Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : TP Type : A Features ● Endurance : 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h ● Smaller than series TA ● High ripple current (at high frequency) : 20 to 40% higher than TA series ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance 1 Endurance 2 Shelf Life 1 Shelf Life 2 AEC-Q200 –40 °C to + 135 °C 25 V .DC to 35 V .DC 100 µF to 5100 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes V.DC tan d 25 35 (120Hz / +20 °C) 0.14 0.12 For capacitance value > 1000 µF , add 0.02 per every 1000 µF. After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Duration 08 : 1000 hours, 010 to 018 : 2000 hours Capacitance change Within ±30 % of the initial value tan d < 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) AEC-Q200 compliant Frequency correction factor for ripple current Rated voltage (V.DC) 25 to 35 Capacitance (µF) to 330 390 to 1000 1200 to 60 0.55 0.70 0.75 120 0.65 0.75 0.80 Frequency (Hz) 1k 0.85 0.90 0.90 10 k 0.90 0.95 0.95 100 k 1.00 1.00 1.00 fd±0.05 Dimensions Sleeve 010 < 08 + Pressure relief L✽ ✽ L < 16 : L±1.5 L > 20 : L±2.0 0D 0d F 8 0.6 3.5 14 min. 3 min. 0D±0.5 F±0.5 – 0D±0.5 (Unit : mm) 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D 25 35 220 10 330 10 8 470 10 510 10 820 10 1000 12.5 1200 12.5 12.5 1800 16 2000 16 16 2200 18 16 2700 18 16 3300 18 16 3900 18 4700 18 5100 18 100 10 120 10 8 220 10 8 270 10 330 10 390 10 470 12.5 560 12.5 620 12.5 820 12.5 1000 16 1200 16 16 1500 18 1600 16 16 1800 18 16 2000 18 2200 18 2700 18 L 12.5 16 20 16 16 20 20 20 25 20 20 25 20 25 20 31.5 25 31.5 25 31.5 31.5 12.5 12.5 20 16 20 16 20 20 20 20 20 25 20 20 25 20 25 31.5 25 31.5 25 31.5 31.5 Specification Ripple Ripple current current (100 kHz) (100 kHz) (+125 °C) (+135 °C) (mA r.m.s.) (mA r.m.s.) 580 500 1100 945 1060 760 1100 945 1100 945 1540 1100 1860 1490 1860 1490 2180 1750 2380 1985 2380 1985 2760 2300 2700 2250 2760 2300 2700 2250 3250 2710 2960 2470 3250 2710 2960 2470 3480 2900 3480 2900 580 500 580 500 1060 760 1100 945 1060 760 1100 945 1540 1100 1540 1100 1860 1490 1860 1490 1860 1490 2180 1750 2380 1985 2380 1985 2760 2300 2700 2250 2760 2300 3250 2710 2960 2470 3250 2710 2960 2470 3480 2900 3480 2900 Lead length (mm) Min. Packaging Q'ty Lead space ESR Straight tan d 125 °C 135 °C Lead Part No. (100 kHz) Taping Taping leads (120 Hz) Enduance Enduance dia. (pcs) (+20 °C) Straight (+20 °C) (hours) (hours) 0d (pcs) ✽B ✽ : Substandard (Ω) (E24series numbers) 0.190 0.130 0.067 0.130 0.130 0.052 0.038 0.038 0.030 0.029 0.029 0.022 0.028 0.022 0.028 0.018 0.020 0.018 0.020 0.016 0.016 0.190 0.190 0.067 0.130 0.067 0.130 0.052 0.052 0.038 0.038 0.038 0.030 0.029 0.029 0.022 0.028 0.022 0.018 0.020 0.018 0.020 0.016 0.016 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.18 0.20 0.22 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 3000 3000 2000 3000 3000 3000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 2000 3000 2000 3000 3000 3000 4000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 2000 2000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 2000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 EEUTP1E221( ) EEUTP1E331( ) EEUTP1E471L( ) EEUTP1E471( ) EEUTP1E511( )✽ EEUTP1E821( ) EEUTP1E102( ) EEUTP1E122( ) EEUTP1E182( ) EEUTP1E182S( ) EEUTP1E202S( )✽ EEUTP1E222( ) EEUTP1E222S( ) EEUTP1E272( ) EEUTP1E272S( ) EEUTP1E332 EEUTP1E332S( ) EEUTP1E392 EEUTP1E392S( ) EEUTP1E472 EEUTP1E512✽ EEUTP1V101( ) EEUTP1V121( ) EEUTP1V221L( ) EEUTP1V221( ) EEUTP1V271L( ) EEUTP1V271( ) EEUTP1V331( ) EEUTP1V391( ) EEUTP1V471( ) EEUTP1V561( ) EEUTP1V621( )✽ EEUTP1V821( ) EEUTP1V102( ) EEUTP1V122( ) EEUTP1V152( ) EEUTP1V152S( ) EEUTP1V162( )✽ EEUTP1V182 EEUTP1V182S( ) EEUTP1V202✽ EEUTP1V202S( )✽ EEUTP1V222 EEUTP1V272 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 50 50 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 50 50 500 500 1000 500 500 500 500 500 500 250 250 250 250 250 250 250 250 500 500 1000 500 1000 500 500 500 500 500 500 500 250 250 250 250 250 250 250 · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016