.235 (31.36)
.128 (3.25)
.194 (4.93)
M18X1-6g0.100R
.098 (2.50)
1.235 (31.36)
1.219 (30.96)
.128 (3.25)
.173 (4.39)
M22X1-6g0.100R
.098 (2.50)
1.235 (31.36)
.969 (24.61)
1.312 (33.32)
.128 (3.25)
.194 (4.93)
M25X1-6g0.100R
.098 (2.50)
1.235 (31.36)
1.156 (29.36)
1.062 (26.97)
1.438 (36.53)
.128 (3.25)
.194 (4.93)
M28X1-6g0.100R
.098 (2.50)
1.235 (31.36)
.790 (20.07)
1.250 (31.75)
1.156 (29.36)
1.562 (39.67)
.128 (3.25)
.194 (4.93)
M31X1-6g0.100R
.126 (3.20)
1.235 (31.36)
1.5000-0.1P-0.3L-TS
.790 (20.07)
1.375 (34.92)
1.250 (31.75)
1.688 (42.88)
.154 (3.91)
.242 (6.15)
M34X1-6g0.100R
.126 (3.20)
1.235 (31.36)
1.6250-0.1P-0.3L-TS
.790 (20.07)
1.500 (38.10)
1.375 (34.92)
1.812 (46.02)
.154 (3.91)
.242 (6.15)
M37X1-6g0.100R
.126 (3.20)
1.235 (31.36)
R 1
R 2
Straight Plug Grounded
D38999/26
KJA6T
L
W
Q
D THREAD
B
K
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEMS
.244 (6.20)+.012 (0.30)
-.000 (0.00)
Shell
Size
MS
Shell size
Code
B
+.008 (.200)
-.000 (.000)
D Thread
Class 2B
(Plated)
9
11
13
15
17
19
21
23
25
A
B
C
D
E
F
G
H
J
.724 (18.40)
.831 (21.10)
1.000 (25.40)
1.130 (28.70)
1.268 (32.20)
1.374 (34.90)
1.500 (38.10)
1.618 (41.40)
1.744 (44.30)
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
K
Max.
.748 (19.00)
.862 (21.90)
1.027 (26.10)
1.153 (29.30)
1.291 (32.80)
1.398 (35.50)
1.524 (38.70)
1.642 (41.70)
1.768 (44.90)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
17
L
Max.
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
Q
Dia Max.
.859 (21.82)
.969 (24.61)
1.141 (28.98)
1.266 (32.16)
1.391 (35.53)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
1.875 (47.62)
V THREAD
.185 (4.70) +_ .016 (0.40)
Metric V
Thread
(Plated)
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
W
+.008 (.200)
-.004 (.100)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
Cannon KJA/KJB
MIL-DTL-38999 Series III Connectors
Jam Nut Receptacle
KJA7T
D38999/24
Z
M
S
A
P
B
THREAD
S
C
FLAT
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
V THREAD
R THREAD
.520 (13.2) MAX.
RED BAND
(FULLY MATED
INDICATOR BAND)
Shell
Size
9
9
MS
A
Shell size +.010 (.250)
Code
-.005 (.130)
M
P
Z
C
+.004 (.100) +.005 (.130) +.005 (.130) +.016 (.410)
-.010 (.250) -.040 (.100) -.004 (.100) -.004 (.100)
B Thread
Class 2A
(Plated)
S
.062 (1.57) MIN./.125 (3.18) MAX.
PANEL THICKNESS
Metric R
Thread
(Plated)
Metric V
Thread
(Plated)
A
.104 (2.64)
.6250-0.1P-0.3L-TS
.651 (16.53)
1.243 (31.57)
.871 (22.12)
.555 (14.10)
1.062 (26.97)
M17X1-6g0.100R
M12X1-6g0.100R
11
B
.104 (2.64)
.7500-0.1P-0.3L-TS
.751 (19.07)
1.243 (31.57)
.871 (22.12)
.555 (14.10)
1.250 (31.75)
M20X1-6g0.100R
M15X1-6g0.100R
13
C
.104 (2.64)
.8750-0.1P-0.3L-TS
.938 (23.82)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
1.375 (34.92)
M25X1-6g0.100R
M18X1-6g0.100R
15
D
.104 (2.64)
1.0000-0.1P-0.3L-TS
1.062 (26.97)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
1.500 (38.10)
M28X1-6g0.100R
M22X1-6g0.100R
17
E
.104 (2.64)
1.1875-0.1P-0.3L-TS
1.187 (30.15)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
1.625 (41.28)
M32X1-6g0.100R
M25X1-6g0.100R
19
F
.135 (3.43)
1.2500-0.1P-0.3L-TS
1.312 (33.32)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
1.812 (46.02)
M35X1-6g0.100R
M28X1-6g0.100R
21
G
.135 (3.43)
1.3750-0.1P-0.3L-TS
1.437 (36.50)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
1.938 (49.23)
M38X1-6g0.100R
M31X1-6g0.100R
23
H
.135 (3.43)
1.5000-0.1P-0.3L-TS
1.562 (39.67)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
2.062 (52.37)
M41X1-6g0.100R
M34X1-6g0.100R
25
J
.135 (3.43)
1.6250-0.1P-0.3L-TS
1.687 (42.85)
1.243 (31.57)
.878 (22.30)
.563 (14.30)
2.188 (55.38)
M44X1-6g0.100R
M37X1-6g0.100R
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 22, 28, and 29.
Contact Arrangements - Pages 20 and 21.
Panel Cutouts
Wall Mounted Receptacle
Jam Nut Receptacle
R1
R2
A
H
B
T
Shell
Size
9
11
13
15
17
19
21
23
25
A
+.010 (.25)
-.000 (.00)
.700 (17.78)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
B
+.000 (.00)
-.010 (.25)
.670 (17.02)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
H
+.010 (.25)
-.000 (.00)
.626 (15.90)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.188 (30.18)
1.251 (31.78)
1.376 (34.95)
1.511 (38.38)
1.626 (41.30)
R2
(TP)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
R1
(TP)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
T
(Max.)
.134 (3.40)
.134 (3.40)
.134 (3.40)
.134 (3.40)
.134 (3.40)
.134 (3.40)
.134 (3.40)
.160 (4.06)
.160 (4.06)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
18
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Polarizing Positions
Series I
Angle of Rotation (Degrees)
C
D
N
A
B
5º
REF
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polarization; the minor keys remain fixed.
