ACT ACTF4042/410/DCC6 Rf filter Datasheet

Tel :
Fax :
+44 118 979 1238
+44 118 979 1283
Email: [email protected]
The ACTF4042/410/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW)
RF filter in a surface-mount ceramic DCC6 case for FRS & PMR applications.
1. Package Dimension (DCC6)
Sign
2. Marking
Laser Marking
Pin
Configuration
2
Input
5
Output
1, 3, 4, 6
Ground
Data (unit: mm)
Sign
Data (unit: mm)
A
1.90±0.1
E
1.35±0.15
B
0.64±0.1 (x6)
F
3.80±0.15
C
1.00±0.1 (x5)
G
3.80±0.15
D
1.27±0.1 (x4)
3. Matching Circuit
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Tel :
Fax :
+44 118 979 1238
+44 118 979 1283
Email: [email protected]
4. Typical Frequency Response
5. Performance
5-1. Maximum Ratings
Rating
Input Power Level
DC Voltage
Value
Unit
P
+13
dBm
VDC
10
V
Operable Temperature Range
TA
-40 to +85
°C
Storage Temperature Range
Tstg
-40 to +85
°C
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Tel :
Fax :
+44 118 979 1238
+44 118 979 1283
Email: [email protected]
5-2. Electronic Characteristics
Characteristic
Minimum
Typical
Maximum
Unit
Center Frequency
fC
--
410.000
--
MHz
User Signal Band
BW
--
±2.0
--
MHz
--
2.5
4.5
dB
45
45
50
50
---
dB
--
0.8
1.5
dB
Insertion Loss
IL
fC ± 2.0 MHz
Absolute Attenuation
fC-200.0MHz to fC- 40.8MHz
fC+40.8MHz to fC+200.0MHz
Ripple
α
∆α
fC ± 2.0 MHz
Input / Output Impedance (Nominal)
50Ω // 0pF
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
NOTE:
1.
2.
3.
4.
5.
6.
The frequency fC is defined as the midpoint between the 3dB frequencies.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is
connected to a 50Ω test system with VSWR≤1.2:1.
Unless noted otherwise, specifications apply over the entire specified operating temperature range.
The specifications of this device are based on the test circuit shown above and subject to change or
obsolescence without notice.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to
manufacture or sale.
Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Similar pages