Kemet C4CAYUC2680AA1J Printed circuit board mount power film capacitor Datasheet

Printed Circuit Board Mount Power Film Capacitors
C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Overview
Applications
The C4C Series is a polypropylene metallized film and polyester
double-metallized foil with polyester tape wrapping filled with
resin and tinned copper wires.
Typical applications include snubber, clamping, resonance,
coupling/decoupling, pulse and blocking.
Benefits
•
•
•
•
•
•
Self-healing
Low losses
High ripple current
High contact reliability
Suitable for high frequency applications
PP metallized and PET double-sided metallized foil
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
Part Number System
C4
C
A
M
U
B
3100
AA
Series
Type
Fire
Protection
Rated Voltage
(VDC)
Insulation
Lead Diameter
(mm)
Capacitance Code
(pF)
Packaging
C4 = MKP
Capacitors
C = Round
body,
snubber
application
A = No fire
retardant
S = Fire
retardant (on
request)
M = 850
P = 1,200
W = 2,000
Y = 3,000
U = Polyester B = 0.8
tape & resin C = 1.0
D = 1.2
protection
0=
Uninsulated
(on request)
Digits 2 – 4 indicate
the first three digits
of the capacitance
value.
First digit indicates
the number of zeros
to be added.
0
J
Capacitor
Tolerance
Length (mm)
AA = Bulk (Bag) –
Straight Leads
see "Dimensions
Table"
0 = 33
1 = 44
3 = 58
J = 5%
K = 10%
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
1
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Dimensions – Millimeters
SIDE VIEW
FRONT VIEW
LL
L
LL
D
d
D
L
d
LL
Maximum
Maximum
Nominal
±5
10 – 14
33
0.8
40
14.5 – 21.5
33
1
40
19 – 23
44
1
40
23.5 – 33.5
44
1.2
40
28.5 – 32
58
1.2
40
Qualification
Reference Standards
Application Class (DIN 40040)
Vibration Strength
VDE 0560, IEC 61071, EN 61071
GPE/LS
DIN 40040, Table 6, Class V
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
2
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Performance Characteristics
Temperature Range
Maximum Permissible Ambient
Temperature
IEC Climatic Category
Peak Non-Repetitive Maximum
Current
Test Voltage Terminal to Terminal
(VTT)
Test Voltage Terminal to Case
(VTC)
Insulation Resistance Test
Conditions
Dissipation Factor (DF)
Capacitance Deviation in
Operating Temperature Range of
-40°C to +85°C
Life Expectancy
Failure Quota
Change of Capacitance vs.
Operating Time
Protection
Flame Retardant (IEC 384–1)
Leads
Installation
Damp Heat Test
-40°C to +85°C
+70°C
40/85/56 according to IEC 68–1
IPKR x 1.5
2 Vn for 10 seconds
3 k VDC 50 Hz for 60 seconds
Temperature: +25°C ±5%
Voltage charge time: 1 minute
Test voltage: 100 VDC
Typical value (Ris x C): 3,000
seconds
≤ 5 x 10 -4 at 1 kHz and 20°C
±1.5% maximum on capacitance
value measured at +20°C
≥ 30,000 hours at VRMS, ≥ 100,000
hours at Vn
300/109 components per hour
-3% after 30,000 hours at VRMS or
after 100,000 hours at Vn
Polyester wrapping with epoxy
resin fill
Standard execution: non-flame
retardant
On request: flame retardant
execution Category C
Tinned copper (lead content = 5%)
Any position
Test Conditions
Relative humidity: 93% ± 2%
Temperature: +40°C
Test duration: 56 days
Capacitance change: ≤ ± 5%
DF change: ≤ 50% of nominal
value at 1 kHz
Insulation resistance: ≥ 50% of
limit value
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
3
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Table 1 – Ratings & Part Number Reference
Maximum
Dimensions
(mm)
Peak
VDC
D
L
Cap
Value
(µF)
VDC
VAC
0.1
0.15
0.22
0.33
0.47
0.68
1
1.5
2
2.2
2.5
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.68
1
1.2
1.5
0.022
0.033
0.047
0.068
0.1