Shell
Size
Normal
A
9
11
13
15
17
19
21
23
25
95º
95º
95º
95º
95º
95º
95º
95º
95º
77º
81º
75º
74º
77º
77º
77º
80º
80º
Shell Size
8
10
12
14
16
18
20
22
24
C
D
A
67º
63º
61º
65º
65º
65º
69º
69º
C
D
123º
127º
129º
125º
125º
125º
121º
121º
113º
109º
115º
116º
113º
113º
113º
110º
110º
Angle of Rotation (Degrees)
Series II
N
B
B
10º
REF
Normal
100º
100º
100º
100º
100º
100º
100º
100º
100º
A
82º
86º
80º
79º
82º
82º
82º
85º
85º
B
C
72º
68º
66º
70º
70º
70º
74º
74º
128º
132º
134º
130º
130º
130º
126º
126º
ARº
or
APº
BSC
105
102
80
35
64
91
95
113
90
53
119
51
80
135
49
66
62
79
80
135
49
66
62
79
BRº
or
BPº
BSC
140
132
118
140
155
131
141
156
145
156
146
141
142
170
169
140
145
153
142
170
169
140
145
153
D
118º
114º
120º
121º
118º
118º
118º
115º
115º
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polarization; the minor keys remain fixed.
Series III
RECEPTACLE
(Front face shown)
Shell
Size
MAIN
KEYWAY
AR˚
BSC
9
BR˚
BSC
DR˚
BSC
CR˚
BSC
11
13
and
15
PLUG
(Front face shown)
MAIN
KEY
AP˚
BSC
BP˚
BSC
DP˚
BSC
17
and
19
CP˚
BSC
NOTES
1. All Angles are BSC
2. The insert arrangement does not rotate with
main key/keyway
3. All minor keys are rotated to provide shell
polarization, the master key remains fixed at
twelve o'clock position.
4. Polarization is different from
Series I and II.
21
23
and
25
Key &
Keyway
Arrangement
identification
Letter
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
19
Key Locations
CRº
or
CPº
BSC
215
248
230
205
234
197
208
182
195
220
176
184
196
200
200
200
180
197
196
200
200
200
180
197
DRº
or
DPº
BSC
265
320
312
275
304
240
236
292
252
255
298
242
293
310
244
257
280
272
293
310
244
257
280
272
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Contact Arrangements (Engaging View Pin Insert)
Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
† Consult factory MS27505E/KJL5E insert availability
* Socket insert only
** Pin insert only (Not available in socket insert Series I and III)
Series III
Series II
Series I
No. of Contacts
Service Ratings
9-98
8-98†
9-98
3 #20
I
Series III
Series II
Series I
No. of Contacts
Service Ratings
13-98
12-98†
13-98
10 #20
I
11-5
10-5†
11-5
5 #20
I
11-4
4 #20
I
9-35
8-35†
9-35
6 #22D
M
13-35
12-35†
13-35
22 #22D
M
11-98
10-98†
11-98
6 #20
I
15-5
14-5†
15-5
5 #16
II
15-15
14-15†
15-15
14 #20,1 #16
I
15-18
14-18†
15-18
18 #20
I
13-8
12-8†
13-8
8 #20
I
12-4†
13-4**
4 #16
I
12-3
3 #16
II
11-35
10-35†
11-35
13 #22D
M
10-99†
11-99
7 #20
I
15-35
14-35†
15-35
37 #22D
M
15-19
15-19
19 #20
I
21
42
31
Series III
Series II
Series I
No. of Contacts
Service Ratings
15-97
14-97†
15-97
8 #20,4 #16
I
Series III
Series II
Series I
No. of Contacts
Service Ratings
18-28
19-28**
26 #20,2 #16
I
Series III
Series II
Series I
No. of Contacts
Service Ratings
21-11
21-11
11 #12
I
Series III
Series II
Series I
No. of Contacts
Service Ratings
21-75
21-75*•
4 #8 Twinax
M
17-6
16-6
17-6
6 #12
I
17-8
16-8†
17-8
8 #16
II
17-26
16-26†
17-26
26 #20
I
18-30
19-30**
29 #20, 1 #16
I
21-16
20-16†
21-16
16 #16
II
23-21
22-21
23-21
21 #16
II
_
16-42†
_
42 #22
M
17-35
16-35†
17-35
55 #22D
M
19-11
18-11
19-11
11 #16
II
19-32
18-32†
19-32
32 #20
I
21-35
20-35†
21-35
79 #22D
M
21-39
20-39†
21-39
37 #20,2 #16
I
22-32
23-32**
32 #20
I
16-99†
17-99**
21 #20,2 #16
I
19-35
18-35†
19-35
66 #22D
M
21-41
20-41†
21-41
41- #20
I
23-35
22-35†
23-35
100 #22D
M
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
20
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Contact Arrangements (Engaging View Pin Insert)
† Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
• Consult factory for MS27505E/KJL5E insert availability
* Socket insert only
** Pin insert only (Not available in socket insert Series I and III
Series III
Series II
Series I
No. of Contacts
Service Ratings
Series III
Series II
Series I
No. of Contacts
Service Ratings
Series III
Series II
Series I
No. of Contacts
Service Ratings
II
Series III
Series II
Series I
No. of Contacts
Service Rating
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
21
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Contacts-Pin (Series I/II/III)
KJL/KJ/KJA
MIL-C-39029/58
1st BAND (WIDE)
2nd BAND (NARROW)
3rd BAND (NARROW)
Black
Cannon
Part Number
980-0008-878
M39029
Military
Part Number
M39029/58-360
Blue
Orange
980-0008-879
M39029/58-363
Blue
Yellow
980-0008-880
M39029/58-364
Blue
Green
980-0008-881
M39029/58-365
1
Orange
Color
Bands
2
Blue
20
Orange
16
Orange
12
Orange
Contact
Size
