Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Compact Low Current 3-phase WYE RFI Filters AYO Series UL Recognized CSA Certified VDE Approved AYO Series 2 Specifications • For 3-phase, four wire, WYE applications • Good for attenuation beginning at 100kHz • Space saving design Maximum leakage current each Line to Ground: @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): Line to Ground: Line to Line: • Low leakage current • Easy to connect terminals Ordering Information Input / Output Style 1 – 0.25 [6.3] spade terminals AYO Series 20A 2.0 mA 3.0 mA 3.5 mA 5.5 mA 1500 VAC 1450 VDC Rated Voltage (max): Phase to Phase: Phase to Neutral / Ground: 440 VAC 250 VAC Operating Frequency: 50/60 Hz Rated Current: 10 AYO 1 3, 6, 10A Three Phase Filters • Filters each of the three lines plus neutral 3 to 20A Operating Ambient Temperature Range (at rated current Ir): -10°C to +40°C In an ambient temperature (Ta) higher than +40°C the maximum operating current (Io) is calculated as follows: Io = Ir (85-Ta)/45 Electrical Schematic Current Rating 3, 6, 10 or 20A LINE LOAD Available Part Numbers 3AYO1 10AYO1 6AYO1 20AYO1 N N 111 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com Catalog: 1654001 Issue Date: 06.2011 Corcom Product Guide Compact Low Current 3-phase WYE RFI Filters (continued) AYO Series Case Style Case Dimensions A D Part No. AYO Series B A B C D E C E Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 3AYO1 6AYO1 10AY01 20AYO1 db 100 db 100 db 100 db 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 0 0.1 1 0 10 30 Frequency in MHz 0.1 1 10 30 Frequency in MHz 0 10 0.1 1 0 10 30 Frequency in MHz 0.1 1 10 30 Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 112 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. For email, phone or live chat, please go to te.com/help corcom.com