Datasheet Version1.1 High Voltage AC LED Driver General Description Features The MAP900X family is a LED Driver which has high input voltage ranged from 90V to 270V. It can drive several series LEDs from rectified AC voltage. The MAP900X family can achieve 0.95 or higher power factor and low total harmonic distortion less than 20%. The MAP900X family has higher LED current drive capability up to 240mA and the current can be adjustable with external resistors. Flicker-free (MAP9001) EMI improvement Input power variation: ±10% Higher power factor : > 0.95 Lower total harmonic distortion : < 20% Higher current drive capability Up to 240mA eSOP-16, eSOP-8, SOP-8 The MAP900X family is available in eSOP-16, eSOP-8, SOP-8 with Halogen-free (fully RoHS compliant). For more information, please contact local MagnaChip sales office in world-wide or visit MagnaChip’s website. Applications AC LED Driver Lighting equipment LED Driver Power Supplies Ordering Information AUG. 2015 Part Number Top Marking Ambient Temperature Range Package RoHS Status MAP9001ESRH MAP9001 -30℃ to +85℃ eSOP-16 Halogen Free MAP9002ESRH MAP9002 -30℃ to +85℃ eSOP-8 Halogen Free MAP9003SIRH MAP9003 -30℃ to +85℃ SOP-8 Halogen Free High Voltage AC LED Driver MAP9001, MAP9002, MAP9003 Datasheet Version1.1 High Voltage AC LED Driver Simplified Application Circuit MAP9001 16 2 15 3 14 MAP9001 1 4 5 - 12 6 11 7 10 8 9 MAP9001 with flicker-free (Compliance with Energy Star) 1 16 2 15 3 14 4 5 - 13 MAP9001 - 11 7 10 8 9 4 AUG. 2015 8 MAP9002 MAP9003 1 3 12 6 MAP9002 & MAP9003 2 13 7 6 5 Datasheet Version1.1 16 NC NC 2 15 NC Rhold 3 14 OUT0 VCC 4 13 OUT1 GND 5 12 OUT2 VIN 1 EMI 6 11 OUT3 Rhold 2 CS 7 10 NC GND 3 MODE 8 9 NC CS 4 8 OUT0 VIN 1 7 OUT1 Rhold 2 6 OUT2 GND 3 5 OUT3 CS 4 MAP9003 1 MAP9001 VIN MAP9002 - Pin Configuration 8 OUT0 7 OUT1 6 OUT2 5 OUT3 - Pin Description Pin AUG. 2015 Pin MAP9001 MAP9002, MAP9003 1 VIN VCC charging 1 VIN VCC charging 2 NC No Connection 2 Rhold HOLD turn-on voltage 3 Rhold HOLD turn-on voltage 3 GND Ground 4 VCC VCC 4 CS Current sensing 5 GND Ground 5 OUT3 Output – 3 6 EMI EMI improvement 6 OUT2 Output – 2 7 CS Current sensing 7 OUT1 Output – 1 8 MODE 8 OUT0 Output – 0 9 NC No Connection 10 NC No Connection 11 OUT3 Output – 3 12 OUT2 Output – 2 13 OUT1 Output – 1 14 OUT0 Output – 0 15 NC No Connection 16 NC No Connection Flicker-free mode High Voltage AC LED Driver Pin Configuration & Description Datasheet Version1.1 - MAP9001 AC Bridge Diode VIN OUT0 1 VCC OUT1 OUT2 14 13 OUT3 12 11 Bandgap & Ref. 4 Rhold Analog Logic & Current Control 3 Line Shape 1uF 5 8 GND - 6 MODE 7 EMI CS MAP9002 & MAP9003 AC Bridge Diode VIN OUT0 1 OUT1 8 OUT2 7 OUT3 6 5 Bandgap & Ref. Rhold Analog Logic & Current Control 2 Line Shape 3 GND AUG. 2015 4 CS High Voltage AC LED Driver Functional Block Diagram Datasheet Version1.1 PARAMETER VIN HOLD, OUT1, OUT2, OUT3 EMI,CS VCC, Rhold, MODE Operating Temperature Range Junction Temperature Range Storage Temperature Range Lead temperature(soldering, 10sec ) ESD Susceptibility HBM (Note 1) MM (Note 2) CDM (Note 3) IDMAX(DC) (Note 4) Internal MOSFET Section IDMMAX(Pulse) (Note 5) IOUT0 IOUT1 IOUT2 IOUT3 IOUT0 IOUT1 IOUT2 IOUT3 VALUE 700 -0.3 ~ 700 -0.3 ~ 6 20 -40 ~ 125 -40 ~ 150 -65 ~ 150 260 2000 200 1000 123 172 172 172 491 688 688 688 UNIT V V V V ℃ ℃ ℃ ℃ V V V mA mA mA mA mA mA mA mA Note 1: ESD tested per JESD22A-114. Note 2: ESD tested per JESD22A-115. Note 3: ESD tested per JESD22C-101E Note 4: Continuous Drain Current Note 5: Pulsed Drain Current, Pulse width ≤ 10us, duty cycle ≤ 1%, Thermal Resistance PARAMETER Thermal Resistance (θJA) , (Note4) Thermal Resistance (θJT) , (Note5) Thermal Resistance (θJA) , (Note4) Thermal Resistance (θJT) , (Note5) Thermal Resistance (θJA) , (Note4) Thermal Resistance (θJT) , (Note5) MAP9001(eSOP-16) MAP9002(eSOP-8) MAP9003(SOP-8) Note 4: Multi-layer PCB based on JEDEC standard (JESD51-7, 4Layer PCB) Note 5: The metal PCB’s diameter is MAP9001 50mm and height is 1.6t. MAP9002 53mm and height is 1.6t. MAP9003 47mm and height is 1.6t. AUG. 2015 VALUE 52.6 13.0 62.8 22.2 100.7 50.5 UNIT ℃/W ℃/W ℃/W ℃/W ℃/W ℃/W High Voltage AC LED Driver Absolute Maximum Ratings Datasheet Version1.1 Ta = 25℃, CS Resistance = 6.8Ω unless otherwise specified SYMBOL PARAMETER TEST CONDITION MIN VVIN Input voltage range Note 6 50 VVCC Operating voltage - Iop Operating current VUVLO Under voltage lockout TYP MAX UNIT 700 V 15 - V 210 465 720 uA UVLO_H - 12 - V UVLO_L - 10 - V 4.5 5.2 5.9 V 12.2 13.5 14.8 V Supply Driver Section VRhold Rhold reference voltage OVP_H Over voltage protection OVP_L Over voltage protection release ID Leak Driver leakage current IOUT0 Driver 0 current IOUT1 Driver 1 current IOUT2 Driver 2 current IOUT3 Driver 3 current IOUT_SUM VVIN = 200V, VGND = 0V VMODE = open VVIN = 200V, VGND = 0V VVIN = 200V, VGND = 0V VVIN = 200V, VGND = 0V, VOUT0~3 = 400V VVIN =200V, VOUT0 = 40V VRhold = 0V VVIN =200V, VOUT1 = 40V VRhold = 0V VVIN =200V, VOUT2 = 40V VRhold = 0V VVIN =200V, VOUT3 = 40V VRhold = 0V IOUT0 + IOUT1 + IOUT2 + IOUT3 13.2 V - - 10 uA - 85 - mA - 130 - mA - 155 - mA - 185 - mA 527.5 555 587.5 mA Internal MOSFET Section RDS(ON)1 Drain to source resistance Vd=30V, Vs=0V 255 mohm RDS(ON)2 Drain to source resistance Vd=30V, Vs=0V 130 mohm RDS(ON)3 Drain to source resistance Vd=30V, Vs=0V 130 mohm RDS(ON)4 Drain to source resistance Vd=30V, Vs=0V 131 mohm Note 6: Stress beyond the maximum ratings listed above may incur permanent damage to the device. Operating above the recommended conditions for extended time may stress the device and affect device reliability. Also the device may not operate normally above the recommended operating conditions. These are stress ratings only. AUG. 2015 High Voltage AC LED Driver Electrical Characteristics Datasheet Version1.1 High Voltage AC LED Driver Typical Operating Characteristics VOVP_L Vs. temperature Operating current Vs. temperature AUG. 2015 VOVP_H Vs. temperature Datasheet Version1.1 The surge test using our demo-board and pass 0.5KV surge voltage at input wattage 16W - MAP9001 10KΩ 1608 1A/250VAC 1uF/25V 1608 1 16 2 15 3 14 4 5 1nF/25V 1608 - MAP9001 Varistor 330VDC/250VAC 13 12 6 11 7 10 8 9 MAP9002 & MAP9003 Varistor 330VDC/250VAC 10KΩ 1608 1A/250VAC 1nF/25V 1608 2 3 4 AUG. 2015 8 MAP9002 MAP9003 1 7 6 5 High Voltage AC LED Driver Recommended Surge Protection Circuit Datasheet Version1.1 1) ESOP 16LD AUG. 2015 High Voltage AC LED Driver Physical Dimensions Datasheet Version1.1 AUG. 2015 High Voltage AC LED Driver 2) ESOP 8LD Datasheet Version1.1 High Voltage AC LED Driver 3) SOP 8LD MagnaChip Semiconductor Ltd. doesn’t not recommend the use of its products in hostile environments, including, without limitation, aircraft, nuclear power generation, medical appliances, and devices or systems in which malfunction of any product can reasonably be expected to result in a personal injury. Seller’s customers using or selling Seller’s products for use in such applications do so at their own risk and agree to fully defend and indemnify Seller. MagnaChip reserves the right to change the specifications and circuitry without notice at any time. MagnaChip does not consider responsibility for use of any circuitry other than circuitry entirely included in a MagnaChip product. is a registered trademark of MagnaChip Semiconductor Ltd. MagnaChip Semiconductor Ltd. 891, Daechi-Dong, Kangnam-Gu, Seoul, 135-738 Korea Tel : 82-2-6903-3451 / Fax : 82-2-6903-3668 ~9 www.magnachip.com AUG. 2015