22D
Contact
Size
3
Cable
Accomodations
Cannon
Part Number
95 Ohms
8 Coax
75 Ohms
8 Twinax
12 Coax
249-2196-000
RG-180
249-2196-001
RG-174, 179, 316
249-2196-002
RG-142
980-1000-012
M17/176-00002
980-1000-016
RG-174, 179, 316
Contacts-Socket (Series II)
MIL-C-39029/57
KJ
Manufacture identification
Code Area - Typical all contacts
Orange
Color
Bands
2
Green
20
Orange
16
Orange
12
Orange
Contact
Size
22D
1
Yellow
Cannon
Part Number
980-0008-874
M39029
Military
Part Number
M39029/57-354
Green
Violet
980-0008-875
M39029/57-357
Green
Gray
980-0008-876
M39029/57-358
Green
White
980-0008-877
M39029/57-359
3
Contacts-Socket (Series I & III)
MIL-C-39029/56
KJL/KJA
1
Color
Bands
2
Orange
Yellow
20
Orange
16
12
Contact
Size
22D
3
Cannon
Part Number
M39029
Military
Part Number
Gray
980-0008-870
M39029/56-348
Green
Brown
980-0008-871
M39029/56-351
Orange
Green
Red
980-0008-872
M39029/56-352
Orange
Green
Orange
980-0008-873
M39029/56-353
Contact
Size
8 Coax
8 Twinax
Cannon
Part Number
95 Ohms
75 Ohms
12 Coax
Cable
Accomodations
249-2195-000
RG-180
249-2195-001
RG-174, 179, 316
249-2195-002
RG-142
980-1000-013
M17/176-00002
980-1000-015
RG-174, 179, 316
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
22
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Contact Sealing Bushings
321-1035-000
Size 8 Twinax Sealing Bushing
Used with the Twinax contact in Twinax layouts for sealing cable size M17/176-00002
321-1034-001
Size 8 Coax Sealing Bushing
Used with the Coax contact in Twinax layouts for sealing cable size RG-180
Twinax Grommet
Coax Grommet
Contact Sealing Bushing Sequence into Twinax Grommet
(Bushing only used with Twinax grommet)
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
23
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Contacts-Printed Circuit Board
PIN PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
MS27466
PC CONTACT CONTACT TAIL DIA. MS27467
KJL0 / KJL6
PART NUMBER
SIZE
±.001
0.261
030-2097-002
0.020
22D
0.189
0.069
030-2097-006
22D
0.020
N/A
0.216
22D
030-2097-008
0.020
0.144
0.293
0.020
22D
030-2097-015
0.221
0.166
20
030-1997-006
0.025
0.094
0.281
20
030-1997-022
0.025
0.209
0.364
20
0.019
030-1997-030
0.292
0.278
16
0.062
030-1995-023
0.206
0.118
0.062
16
030-1995-024
0.046
MS27656
MS27505E
MS27468
KJL3 / KJL7
KJL5E
0.408
0.244
0.376
0.176
0.216
0.052
0.184
N/A
0.199
0.363
0.131
0.331
0.276
0.440
0.208
0.408
0.149
0.313
0.081
0.281
0.264
0.428*
0.196
0.396*
0.347
0.511
0.279
0.479
0.261
0.425
0.193
0.393
0.101
0.265
0.033
0.233
MS27472
MS27474
KJ0 / KJ7
MS27513E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
MS27499E
MS27508E
KJ2E / KJ5E
0.264
0.226
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
0.121
0.083
0.408
0.376
0.216
0.184
0.363
0.331
0.440
0.408
0.313
0.281
0.428*
0.396*
0.511
0.479
0.425
0.393
0.265
0.233
0.264
0.226
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
0.121
0.083
PC CONTACT
EXTENSION
MS27473
MS27484
KJ6 / KJG6
0.264
0.226
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
0.121
0.083
D38999/24
D38999/20 D38999/26 D38999/24
KJA0
KJA7 (9-17) KJA7 (19-25)
KJA6
0.262
0.266
0.280
0.258
0.200
0.194
0.216
0.198
0.074
0.070
0.088
0.066
0.002
0.008
0.024
0.006
0.235
0.217
0.221
0.213
0.171
0.155
0.149
0.153
0.298
0.290
0.294
0.312
0.226
0.230
0.232
0.248
0.163
0.171
0.185
0.167
0.103
0.099
0.121
0.105
0.282
0.286
0.300
0.278
0.220
0.214
0.236
0.218
0.365
0.369
0.383
0.361
0.303
0.297
0.319
0.301
0.279
0.283
0.297
0.275
0.217
0.211
0.233
0.215
0.119
0.123
0.137
0.115
0.057
0.051
0.073
0.055
G (SEE NOTE 5)
PC CONTACT
EXTENSION
(KJL5E, KJ0/2E/2R/3/5E/5R/6/7, & KJG6)
(KJL0/3/6/7 & KJA0/6/7)
SOCKET (SERIES II) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
PC CONTACT CONTACT
PART NUMBER
SIZE
TAIL DIA.
±.001
031-1186-006
22D
0.020
031-1186-011
22D
0.020
031-1186-013
22D
0.020
031-1186-021
22D
0.020
031-1124-021
20
0.025
031-1123-007
16
0.062
MS27472
MS27474
KJ0 / KJ7
MS27499E
MS27508E
KJ2E / KJ5E
MS27513E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
MS27473
MS27484
KJ6 / KJG6
0.179
0.141
0.109
0.071
0.217
0.179
0.262
0.224
0.247
0.209
0.101
0.063
0.323
0.291
0.253
0.221
0.361
0.329
0.406
0.374
0.391*
0.359*
0.245
0.213
0.179
0.141
0.109
0.071
0.217
0.179
0.262
0.224
0.247
0.209
0.101
0.063
0.179
0.141
0.109
0.071
0.217
0.179
0.262
0.224
0.247
0.209
0.101
0.063
SOCKET (SERIE I & III) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
PC CONTACT CONTACT TAIL DIA.
