DCMAPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B FEATURES • • • • Standard SIP-7 Package I/O Isolation of 3000VDC 3.3, 5, 12, or 24VDC Input Single or Dual Outputs Available • Over Load and Short Circuit Protection • UL/cUL/IEC/EN 62368-1 (609501) Safety Approval & CE Marking DESCRIPTION The DCMAPU01H series offers 1 watt of output power in a compact 0.77” x 0.40” x 0.28” standard SIP-7 package. This series consists of both single and dual output models with either a 3.3VDC, 5VDC, 12VDC, or 24VDC input voltage. Each model in this series has an I/O isolation of 3000VDC as well as over load and short circuit protection. This series has UL/cUL/IEC/EN 62368-1 (60950-1) pending safety approvals. Please call factory for order details. Size: 0.77in x 0.40in x 0.28in (19.5mm x 10.2mm x 7.1mm) MODEL SELECTION TABLE Single Output Models Model Number DCMAPU01-033S033H DCMAPU01-033S05H DCMAPU01-033S09H DCMAPU01-033S12H DCMAPU01-033S15H DCMAPU01-05S033H DCMAPU01-05S05H DCMAPU01-05S09H DCMAPU01-05S12H DCMAPU01-05S15H DCMAPU01-12S033H DCMAPU01-12S05H DCMAPU01-12S09H DCMAPU01-12S12H DCMAPU01-12S15H DCMAPU01-24S033H DCMAPU01-24S05H DCMAPU01-24S09H DCMAPU01-24S12H DCMAPU01-24S15H Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) 24VDC (21.6~26.4) Output Voltage 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC 3.3VDC 5VDC 9VDC 12VDC 15VDC Output Current Min Load Max Load 6mA 300mA 4mA 200mA 2.2mA 110mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 2.2mA 110mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 2.2mA 110mA 1.68mA 84mA 1.34mA 67mA 6mA 300mA 4mA 200mA 2.2mA 110mA 1.68mA 84mA 1.34mA 67mA Input Current @No Load @Max Load 390mA 394mA 45mA 385mA 382mA 386mA 261mA 256mA 30mA 247mA 246mA 241mA 104mA 104mA 17mA 101mA 99mA 100mA 54mA 51mA 10mA 52mA 51mA 51mA Output Power 1W 1W 1W 1W Load Regulation (Max) 15% 12% 12% 10% 10% 12% 10% 8% 8% 8% 10% 8% 7% 7% 7% 10% 8% 8% 8% 9% Efficiency (@Max.Load) 77% 77% 78% 80% 79% 76% 78% 81% 82% 83% 79% 80% 82% 84% 83% 76% 81% 79% 82% 82% Load Regulation (Max.) 11% 9% 9% 10% 8% 9% 7% 6% 6% 8% 8% 8% Efficiency (@Max.Load) 77% 79% 79% 81% 81% 81% 81% 82% 82% 80% 81% 80% MODEL SELECTION TABLE Dual Output Models Model Number DCMAPU01-033D05H DCMAPU01-033D12H DCMAPU01-033D15H DCMAPU01-05D05H DCMAPU01-05D12H DCMAPU01-05D15H DCMAPU01-12D05H DCMAPU01-12D12H DCMAPU01-12D15H DCMAPU01-24D05H DCMAPU01-24D12H DCMAPU01-24D15H 11/17/2016 Input Voltage Range 3.3VDC (2.97~3.63) 5VDC (4.5~5.5) 12VDC (10.8~13.2) 24VDC (21.6~26.4) Output Voltage ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC Output Current Min Load Max Load ±2mA ±100mA ±0.84mA ±45mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±45mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±45mA ±0.66mA ±33mA ±2mA ±100mA ±0.84mA ±45mA ±0.66mA ±33mA Input Current @No Load @Max Load 394mA 45mA 387mA 380mA 247mA 30mA 249mA 244mA 103mA 17mA 102mA 102mA 52mA 10mA 52mA 52mA Output Power 1W 1W 1W 1W Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 5 DCMAPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, Resistive Load, and Rated Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ 2.97 4.5 10.8 21.6 -0.7 0.7 0.7 0.7 3.3 5 12 24 Max Unit INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Voltage Balance Output Power Output Current Maximum Capacitive Load 3.3V Input Models 5V Input Models 12V Input Models 24V Input Models 3.3V Input Models 5V