C&K H Series Power ROTA-SLIDE Rotary Switches ® Features/Benefits • Multi-pole and multi-position • Positive detent • Power switching up to 12 AMPS • Value added capability Typical Applications • Small appliances • Industrial equipment • Elevators Models Available Specifications Materials CONTACT RATING: 12 Amps @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 45º-one contact models, 8 positions max.; two contact models, 4 positions max. OPERATING & STORAGE TEMPERATURE: -30ºC to 95ºC HOUSING & BUSHING: 6/6 nylon (UL 94V-2). ACTUATOR: 6/6 nylon (UL 94V-2). CONTACTS & TERMINALS: Copper, silver plated. CONTACT SPRING: Music wire or stainless steel. MOUNTING NUT: Steel, zinc plated. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages L-46 thru L-47. For additional options not shown in catalog, consult Customer Service Center. L Rotary Switch Function H203 DP, 45° Index, 3 pos. H101 SPST, 45° Index H202 DPDT, 45° Index H204 DP, 45° Index, 4 pos. Actuator 07 .275" high with .156" flat Mounting Style RR 3/8-40 threaded bushing Terminations 05 .110" quick connect 01 Solder lug with notch Contact Material Q Silver Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–45 www.ittcannon.com C&K H Series Power ROTA-SLIDE® Rotary Switches SWITCH FUNCTION DP MODELS 45º INDEXING SP MODELS 45º INDEXING NO. POLES MODEL NO. SWITCH FUNCTION SP H101 SPST NO. POLES TERMINALS 8-1 DP MODEL NO. SWITCH FUNCTION H202 DPDT 7-8-1, 3-4-5 H203 3 Position All Terminals H204 4 Position All Terminals TERMINALS DP MODELS 45º INDEXING SCHEMATIC SP MODELS 45º INDEXING SCHEMATIC NOTE: Break-before-make contacts. Terminal numbers are molded on bottom of housing. Actuators and contacts are shown in position 1. No common terminal is present. Switching function is provided by movable contacts shorting adjacent pairs of stationary contacts. All models with all options. Rotary L Part number shown: H10107RR05Q ACTUATOR 07 .275" HIGH WITH .156" FLAT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–46 www.ittcannon.com C&K H Series Power ROTA-SLIDE Rotary Switches ® MOUNTING STYLE RR 3/8-32 THREADED BUSHING PANEL MOUNTING Mounting nut included (part number 175000100). TERMINATIONS 05 01 SOLDER LUG WITH HOLE SOLDER LUG WITH NOTCH Not available on models with 90º indexing. CONTACT MATERIAL OPTION CODE Q RoHS COMPLIANT* YES RoHS COMPATIBLE* YES CONTACT AND TERMINAL MATERIAL SILVER 1 RATING POWER L 12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC. 1 CONTACTS & TERMINALS: Copper, silver plated. NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change L–47 www.ittcannon.com Rotary * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.