PART NUMBER
SIZE
±.001
031-1147-014
22D
0.021
031-1147-039
22D
0.020
031-1147-040
22D
0.020
031-1124-040
20
0.025
031-1123-020
16
0.029
MS27466
MS27467
KJL0 / KJL6
MS27656
MS27468
KJL3 / KJL7
MS27505E
D38999/20
D38999/26
KJL5E
KJA0
KJA6
0.244
0.172
0.168
0.096
0.438
0.366
0.486
0.414
0.272
0.200
0.227
0.159
0.151
0.083
0.421
0.353
0.469
0.401
0.255
0.187
0.391*
0.359*
0.315*
0.283*
0.585*
0.553*
0.633
0.601
0.245
0.183
0.169
0.107
0.439
0.377
0.487
0.425
0.419
0.387
0.273
0.211
0.249
0.177
0.173
0.101
0.443
0.371
0.491
0.419
0.277
0.205
D38999/24
D38999/24
KJA7 (9-17) KJA7 (19-25)
0.263
0.199
0.187
0.123
0.457
0.393
0.505
0.441
0.291
0.227
0.241
0.181
0.165
0.105
0.435
0.375
0.483
0.423
0.269
0.209
NOTES: UNLESS OTHERWISE SPECIFIED.
1. PC CONTACTS HAVE GOLD PLATING OVER SUITABLE UNDERPLATE PER MIL-C-39029 SPECIFICATION.
4. * INDICATES PC TAIL WITH STEP EXTENDING FROM REAR OF CONNECTOR.
2. PC CONTACT EXTENSIONS APPLY TO ITT CANNON CONNECTORS ONLY FOR ALL SHELL SIZES.
5. G DIM. IS .031 +/- .016 FOR KJL5E AND .120 +/- .030 (SHELL SIZES 8 THRU 22)
AND .090 +/- .050 (SHELL SIZE 24) FOR KJ0/2E/2R/3/5E/5R/6/7 & KJG6.
3. N/A INDICATES NO EXTENSION.
6. FOR OTHER SPECIFIC PC CONTACT DATA, CONSULT ITT EC, SANTA ANA, CA, USA.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
24
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Wire Sizes and Diameters
Finished wire outside dimensions
Contact
Size
22D
Wire
size (AWG)
28, 26, 24, 22
Minimum
0.030
Maximum
0.054
22M*
28, 26, 24
0.030
0.050
22*
26, 24, 22
0.034
0.060
20
24, 22, 20
0.040
0.083
16
20, 18, 16
0.065
0.109
12
14, 12
0.097
0.142
8 Coax
RG-180
0.136
0.146
8 Twinax
M17/176-00002
0.124
0.134
12 Coax
RG174, 179, 316
0.094
0.102
*For reference only
Recommended Jam Nut Torque Values
Series II
Shell
Size
8
10
12
14
16
18
20
22
24
Series I & III
Shell
Size
9
11
13
15
17
19
21
23
25
InchPounds
46/50
55/60
70/75
80/85
90/95
100/110
110/120
120/130
140/150
InchPounds
30/36
40/46
55/60
70/75
80/85
90/95
100/110
110/120
120/130
Coupling Nut Torque Values (Series I, II and III)
Maximum engagement and
disengagement
Shell
Inch
Size
Pound
8
8
8
9
12
10
12
11
16
12
16
13
20
14
20
15
24
16
24
17
28
18
28
19
32
20
32
21
36
22
36
23
36
24
40
25
Minimum
disengagement
Inch
Pound
2
2
2
2
2
2
4
3
4
3
5
3
6
5
7
5
7
5
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
25
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Backshell - Type E (Straight), Series II only
Shell Size
Series II
8
10
12
14
16
18
20
22
24
B
A
DIA.
A Dia. Max.
.580 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.32)
1.205 (30.61)
.330 (33.78)
1.455 (36.96)
1.555 (39.50)
B Dia. Max.
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.270 (6.86)
How To Order
Finishes
Shell Size
A
B
C
N
Series
II
8
10
12
14
16
18
20
22
24
Cadmium/Nickel-Clear
Part Number
057-0776-000
057-0777-000
057-0778-000
057-0779-000
057-0780-000
057-0781-000
057-0782-000
057-0783-000
057-0784-000
Cadmium/Nickel-O.D
Part Number
057-0862-000
057-0863-000
057-0864-000
057-0846-000
057-0847-000
057-0848-000
057-0849-000
057-0850-000
057-0851-000
Anodic Non-Cond.
Part Number
057-0819-000
057-0820-000
057-0821-000
057-0822-000
057-0823-000
057-0824-000
057-0825-000
057-0826-000
057-0827-000
Electroless Nickel
Part Number
057-0776-002
057-0777-002
057-0778-002
057-0779-002
057-0780-002
057-0781-002
057-0782-002
057-0783-002
057-0784-002
Backshell - Type F (Cable Clamp)
Z.
A
DIA.
N
X Y
1
X
Shell Size
Series Series
I
II
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
How To Order (MS Version)
MS27506
- A - 8 - 2
Military Designation
MS27506 Type F Straight
with Cable Clamp
Finish
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
Shell Size
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20, 22, 24
Adapter
Geometry - 2
A Max.
.508 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.43)
1.205 (30.61)
1.330 (33.78)
1.455 (36.96)
1.555 (39.50)
N Dia. Max.
.135 (3.43)
.198 (5.03)
.322 (7.18)
.385 (9.78)
.510 (12.95)
.635 (16.13)
.635 (16.13)
.760 (19.30)
.810 (20.57)
X Dia. Min.
.234 (5.94)
.297 (7.54)
.422 (10.72)
.547 (12.89)
.609 (15.47)
.734 (18.64)
.734 (18.64)
.922 (23.42)
.984 (24.99)
X 1Dia. Min.
.187 (4.75)
.187 (4.75)
.281 (7.14)
.325 (8.26)
.356 (9.04)
.456 (11.58)
.519 (13.18)
.519 (13.18)
.657 (16.69)
Shell Size
A
MS
Cannon
Series Series
I
II
Part Number Part Number Cannon
9
8
27506-*8-2
057-3005-***
-012
11
10
27506-*10-2
057-3006-***
-011
13
12
27506-*12-2
057-3007-***
-012
15
14
27506-*14-2
057-3008-***
-010
17
16
27506-*16-2
057-3009-***
-012
19
18
27506-*18-2
057-3010-***
-013
21
20
27506-*20-2
057-3011-***
-011
23
22
27506-*22-2
057-3012-***
-015
25
24
27506-*24-2
057-3013-***
-013
* MS Finish
MS
A
A
A
A
A
A
A
A
A
Y Max.
.829 (21.06)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
Finishes
B
Cannon
MS
-013
B
-012
B
-013
B
-011
B
-013
B
-014
B
-013
B
-016
B
-014
B
Z Max.
