DCMPPW03 SERIES 3 Watt Medical DC/DC Power Converters Rev C FEATURES Size: 1.25 x 0.80 x 0.40 inches (31.8 x 20.3 x 10.2 mm) • 2µA Patient Leakage Current • Reinforced Insulation for 250VAC Working Voltage • Single & Dual Outputs • Clearance and Creepage Distance: 8.0mm/2MOPP • Under Voltage Protection • 5000VAC Input to Output 2MOPP Isolation • High Efficiency up to 87% • Short Circuit, Over Voltage, and Over Load Protection • 4:1 Wide Input Voltage Ranges • CE Marked • Built-in EMI Class A Filter • Compliant to RoHS II & REACH • Low Stand-by Power • ANSI/AAMI ES60601-1, EN60601-1, IEC60601-1 3rd Edition, Consumption UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals • 3 Watts Output Power Applications: • Medical Equipment • Telecom/Datacom • Industry Control Systems • Measurement Equipment • Semiconductor Equipment • PV Power Systems • IGBT Gate Drivers • Optional Remote ON/OFF Control and Trim Pin DESCRIPTION The DCMPPW03 series of medical DC/DC power converters provides 3 Watts of output power in a 1.25” x 0.80” x 0.40” DIP package. This series consists of single and dual output models with 4:1 wide input voltage ranges of 9-36VDC and 18-75VDC. Some features include high efficiency up to 87%, 5000VAC I/O (2 MOPP) isolation, and low stand-by power consumption. These converters are also protected against under voltage, short circuit, over voltage, and over load conditions. All models are RoHS compliant and have ANSI/AAMI ES60601-1, EN60601-1, IEC60601-1 3rd Edition, UL60950-1, EN60950-1, and IEC60950-1 safety approvals. Remote ON/OFF and Trim functions are also available for this series. MODEL SELECTION TABLE SINGLE OUTPUT MODELS Output Voltage Output Current Output Power Efficiency Maximum Capacitive Load 3.3 VDC 1000mA 30mVp-p 6mA 3.3W 82% 1050µF 5 VDC 600mA 30mVp-p 6mA 3W 84.5% 750µF 12 VDC 250mA 40mVp-p 6mA 3W 87% 130µF DCMPPW03-24S15x 15 VDC 200mA 40mVp-p 6mA 3W 87% 100µF DCMPPW03-24S24x 24 VDC 125mA 50mVp-p 6mA 3W 87% 39µF DCMPPW03-48S33x 3.3 VDC 1000mA 30mVp-p 4mA 3.3W 81% 1050µF 5 VDC 600mA 30mVp-p 4mA 3W 84% 750µF 12 VDC 250mA 40mVp-p 4mA 3W 87% 130µF DCMPPW03-48S15x 15 VDC 200mA 40mVp-p 4mA 3W 86.5% 100µF DCMPPW03-48S24x 24 VDC 125mA 50mVp-p 4mA 3W 86.5% 39µF Output Power Efficiency Maximum Capacitive Load Model Number (1) Input Voltage DCMPPW03-24S33x DCMPPW03-24S05x DCMPPW03-24S12x 24VDC (9 - 36 VDC) DCMPPW03-48S05x DCMPPW03-48S12x 48 VDC (18 - 75 VDC) Output No Load Ripple & Noise Input Current DUAL OUTPUT MODELS Model Number (1) Input Voltage DCMPPW03-24D05x DCMPPW03-24D12x 24 VDC (9 - 36 VDC) DCMPPW03-24D15x DCMPPW03-48D05x DCMPPW03-48D12x DCMPPW03-48D15x 2/03/2016 48 VDC (18 - 75 VDC) Output Voltage Output Current Output No Load Ripple & Noise Input Current ±5 VDC ±300mA 30mVp-p 6mA 3W 83% ±430µF ±12 VDC ±125mA 40mVp-p 6mA 3W 87% ±75µF ±15 VDC ±100mA 40mVp-p 6mA 3W 86% ±56µF ±5 VDC ±300mA 30mVp-p 4mA 3W 83% ±430µF ±12 VDC ±125mA 40mVp-p 4mA 3W 86% ±75µF ±15 VDC ±100mA 40mVp-p 4mA 3W 86% ±56µF Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 5 Rev C DCMPPW03 SERIES 3 Watt Medical DC/DC Power Converters TECHNICAL SPECIFICATIONS: DCMPPW03 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 9 18 24 48 36 75 9 18 Unit INPUT SPECIFICATIONS Input Voltage Range Start-Up Voltage Shutdown Voltage Input