Click on Series name for product info on aimtec.com Series AM15CW-FZ 15Watt | DC-DC Converter FEATURES: Ultra Compact Footprint 1”x1” Ultra-Wide Input Range 4:1 1500 VDC Isolation Remote ON / OFF Function Output Short Circuit Protection Operating Temperature -40ºC to +85ºC Over Voltage, Over Load Protection Efficiency up to 89% Models Single output Model Input Voltage (V) Output Voltage (V) Output Current Max (A) Isolation (VDC) 9-36 9-36 9-36 9-36 18-75 18-75 18-75 18-75 3.3 5 12 15 3.3 5 12 15 4 3 1.3 1 4 3 1.3 1 1500 1500 1500 1500 1500 1500 1500 1500 Input Voltage (V) Output Voltage (V) Output Current Max (A) Isolation (VDC) AM15CW-2403S-FZ AM15CW-2405S-FZ AM15CW-2412S-FZ AM15CW-2415S-FZ AM15CW-4803S-FZ AM15CW-4805S-FZ AM15CW-4812S-FZ AM15CW-4815S-FZ Input Current Full | No Load (mA) 671 744 783 753 335 368 382 368 59 53 56 59 27 24 28 29 Max Capacitive Load (uF) Efficiency (%) 12000 6000 2000 1200 12000 6000 2000 1200 86 88 87 87 86 89 89 89 Max Capacitive Load (uF) Efficiency (%) Models Dual output Model Input Current Full | No Load (mA) AM15CW-2405D-FZ 9-36 ±5 ±1.5 1500 772 49 ±3000 85 AM15CW-2412D-FZ 9-36 ±12 ±0.625 1500 753 58 ±1000 87 AM15CW-2415D-FZ 9-36 ±15 ±0.5 1500 753 60 ±600 87 AM15CW-4805D-FZ 18-75 ±5 ±1.5 1500 386 23 ±3000 85 AM15CW-4812D-FZ 18-75 ±12 ±0.625 1500 372 28 ±1000 88 AM15CW-4815D-FZ 18-75 ±15 ±0.5 1500 368 30 ±600 89 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Filter Start up time Nominal Typical 24 48 9-36 18-75 Maximum Units VDC 72 ms π Absolute Maximum Rating Peak Input Voltage time On/Off control Under voltage lockout Input reflected ripple current Nominal Vin with constant resistive load 24 Vin 48 Vin 50 100 100 ON 3.5 to 12VDC (or open) ; OFF 0 to 0.7 VDC or short to Vin pin 2 On source current <0.2mA, OFF idle current – <12mA 24 Vin ON/OFF 8.5 /7 48Vin ON/OFF 17/15 60 VDC ms VDC mA p-p Isolation Specifications Parameters Conditions Tested I/O voltage Resistance Capacitance 3 sec www.aimtec.com Tel: +1 514 620 2722 F 051e R11 Typical >1000 550 1 of 3 Rated Units 1500 VDC MOhm pF Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-FZ 15Watt | DC-DC Converter Output Specifications Parameters Voltage accuracy Over voltage protection Over load protection Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Voltage adjustment range Transient recovery time Transient recovery deviation Conditions Typical Zener Diode Clamp % of Full Load at Nominal Input HL-LL 25% to 100% load balanced load Unbalanced 25% to 100% 20MHz Bandwidth Trim - Single output models only Load step change 50% di/dt = 0.8A/µsec 3.3V models Maximum ±1 120 110 Continuous Auto-Recovery ±1.0 ±1.0 ±0.5 ±5.0 ±0.02 80 10 560 ±5 ±6 Units % % % % % % %/oC mV p-p % µS %of Vo General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Potting Material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Conditions Typical 100% load With derating above +63°C -55 to +125 Maximum 330 -40 to +85 105 Units KHz oC oC oC Free air convection 95 Nickel-coated copper Silicon Rubber (UL94V-0) 19.2 1.00 x 1.00 x 0.40 inches 25.40 x 25.40 x 10.20 mm > 1,580,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5mm from case for 10 sec 260 % RH g oC Pin Out Specifications Pin 1 2 3 4 5 6 Single + V input - V input On/Off Control + V output Trim - V output www.aimtec.com F 051e R11 Dual + V input - V input On/Off Control + V output Common - V output Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM15CW-FZ 15Watt | DC-DC Converter Dimensions Bottom View 2.54 (0.10) Top View 25.40 (1.00) 10.16 2.54 (0.40) (0.10) 10.16 (0.40) 5 4 6 20.32 (0.80) 25.40 (1.00) +V Output Trim -V Output +V -V Input Input CTRL 2.54 (0.10) 1 Side View 10.16 (0.40) 2 3 5.08 7.62 (0.20) (0.30) 2.54 (0.10) 5.08 (0.2) 10.20 (0.4) Printed Face 1.00 (0.39) Derating Trimming NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11 Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only