.813 (20.65)
.813 (20.65)
.813 (20.65)
.813 (20.65)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.893 (22.68)
N
Cannon
-015
-014
-015
-013
-015
-016
-015
-018
-017
F
MS
F
F
F
F
F
F
F
F
F
*** Cannon Finish
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
26
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Shell Size
Series III
9
11
13
15
17
19
21
23
25
Military Part Number
M85049/ 38-9 **
M85049/ 38-11 **
M85049/ 38-13 **
M85049/ 38-15 **
M85049/ 38-17 **
M85049/ 38-19 **
M85049/ 38-21**
M85049/ 38-23 **
M85049/ 38-25 **
M85049/
Cannon Part Number
970-6000-***
970-6000-***
970-6000-***
970-6000-***
970-6000-***
970-6000-***
970-6000-***
970-6000-***
970-6000-***
38
9
Military Designator
Type
Straight Cable Clamp
38
Shell Size Series III
9,11,13,15,17,19,21,23,25
Finish
Electroless Nickel
OD Cadmium
over electroless nickel
N
W
** Finish
*** Cannon Part No.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
Cannon
-336
-337
-338
-339
-340
-341
-342
-343
-344
27
Military
N
N
N
N
N
N
N
N
N
W
Cannon
-345
-346
-347
-348
-349
-350
-351
-352
-353
Military
W
W
W
W
W
W
W
W
W
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Backshell - Type P (Potting Boot)
Shell Size
Series I Series II
A
DIA.
B
How To Order (MS Version)
Shell Size
Series I
9
11
13
15
17
19
21
23
25
MS27486 - 10 - 1
MS Designation
Shell Size
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
1 - Straight Cup
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
8
10
12
14
16
18
20
22
24
9
11
13
15
17
19
21
23
25
Series II
8
10
12
14
16
18
20
22
24
A Dia. Max.
B Dia. Max.
.598 (15.19)
.723 (18.36)
.847 (21.51)
.969 (24.61)
1.087 (27.61)
1.211 (30.76)
1.336 (33.93)
1.461 (37.11)
1.586 (40.28)
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.141 (29.98)
1.274 (32.36)
1.399 (35.53)
MS27486
Part Number
Cannon
Part Number
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
040-0185-000
040-0169-000
040-0170-000
040-0171-000
040-0172-000
040-0173-000
040-0174-000
040-0175-000
040-0176-000
** Only even numbered shell size is applicable.
Potting Boot Adapter Ring
How To Order (MS Version)
Finishes
MS27485 - A - 8
Miltary Designation
Finish
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
Shell Size
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
Shell Size
Series Series
I
II
9
11
13
15
17
19
21
23
25
8
10
12
14
16
18
20
22
24
MS27485
Part Number
Cannon
Part Number
A
B
N
F
Cadmium/Nickel Clear Cadmium/Nickel-O.D Electroless Nickel
237-0887-***
237-0874-***
237-0875-***
237-0876-***
237-0877-***
237-0878-***
237-0879-***
237-0880-***
237-0881-***
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
Cannon
MS
Cannon
MS
Cannon
MS
-000
-000
-000
-000
-000
-000
-000
-000
-000
A
A
A
A
A
A
A
A
A
-001
-001
-001
-001
-001
-001
-001
-001
-001
B
B
B
B
B
B
B
B
B
-002
-002
-002
-002
-002
-002
-002
-003
-003
F
F
F
F
F
F
F
F
F
* MS Finish
** Only even numbered shell size is applicable
*** Cannon Finish
Wire Sealing Plugs
Series III
Size
Series I & II
Size
22D
20
16
12
22D
20
16
12
Part Number
Cannon
MS27488
225-1013-000
MS27488-22-2
225-0070-000
MS27488-20-2
225-0104-000
MS27488-16-2
225-0105-000
MS27488-12-2
Color Code
Black
Red
Green
Orange
Wire sealing plugs meet MS27488 standards. The plugs are color coded according to size for easy
identification. Wire sealing plugs may be ordered separately.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
28
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Tools - Crimp
CBT-530
M22520/1-01
M22520/2-01
Pin Contact
Series I/II/III
CBT-565
Socket Contact
Series II
Socket Contact
Series I & III
Contact
Size
Crimp Tool
Part Number
Locator or Turret
Part Number
Crimp Tool
Part Number
Locator or Turret
Part Number
Crimp Tool
Part Number
Locator or Turret
Part Number
22D or 22M*
M22520/2-01
M22520/2-09
M22520/2-01
M22520/2-06
M22520/2-01
M22520/2-07
22*
M22520/2-01
M22520/2-09
M22520/2-01
M22520/2-06
M22520/2-01
M22520/2-07
20
M22520/1-01
M22520/1-04 OR TH 187
M22520/1-01
M22520/1-04
M22520/1-01
M22520/1-04
16
M22520/1-01
M22520/1-04 OR TH 187
M22520/1-01
M22520/1-04
M22520/1-01
M22520/1-04
12
M22520/1-01
M22520/1-04
M22520/1-01
M22520/1-04
M22520/1-01
M22520/1-04
8 Coax
Inner Conductor
Crimp Tool
Crimp Tool Locator
Outer Conductor
Crimp Tool
Crimp Tool Locator
RG180
M22520/2-01
995-0002-268
RG180
M22520/5-01
M22520/5-39B
RG 174, 179, 316
M22520/2-01
995-0002-268
RG 174, 179, 316
M22520/5-01
M22520/5-37B
RG 142
M22520/2-01
995-0002-268
RG 142
M22520/5-01
M22520/5-19B
12 Coax
Inner Conductor
Crimp Tool
Crimp Tool Locator
Outer Conductor
Crimp Tool
Crimp Tool Locator
RG174, 179, 316
M22520/2-01
M22520/2-34
RG174, 179, 316
M22520/31-01
M22520/31-02
8 Twinax
Crimp Tool
Crimp Tool Locator
Center Contact
M22520/2-01
K709
Intermediate Contact M22520/5-01
Y631 Die Closure B
Outer Contact
Y631 Die Closure A
M22520/5-01
* For reference only
Tools - Plastic
Insertion/Extraction
Contact
Size
22D
Cannon
Description
CIET-22D-01
Cannon
Part Number
274-7048-000
M81969
Part Number
M81969/14-01
Superseded
Military
Part Number
MS27534-22D
Insertion
Color Tip
Green
22M*
CIET-22D-01
274-7048-000
M81969/14-01
MS27534-22D
Green
White
20
CIET-20-10
274-7001-000
M81969/14-10
MS27534-20
Red
Orange
16
CIET-16-03
274-7002-000
M81969/14-03
MS27534-16
Blue
White
12
CIET-12-04
274-7003-000
M81969/14-04
MS27534-12
Yellow
White
8 Coax/Twinax
CET8-T
323-7004-001
—
—
—
—
12 Coax
CIET-12-04
274-7003-000
M81969/14-04
M527534-12
Yellow
White
Extraction
Color Tip
White
Insertion tool not required for size 8
Tools - Metal (MS)
Insertion
Extraction
Insertion
Extraction
Contact
Size
MS27495
Part Number
ITT CANNON
Part Number
Color
Band
MS27495
Part Number
ITT CANNON
Part Number
22D OR 22M*
MS27495 A22M
995-0001-718
Black
MS27495 R22M
22*
MS27495 A22
995-0001-720
Brown
20
MS27495 A20
995-0001-716
Red
16
MS27495 A16
995-0001-732
Blue
Band No. 1 indicates tool size.