Surge Voltage (3sec, max.) Input Current Input Filter Remote ON/OFF Control 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models 24VDC nominal input models 48VDC nominal input models No Load (Only for “B” type pin connection models) Referenced to –INPUT pin Input Current of CTRL Pin Remote OFF Input Current Nominal Vin Nominal Vin VDC VDC 8 16 VDC DC/DC ON 50 100 See Table Pi type Open or 0 ~ 1.2VDC DC/DC OFF 2.2 ~ 12 VDC -0.5 1 2.5 VDC mA mA OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Low line to high line at full load Load Regulation No load to full load Cross Regulation Voltage Adjustability Asymmetrical load 25%/100% FL Single Output Models (Only for “B” type pin connection models) Dual Output Models Single Output Models Dual Output Models Single Output Models Dual Output Models Dual Output Models 3.3V, 5V, 12V Output Models 15V, 24V Output Models ±5V, ±12V, ±15V Output Models -1.0 -0.2 -0.5 -0.2 -1.0 -5.0 -10 -10 -10 Output Power Output Current Maximum Capacitive Load Minimum input and constant resistive load Measured with a 10µF/25V X7R MLCC 3.3V, 5V Output Models Ripple & Noise (20MHz BW) Measured with a 10µF/25V X7R MLCC 12V, 15V Output Models Measured with a 4.7µF/50V X7R MLCC 24V Output Models Transient Response 25% load step change Recovery Time Power Up Start-Up Time Constant resistive load Remote On/Off Temperature Coefficient See Table +1.0 +0.2 +0.5 +0.2 +1.0 +5.0 +10 +20 +10 See Table See Table See Table 30 40 50 250 % % % % % mVp-p µs 30 30 -0.02 % ms +0.02 %/°C PROTECTION Short Circuit Protection Over Load Protection Single Output Models Over Voltage Protection 3.3V Output Models 5V Output Models 12V Output Models 15V Outputs Models 24V Output Models 5V Output Models 12V Output Models 15V Outputs Models Continuous, automatic recovery 150 % 3.7 5 5.6 7.0 13.5 16 18.3 22.0 VDC 29.1 34.5 5.6 7.0 13.5 18.2 17.0 22.0 Input to Output 135 5000 % of rated Iout; hiccup mode Continuous clamp Dual Output Models GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage Isolation Capacitance Leakage Current Clearance/Creepage 2/03/2016 Nominal input voltage and full load 1 minute See Table 150 165 12 240VAC, 60Hz 8 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] 17 2 kHz VAC pF µA mm Page 2 of 5 Rev C DCMPPW03 SERIES 3 Watt Medical DC/DC Power Converters TECHNICAL SPECIFICATIONS: DCMPPW03 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Without derating -40 +94 With derating +94 +105 -55 +125 °C 95 % RH Storage Temperature Range Thermal Impedance Natural convection (20LFM) °C 18 Relative Humidity 5 Thermal Shock °C/W MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217 Full Load 6,444,000 hours PHYSICAL SPECIFICATIONS Weight Case Material 0.48oz (14g) 1.25x0.80x0.40 inches (31.8x20.3x10.2mm) Non-conductive black plastic Base Material Non-conductive black plastic Dimensions (L x W x H) Potting Material Silicon (UL94-V0) SAFETY & EMC CHARACTERISTICS Safety Approvals (pending) EMI (See Note 2) ESD Radiated Immunity Fast Transient (See Note 3) Surge (See Note 3) Conducted Immunity Power Frequency Magnetic Field ANSI/AAMI ES60601-1, IEC60601-1, EN60601-1, UL60950-1, EN60950-1, IEC60950-1 EN55011, EN55022, and FCC Part 18 Air ±8kV EN61000-4-2 Contact ±6kV EN61000-4-3 10 V/m EN61000-4-4 ±2kV EN61000-4-5 ±2kV EN61000-4-6 10 Vrms EN61000-4-8 100A/m continuous; 1000A/m 1 second Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A NOTES 1. The “x” in the model number represents the Pin Connection type. It can be “A” for pin connection type A or “B” for pin connection type B. See mechanical drawings on page 4 for more information. 