0.15
0.22
0.33
0.47
0.56
0.68
0.0068
0.01
0.015
0.022
0.033
0.047
0.068
0.1
0.15
0.22
850
850
850
850
850
850
850
850
850
850
850
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
3000
3000
3000
3000
3000
3000
3000
3000
3000
3000
450
450
450
450
450
450
450
450
450
450
450
500
500
500
500
500
500
500
500
500
500
500
630
630
630
630
630
630
630
630
630
630
630
750
750
750
750
750
750
750
750
750
750
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1200
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
1600
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
2400
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
10.5
12.5
15.5
18.5
21.5
21
25
30.5
28.5
29.5
31.5
10
12
14
17.5
20.5
20
23
27.5
33
29
32
10.5
12.5
15
17.5
20.5
19.5
23.5
28.5
33.5
29
32
10
12
14.5
17
20.5
19
22.5
27
32
31
Capacitance
Value (µF)
VDC
VAC
Peak
VDC
D (mm)
Ripple
Current
Peak
Current
ESR
(Max)
100 kHz
70°C (A)
(A)
33
33
33
33
33
44
44
44
58
58
58
33
33
33
33
33
44
44
44
44
58
58
33
33
33
33
33
44
44
44
44
58
58
33
33
33
33
33
44
44
44
44
58
5
7
9
9
9
9
12
12
12
12
12
4
5
7
9
9
9
9
12
12
12
12
3
4
6
7
9
9
12
12
12
12
12
2
3
4
5
6
7
9
12
12
12
45
68
99
149
212
204
300
450
400
440
500
33
48
70
105
154
149
212
306
450
330
413
25
38
54
78
115
105
154
231
329
224
272
14.5
21
32
46
69
59
85
125
188
165
16.6
11.5
8.1
5.8
4.6
5.1
3.8
3.1
3.8
3.7
3.5
27.1
19.1
13.4
9.2
6.8
7.2
5.6
4.2
3.5
4.5
4
48.2
32.5
23
16.3
11.6
11.3
8
5.9
4.8
6.1
5.4
132
90.3
60.5
41.6
28.3
25.7
18.3
12.8
9.2
9.5
L (mm)
Ripple
Current
Peak
Current
ESR
dV/dt
(V/µs)
100 kHz
(mΩ)
Packaging
Quantity
Part Number
450
450
450
450
450
300
300
300
200
200
200
700
700
700
700
700
450
450
450
450
275
275
1150
1150
1150
1150
1150
700
700
700
700
400
400
2100
2100
2100
2100
2100
1250
1250
1250
1250
750
300
300
200
150
100
100
50
50
30
30
30
400
300
250
150
100
100
70
50
50
30
30
400
300
200
150
100
100
70
50
50
30
30
400
300
200
150
100
100
70
50
50
30
C4C(1)M(2)B3100AA0(3)
C4C(1)M(2)B3150AA0(3)
C4C(1)M(2)C3220AA0(3)
C4C(1)M(2)C3330AA0(3)
C4C(1)M(2)C3470AA0(3)
C4C(1)M(2)C3680AA1(3)
C4C(1)M(2)D4100AA1(3)
C4C(1)M(2)D4150AA1(3)
C4C(1)M(2)D4200AA3(3)
C4C(1)M(2)D4220AA3(3)
C4C(1)M(2)D4250AA3(3)
C4C(1)P(2)B2470AA0(3)
C4C(1)P(2)B2680AA0(3)
C4C(1)P(2)B3100AA0(3)
C4C(1)P(2)C3150AA0(3)
C4C(1)P(2)C3220AA0(3)
C4C(1)P(2)C3330AA1(3)
C4C(1)P(2)C3470AA1(3)
C4C(1)P(2)D3680AA1(3)
C4C(1)P(2)D4100AA1(3)
C4C(1)P(2)D4120AA3(3)
C4C(1)P(2)D4150AA3(3)
C4C(1)W(2)B2220AA0(3)
C4C(1)W(2)B2330AA0(3)
C4C(1)W(2)C2470AA0(3)
C4C(1)W(2)C2680AA0(3)
C4C(1)W(2)C3100AA0(3)
C4C(1)W(2)C3150AA1(3)
C4C(1)W(2)D3220AA1(3)
C4C(1)W(2)D3330AA1(3)
C4C(1)W(2)D3470AA1(3)
C4C(1)W(2)D3560AA3(3)
C4C(1)W(2)D3680AA3(3)
C4C(1)Y(2)B1680AA0(3)
C4C(1)Y(2)B2100AA0(3)
C4C(1)Y(2)C2150AA0(3)
C4C(1)Y(2)C2220AA0(3)
C4C(1)Y(2)C2330AA0(3)
C4C(1)Y(2)C2470AA1(3)
C4C(1)Y(2)C2680AA1(3)
C4C(1)Y(2)D3100AA1(3)
C4C(1)Y(2)D3150AA1(3)
C4C(1)Y(2)D3220AA3(3)
dV/dt
(V/µs)
Packaging
Quantity
Part Number
(1) A = No fire retardant; S = fire retardant (on request)
(2) U = Tape and resin protection; 0 = unprotected (on request)
(3) K = ±10%, J = ±5%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
4
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of
both our capacitors and the production of them.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of
some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'
obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has
been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any
homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To
clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.