Band No. 2 indicates removal tool.
* For reference only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
29
Color Band
995-0001-719
No.1
Black
No.2
White
MS27495 R22
995-0001-721
Brown
White
MS27495 R20
995-0001-717
Red
White
MS27495 R16
995-0001-731
Blue
White
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
Assembly Instructions
Wire Stripping
Strip insulation from end of wire to be crimped.
(See table for proper stripping dimensions.) Do not
cut or damage wire strands.
Wire Size
A
A
22D or 22M*
.125 (3.18)
20
.188 (4.77)
16
.188 (4.77)
12
.188 (4.77)
* For reference only
Contact Crimping
VISUAL INSPECTION HOLE
1. Insert stripped wire into contact crimp pot.
Wire must be visible thru inspection hole.
2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert
contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The
tool will not release unless the crimp indentors in the tool head have been fully actuated.
3. Release crimped contact and wire from tool. Be
certain the wire is visible thru inspection hole in
contact.
Contact Insertion
1. Remove hardware from plug or receptacle and
slip over wire bundle in proper order for
reassembly.
2. Using proper plastic or metal insertion tool for
corresponding contact, position wire in tip of the tool
so that the tool tip butts up against the contact
3. Press tool against contact shoulder and, with
firm and even pressure, insert wired contact and
tool tip into center contact cavity. A slight click may
shoulder.
be heard as metal retaining tines snap into place
behind contact shoulder.
4. Remove tool and pull back lightly on wire to make
sure contact is properly seated. Repeat operation with
remainder of contacts to be inserted, beginning with
the center cavity and working outward in alternating
5. After all contacts are inserted, fill any empty
cavities with wire sealing plugs, Ressemble plug
or receptacle hardware.
rows.
Contact Extraction
1. Remove hardware from plug or receptacle
and slide hardware back along wire bundle.
4. Hold wire firmly in tool and extract wired
contact and tool. Repeat operation for all
2. Using plastic or metal extraction tool with proper
color code corresponding to contact size, place wire in
tool.
5. Fill any empty wire cavities with wire sealing plugs, and
3. Insert tool into contact cavity until tool tip
bottoms against the contact shoulder, expanding
clip retaining tines.
6. Reassemble plug or receptacle.
contacts to be extracted.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
30
www.ittcannon.com
Cannon KJL/KJ/KJA/KJB
MIL-DTL-38999 Series I, II, III Connectors
MIL-DTL-38999 Specifications
The following excerpts are some of the parameter requirements of the MIL-DTL-3899 Specification.
Test
Description
Contact Retention
Coupling Torque
Paragraph
Reference
4 5 19
456
Requirements
After preloading to 3 pounds maximum, the force shall be applied at a rate of approximately 1 pound per second and maintained at full load for 5-10 seconds. No damage to contacts or insert shall result nor shall the contacts be dislocated from their normal position in the connector more than 0.012 inch
under the given load. Failure to meet these requirements shall be cause for rejection.
Contact Size
22M*
22D
22*
20
18
Loads in Pounds ± 10%
10
10
10
15
25
For qualification testing, mating halves shall be coupled and uncoupled, measuring the torques necessary.The torques required to couple and uncouple
mating connector halves shall fall within the limits specifications as follows:
8/9
10/11
12
13
Max.
Min.
8
12
16
16
2
2
2
2
Shell Size
14
15
16
17
Torque
Torque
Torque
Torque
Shell Size
Max.
Min.
20
20
24
24
4
3
4
3
Shell Size
Max.
Min.
28
28
32
32
5
3
6
5
18
19
20
21
Shell Size
22
23
24
25
Max.
Min.
36
36
36
40
7
5
7
5
Durability
457
Connector halves shall be mated and unmated 250 times for Series II with ground fingers and 500 times for Series I and III at a rate not exceeding 300 cycles
per hour. The test may be performed by hand or by mechanical means, but the coupling ring shall be operated as in normal service. Failure to complete this
test because of mechanical malfunction shall be cause for rejection.
Insulation Resistance
459
An insulation resistance test shall be performed on unmated connectors in accordance with MIL-STD-202, Method 302, Test condition B. Measurement shall
be made between three pairs of adjacent contacts and the shell. Failure to meet the minimum requirement of 50,000 megohms for Classes E, P, F, R, and T
shall be cause for rejection.
Vibration
4 5 22
Wired, mated connectors shall be subjected to the vibration test of MIL-STD-202, Method 214, Test Condition II, except that the duration shall be one hour
in each plane. Receptacles shall be mounted on the vibration fixture by normal means. All contacts shall be wired in a series circuit and 100-500 millamperes
of current shall be allowed to flow through the series circuit during vibration. Suitable means shall be employed to monitor the current flow and to indicate
any discontinuity of more than 1 microsecond. The wire bundle shall be damped to the nonvibrating points at least 8 inches from the rear of the connector.
Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall be
cause for rejection.