2. The DCMPPW03 series meets EMI Class A without an external filter added. This series can only meet EMI Class B with external components added. Please contact factory for more information. 3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. • For 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470µF/50V) in parallel. • For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330µF/100V) in parallel. 4. Remote ON/OFF control is optional and is only available for “B” type pin connection models. To order the converter with remote ON/OFF add the suffix “-P” to the model number (Ex: DCMPPW03-48S12B-P). 5. Trim function is optional and is only available for “B” type pin connection models. To order the converter with Trim pin add the suffix “-T” to the model number (Ex: DCMPPW03-48S12B-T). CAUTION: This power module is not internally fused. An input line fuse must always be used. *Due to advances in technology, specifications subject to change without notice. 2/03/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 DCMPPW03 SERIES 3 Watt Medical DC/DC Power Converters Rev C CHARACTERISTIC CURVES DCMPPW03-48S05A Derating Curve DCMPPW03-48S05A Efficiency vs Input Voltage DCMPPW03-48S05A Efficiency vs Output Load MECHANICAL DRAWINGS A Type Pin Connection (Suffix “A”) PIN PIN CONNECTIONS SINGLE DUAL 1 11 12 13 15 23 24 +INPUT NO PIN -OUTPUT +OUTPUT NO PIN -INPUT -INPUT +INPUT COMMON NO PIN -OUTPUT +OUTPUT -INPUT -INPUT 1. Dimensions in inch (mm) 2. Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin Pitch Tolerance: ±0.01 (0.25) Pin Dimension Tolerance: ±0.004 (0.1) B Type Pin Connection (Suffix “B”) PIN CONNECTIONS PIN 1 2 10 11 14 16 22 23 SINGLE CTRL (Optional) -INPUT TRIM (Optional) **NO PIN/NC +OUTPUT -OUTPUT +INPUT +INPUT DUAL CTRL (Optional) -INPUT TRIM (Optional) -OUTPUT +OUTPUT COMMON +INPUT +INPUT **For single output models, Pin 11 is “NO PIN” with the trim pin option (Suffix “-T”) and “NC” without the trim pin option. 1. Dimensions in inch (mm) 2. Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) 3. Pin Pitch Tolerance: ±0.01 (0.25) 4. Pin Dimension Tolerance: ±0.004 (0.1) EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. ( ) for dual output trim 2/03/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 DCMPPW03 SERIES 3 Watt Medical DC/DC Power Converters Rev C MODEL NUMBER SET DCMPPW Series Name 03 - Output Power 03: 3 Watts 48 S 05 B Input Voltage Output Quantity Output Voltage Pin Connection 24: 24 VDC S: Single Output 33: 3.3 VDC A: A Type 48: 48 VDC 05: 5 VDC B: B Type P (1) T (1) Remote ON/OFF Option Trim Option - No Remote ON/OFF P: Remote ON/OFF None: None No Trim : T: Trim 12: 12 VDC 15: 15 VDC 24: 24 VDC D: Dual Output 05: ±5 VDC 12: ±12 VDC 15: ±15 VDC (1) Remote ON/OFF Control and Trim options are only available for “B” type pin connection models. COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 2/03/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5