UTC MGBR10L45L-TN3-R Mos gated barrier rectifier Datasheet

UNISONIC TECHNOLOGIES CO.,LTD
MGBR10L45
Preliminary
DIODE
MOS GATED BARRIER
RECTIFIER

DESCRIPTION
The UTC MGBR10L45is a surface mount mos gatedbarrier
rectifier,it uses UTC’s advanced technology to provide customers
withlow forward voltage drop and high switching speed, etc.

FEATURES
* Low forward voltage drop
* High switching speed

SYMBOL
TO-220-2

TO-252/TO-277
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
MGBR10L45L-TA2-T
MGBR10L45G-TA2-T
MGBR10L45L-TN3-R
MGBR10L45G-TN3-R
MGBR10L45L-T27-R
MGBR10L45G-T27-R
Note: Pin Assignment: A: Anode
K: Cathode
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
Package
TO-220-2
TO-252
TO-277
Pin Assignment
1
2
3
K
A
A
K
A
A
K
A
Packing
Tube
Tape Reel
Tape Reel
1 of 4
QW-R601-113.c
MGBR10L45

Preliminary
DIODE
MARKING
PACKAGE
MARKING
TO-220-2
TO-277
TO-252
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R601-113.c
MGBR10L45

Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS(TA=25ºC, unless otherwise specified)
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load,derate current by 20%.
PARAMETER
SYMBOL
RATINGS
UNIT
DC Blocking Voltage
VRM
45
V
WorkingPeak Reverse Voltage
VRWM
45
V
Peak Repetitive Reverse Voltage
VRRM
45
V
RMS Reverse Voltage
VR(RMS)
32
V
Average Rectified Output Current
TC=140°C
IO
10
A
Non-Repetitive Peak Forward Surge Current 8.3ms
IFSM
90
A
Single Half Sine-Wave Superimposed on Rated Load
Repetitive Peak Avalanche Power (1μs, 25°C)
PARM
5000
W
Operating Junction Temperature
TJ
-65~+150
°C
Storage Temperature
TSTG
-65~+150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.

THERMAL CHARACTERISTICS
PARAMETER
Junction to Ambient
Junction to Case

SYMBOL
TO-220-2
TO-252
TO-277
TO-220-2
TO-252
TO-277
θJA
θJC
RATINGS
60
110
73 (Note 3)
2
2.5
13 (Note 3)
UNIT
°C/W
°C/W
ELECTRICAL CHARACTERISTICS(TA=25°C,unless otherwise specified.)
PARAMETER
Reverse Breakdown Voltage (Note 1)
SYMBOL
V(BR)R
TEST CONDITIONS
IR=0.5mA
IF=10A, TJ=25°C
Forward Voltage Drop
VFM
IF=10A, TJ=125°C
VR=45V, TJ=25°C
Leakage Current (Note 1)
IRM
VR=45V, TJ=125°C
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Thermal resistance junction to case mounted on heatsink.
3. Mounted on an FR4 PCB, single-sided copper, with 100cm2 copper pad area.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
MIN
45
TYP MAX UNIT
V
0.58
V
0.53
V
50
300 μA
12
40
mA
3 of 4
QW-R601-113.c
MGBR10L45
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R601-113.c
Similar pages