Shock
4 5 23
Wired mated connectors shall be subjected to one shock in each direction in each of three mutually perpendicular axes. The pulse shall be approximate half
sine wave of 300g ± 15% magnitude with a duration of 3 ± 1 milliseconds. Receptacles shall be mounted on a shock fixture by normal means. All contacts
shall be wired in a series circuit and 100-150 ma. of current shall flow through the series circuit during shock. Suitable means shall be employed to monitor
the current flow and to indicate any discontinuity of more than 1 microsecond. The wire bundle shall be clamped to fixed points at feast 8 inches from the
rear of the connector, Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall be cause for rejection.
Thermal Shock
454
Unmated receptacles shall be subjected to 10 cycles of thermal shock in the following manner:
The receptacle shall be suspended for 10 + 1 - 0 minutes in the center of a cold water both with a volume of approximately one cubic foot. No
Step a
dimension of the bath shall be less than 10 inches. The water temperature shall not exceed 4ºC (39.20ºF)
The receptacle shall be suspended for 10 1 - 0 minutes in the center of a hot water bath with a volume of approximately one cubic foot. No
Step b
dimension of the bath shall be less than 10 inches. The water temperature shall be not less than 94ºC (201ºF).
The time of transfer from one bath to the other shall not exceed 5 seconds. At the end of the tenth cycle, the receptacle shall have the excess moisture shaken off and shall then be dried in a forced air oven at 66±5˚C for 15 ±1 minutes. Any evidence of damage resulting from this test shall be cause for rejection.
Altitude Immersion
458
Mated connectors shall be placed in a container of water at approximately 20ºC and placed in an altitude chamber. All wire ends shall be located within the
chamber and exposed to the chamber atmosphere, but not submerged. The exposed wire ends shall not be sealed. A quantity of salt, 5 percent by weight,
shall be added to make the water conductive. The chamber pressure shall then be reduced to approximately one inch of mercury and maintained for thirty
minutes. The chamber pressure shall then be slowly returned to atmospheric. This shall be considered one cycle. Two additional cycles shall be performed.
At the end of the last cycle, while the mated connectors are still submerged, the Insulation Resistance Test (room temperature), and the High Potential Test
(sea level voltages) shall be performed upon the same circuits. Failure to meet an insulation resistance minimum of 2,000 megohms or any evidence of dielectric breakdown or -flashover shall be cause for rejection.
Solvent Immersion
4 5 29
Unmated connectors shall be immersed fully in the applicable fluid specified below for 20 hours. After removal from the fluid, each connector shall
remain for one hour in free air at room temperature.
a.) Jet fuel JP-4 to MIL-J-5624 b.) Aircraft lubricating oil to MIL-L-9236
Corrosion
4 5 12
Unmated connectors and individual contact samples shall be subjected to the soft spray of MIL-STD-202, Method 101, Test Condition 8 (tin plated, Class Y
receptacles-24 hours). Immediately after exposure, the surfaces of the specimens shall be thoroughly washed in tap water and dried in a circulatory oven at
a temperature of 38 ±3ºC (100ºF) for a period of approximately 12 hours. Any exposure of basis metal as a result of this test, shall be cause for rejection.
Dynamic Salt Spray
4 5 12 2
(Series I and 11, finish B; Series III, class W). The wired assembled plugs and receptacles shall be mated and unmated 50 cycles at a rate of 300 cycles per
hour maximum. The mating and unmating shall be accomplished so that the plug and receptacle are completely separated during each cycle. The connectors shall then be subjected to the salt spray test in accordance with method 1001 of MIL-STD- 1344. The connectors shall be tested for 452 hours mated
followed by 48 hours unmated. After the salt spray exposure the remaining number of durability cycles specified in 4.7.7 shall be completed.
Temperature Durability 4 5 33
Wired rated connectors shall be subjected to the indicated anbient temperature for a period of 1,000 hours
+3 º
+3 º
Series I and II (finish A)
150
(302º F)
Series I and II (finish B)
175
(347º F)
-0 ºC
-0 ºC
Series III (class W)
+3 º
175
(347 º F)
-0 ºC
All other finishes
* For reference only
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
31
+3 º
200
(392º F)
-0 ºC
Product Safety and Warranty
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials.
Electrical connectors and individual components do not release or otherwise result in
exposure to hazardous chemicals under normal conditions of use and fall under the definition of “Article," under the Hazard
Communication
Standard,
29
CFR
1910.1200, and are not considered hazardous materials.
Solder and fluxes can be hazardous if
inhaled or absorbed through the skin and
should only be used as recommended by the
manufacturer. Please consult your solder and
flux manufacturer for more specific application recommendations.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of
the connector or careless use of metal tools
or conductive fluids, or transit damage to
any of the component parts may cause electric shock or burns. Live circuits must not be
broken by separating mated connectors as
this may cause arcing, ionization and burning. Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect application tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensifies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide film on contacts and wires and leakage currents
through carbonization of insulation and
tracking paths. Fire can then result in the
presence of combustible materials and this
may release noxious fumes. Overheating
may not be visually apparent. Burns may
result from touching overheated components.
3. HANDLING
Care must be taken to avoid damage
to any component parts of electrical connectors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain components to avoid injury to fingers. Always
wear safety glasses to avoid potential injury
to eyes during cleaning, soldering, fiber
preparation, etc.
Electrical connectors may be damaged in
transit to the customers, and damage may
result in creation of hazards. Products
should therefore be examined prior to installation/use and rejected if found to be damaged. Proper lifting techniques shall be used
for handling shipping cartons.
4. DISPOSAL
Please recycle, reclaim or dispose of connectors and individual components in accordance with local, state and federal laws.
Incineration of certain materials may release
noxious or even toxic fumes..
(iv) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
Commodities in this catalog may be controlled for export or re-export under the
Export Administration Regulations (EAR),
Nuclear Regulatory Commission (NRC)
Regulations, or by the International Traffic in
Arms Regulations (ITAR) when specifically
designed, modified or configured for military use.
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an electric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot be
transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before making live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the specified application
tools, cleaning materials and assembly
instructions documented in the Data
Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with
connectors. For operation voltage please see
appropriate national regulations.
ITT Corporation Interconnect Solutions
Division, (“ITT”) manufactures high quality
products. However, these products are
intended to be used in accordance with the
specifications in this publication. Any use or
application that deviates from the stated
operating specifications is not recommended and may be unsafe. No information and
data contained in this publication shall be
construed to create any liability on the part
of ITT.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safety regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
With prior written consent, reprinting this
publication without any modifications is
generally permitted.