Input Models 12V Input Models 24V Input Models All Models Dual Output, Balanced Loads Single Output Models Dual Output Models 0-20MHz Bandwidth Dimensions (L x W x H) Case Material Pin Material SAFETY CHARACTERISTICS Safety Approvals (Pending) EMI (4) EMS 11/17/2016 UL/cUL 60905-1 recognition (UL certificate), IEC/EN 60950-1 (CB-report) UL/cUL 62368-1 recognition (UL certificate), IEC/EN 62368-1 (CB report) Conduction EN55022, FCC part 15 EN55024 ESD EN61000-4-2 Air ±8kV, Contact ±6kV Radiated Immunity EN61000-4-3 10V/m Fast Transient(5) EN61000-4-4 ±2kV Surge(5) EN61000-4-5 ±1kV Conducted Immunity EN61000-4-6 10Vrms PFMF EN61000-4-8 3A/m VDC VDC See Table ±1.0 ±3.0 ±1.2 ±1.5 See Table ±0.1 ±1.0 See Table See Table 220 100 65 100 ±0.01 ±0.02 For Vin Change of 1% Ripple & Noise (20MHz bandwidth) Temperature Coefficient PROTECTION Short Circuit Protection Over Load Protection Normal Vin at 25ºC ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Natural Convection Case Temperature Storage Temperature Humidity Non-Condensing Cooling Lead Temperature 1.5mm from case for 10 sec. MTBF (calculated) MIL-HDBK-217F @25ºC, Ground Benign GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage 60 Seconds Isolation Resistance 500VDC Isolation Capacitance 100KHz, 1V PHYSICAL SPECIFICATIONS Weight 3.63 5.5 13.2 26.4 6 9 18 30 Internal Capacitor % % % µF mVp-p %/ºC Continuous, Automatic Recovery 160 % -40 -50 +90 +95 +125 +95 Natural Convection 260 3,711,000 40 3000 10 See Table 75 110 20 ºC ºC ºC %RH ºC Hours KHz VDC GΩ pF 0.11oz (3.1g) 0.77in x 0.40in x 0.28in (19.5mm x 10.2mm x 7.1mm) Non Conductive Black Plastic (Flammability to UL 94V-0 rated) Tinned Copper Class A Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] A A A A A A Page 2 of 5 Rev B DCMAPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs NOTES 1. These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules, however they may not meet all specifications listed. 2. We recommend protecting the converter by a slow blow fuse in the input supply line. 3. Other inputs and voltages may be available, please contact factory. 4. To meet EN55022 Class A, an external filter is needed. Please contact factory. 5. To meet EN61000-4-4 & EN61000-4-5 an external capacitor across the input pins is required. Suggested capacitor is 680µF/50V KY Al-E Cap. 6. “Natural Convection” is about 20LFM but is not equal to still air (0 LFM) *Due to advances in technology, specifications subject to change without notice. DERATING CURVES Power Derating Curve 11/17/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 DCMAPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs Rev B MECHANICAL DRAWINGS Standard Package Pin 1 2 5 6 7 PIN CONNECTIONS Single Output Dual Output +Vin +Vin -Vin -Vin -Vout -Vout No Pin Common +Vout +Vout All dimensions in mm (inches) Tolerance: x.x±0.5 (x.xx±0.02) x.xx±0.25 (x.xxx±0.01) Pins: ±0.05(±0.002) “A” Pinning (“A” Suffix) Pin 1 2 5 6 7 PIN CONNECTIONS Single Output Dual Output +Vin +Vin -Vin -Vin -Vout -Vout No Pin Common +Vout +Vout All dimensions in mm (inches) Tolerance: x.x±0.5 (x.xx±0.02) x.xx±0.25 (x.xxx±0.01) Pin Diameter Ø1.0±0.05(0.04±0.002) 11/17/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 Rev B DCMAPU01H SERIES 1 Watt DC/DC Converter Single and Dual Outputs COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 11/17/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5