Product Warranty
A limited product warranty applies to ITT
products.
Please
refer
to
www.ittcannon.com (General Terms and
Conditions of Sale) for the complete text of
ITT’s applicable Terms and Conditions of
Sale, including warranty.
This publication is not to be construed as an
offer. It is intended merely as an invitation
to make an offer. ITT does not assume liability for any patent infringement or violation
of other rights claimed by third parties
which may result from its use.
“ITT”, the Engineered Blocks Logo and
“Engineered for life” are registered trademarks of ITT Corporation. All other trademarks or registered trademarks are property
of their respective owners. All dates subject
to change without notice.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
(iii) Pressure
All pressure information given are differential pressure limits. The specific differential
pressure limits, across the connector interface, are documented in the Data
Safety/catalog
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
32
www.ittcannon.com
Circular/Filter/Hermetic/Fiber Optic Connectors
As a world leader in circular, filter, and hermetic connectors, ITT can
leverage its design and manufacturing expertise to fit virtually any
application. Our expertise includes fast positive mating for a wide
range of military applications, as well as numerous sizes and
contact configurations for various harsh environments. Our wide
variety of fiber optic products include hybrid contacts, multi-channel,
rack and panel, and hi-rel assemblies, including MIL and ARINC
standard solutions.ITT can meet numerous specs, including
NATO and MIL standards.
www.ittcannon.com/circulars • www.ittcannon.com/filter • www.ittcannon.com/hermetics • www.ittcannon.com/fiberoptics
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories and
are one of the most economical shielded connector solutions
available. ITT D-Sub connectors are qualified to the MIL-DTL24308 specification.
www.ittcannon.com/dsubs
Microminiature Connectors
Developed first by Cannon in the 1960’ s, Interconnect Solutions
microminiature connectors offer high performance and reliability
with exceptional versatility. Available in rectangular, circular,
and strip configurations for countless applications, many of our
connectors meet or exceed applicable requirements of the MILDTL-83513 specification.
www.ittcannon.com/micro
Rack and Panel Connectors
Initially pioneered by Cannon during the 1930s, Interconnect
Solutions is the world leader in rack and panel connectors, offering
unmatched variety of shell configurations and insert arrangements,
materials, plating, and contact options. Many of our standard and
custom designs meet the stringent requirements of ARINC 600,
ARINC 404 (MIL-C-81659), and MIL-DTL-83733 standards.
www.ittcannon.com/rackandpanel
RF Connectors
ITT Interconnect Solutions has been providing interconnect
products to the Microwave and RF industry since 1963 (formerly
The Sealectro Corporation). The RF 50 & 75 Ohm product lines
cover UHF band through Ku band requirements. These connectors
and cable assemblies are available with a thread type, snap type,
bayonet type or slide on coupling method. The frequencies range
from DC to 18+ GHz.
www.ittcannon.com/RF50 • www.ittcannon.com/RF75
Transportation
The ITT ICS interconnect range includes sealed circular and rectangular
connectors in metal or plastic shells. These configurations include board to
cable or cable to cable/ bulkhead applications. Both signal and power contacts can be combined in various layouts. All product lines within the
Transportation segment offer very low contact resistance providing maximum signal integrity.
www.ittcannon.com/transportation
ITT Interconnect Solutions is an international manufacturer and supplier of connectors including circular,
rectangular, fiber optic, RF, power and high voltage, audio, PMCIA, Compact Flash Card, enclosures,
cable assemblies, and application specific custom solutions. The Interconnect Solutions portfolio includes
the brands Cannon, VEAM, and BIW. As a worldwide leader in connector technology for nearly a century,
ITT offers one of the broadest product offerings, six sigma manufacturing capability, Value Based Product
Development with exceptional engineering capability, and an extensive sales, distribution, and customer
support network.
Global Design & Manufacturing
and Customer Support
North America
Europe & Middle East
Asia
MEXICO - Cannon, VEAM
Av. Libre Comercio s/nentre Calzada Industrial
Nuevo Nogales y Calzada del Raquet Club,
Parque Industrial Nuevo Nogales
phone: +52.631.3110050
fax:
+52.631.3110060
FRANCE - Cannon, VEAM
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax:
+33.1.60.04.93.90
CHINA - Cannon, VEAM
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town,
Baoan District, Shenzhen City,
Guangdong, China 518125
phone: +86.755.2726.7238
fax:
+86.755.2726.7515
USA - Cannon
666 East Dyer Road
Santa Ana, CA 92705
toll free: 1.800.854.3028
phone: +1.714.557.4700
fax:
+1.714.628.2142
USA - BIW
500 Tesconi Circle
Santa Rosa, CA 95401
phone: +1.707.523.2300
fax:
+1.707.523.3567
USA - VEAM
100 New Wood Road
Watertown, CT 06795
phone: +1.860.274.9681
fax:
+1.860.274.4963
GERMANY - Cannon, VEAM
Cannonstrasse 1
Weinstadt, 71384
phone: +49.7151.699.0
fax:
+49.7151.699.217
ITALY - VEAM
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax:
+39.0293872300
LEBANON - BIW
P.O. Box 199
Jounieh
Lebanon
phone: +961.9.911.560
fax:
+961.9.912.126
UK - Cannon, VEAM
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax: +44.1256.323356
HONG KONG - Cannon, VEAM
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road
Central
Hong Kong
phone: +852.2732.2720
fax:
+852.2732.2919
INDIA - Cannon, VEAM
ITT Corporation India Pvt Ltd
2nd Fl Prama House
21 Cama Industrial Estate
Walbhat Road, Goregaon (E),
Mumbai
phone: +91 22 67843000
fax:
+91 22 26783033
JAPAN - Cannon, VEAM
11-3, 5 Chome, Hibarigaoka, Zama-shi
Kanagawa, Japan 228-0003
phone: +81.462.57.2010
fax:
+81.462.57.1680
SINGAPORE - Cannon, VEAM
10 Jalan Kilang #06-01 Singapore
159410
phone: +65.62763693 ext 232
fax:
+65.62763685
www.ittcannon.com
©2011 ITT Corporation. “Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specification and other data are based on information available at the
time of printing, and are subject to change without notice.