Materials & Environment
The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention
to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the
materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium,
Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC
and Asbestos.
Green Products
All KEMET power film products are ROHS Compliant.
Insulation Resistance
When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low
insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive
humidity.
Dissipation Factor
Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down with increased
temperature. For more information, please refer to Performance Characteristics.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
5
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Sealing
Hermetically Sealed Capacitors
When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a
breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility.
Resin Encased/Wrap & Fill Capacitors
The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity environments without
degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are
somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption
is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the
capacitor section. Aqueous cleaning of circuit boards can aggravate this condition.
Barometric Pressure
The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric
pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due
to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat
transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2
losses and eventual failure.
Radiation
Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can
take place causing shorts or opens.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
6
s
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Film Dielectric
Single-sided
Metallized
Polypropylene
Printed Circuit Board Mount Power Film Capacitors – C4C Series, AxialFilm
Round, 850 – 3,000 VDC/450 – 750 VAC
Power and AC Film Capacitors
Soldering Process
4 Sections
The implementation of the RoHS Directive has required the
selection SnAgCu (SAC) alloys or SnCu alloys as primary solder.
This has increased the liquidus temperature from that of 183ºC
for SnPb eutectic alloy to 217ºC – 221ºC for the new alloys. As
a result, the heat stress to components, even in wave soldering,
has increased considerably due to higher pre-heat and wave
Polypropylene
Film/Foil capacitors are especially sensitive
temperatures.
Polypropylene
to heat (melting point of polypropylene is 160ºC – 170ºC). Wave
soldering can be destructive especially for mechanically small
Single-sided
polypropylene capacitors (lead spacings 5 – 10 mm) and
great
Metallized
Polypropylene
care must be taken Metal
during
from
Foilsoldering. The solder profiles
Polypropylene
Film
KEMET
are
highly
recommended.
You
may
also
refer
to
the
wave
Film Dielectric
Polypropylene
soldering curve from IEC Publication 61760 – 1 Edition
2. Please
Film Dielectric
consult KEMET with any questions.
tion
2 Sections
Construction
Double-sided Metallized
Polyester Film
(Second Layer)
AXIAL - Polypropylene Film/Foil
Detailed Cross Section
Margin
Metal Contact
Layer
Lead
Single-sided
Metallized
Polypropylene
Film
Margin
Lead
Polyester Tape
Wrapping
Polypropylene
Film Dielectric
Metal Foil
2 Sections
Thermosetting
Resin End-Fill
Single-sided Metallized
Polypropylene Film
Margin
(First Layer)
Margin
Thermosetting
Metal Contact
Resin End-Fill
Layer
Polyester Tape
Wrapping
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
2 Sections
Single-sided
Metallized
Polypropylene
Film
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
7
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Marking
Dielectric
Code
Series
Capacitance
Tolerance
Capacitance
Voltage
(VDC)
Operating
Temperature
Range
Voltage
(VAC)
Approval
Mark
Self
Healing
Application
Class
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
8
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
KEMET Corporation
World Headquarters
Europe
Asia
Southern Europe
Sasso Marconi, Italy
Tel: 39-051-939111
Northeast Asia
Hong Kong
Tel: 852-2305-1168
Mailing Address:
P.O. Box 5928
Greenville, SC 29606
Skopje, Macedonia
Tel: 389-2-55-14-623
Shenzhen, China
Tel: 86-755-2518-1306
www.kemet.com
Tel: 864-963-6300
Fax: 864-963-6521
Central Europe
Landsberg, Germany
Tel: 49-8191-3350800
Corporate Offices
Fort Lauderdale, FL
Tel: 954-766-2800
Kamen, Germany
Tel: 49-2307-438110
North America
Northern Europe
Wyboston, United Kingdom
Tel: 44-1480-273082
Taipei, Taiwan
Tel: 886-2-27528585
Espoo, Finland
Tel: 358-9-5406-5000
Southeast Asia
Singapore
Tel: 65-6701-8033
2835 KEMET Way
Simpsonville, SC 29681
Northeast
Wilmington, MA
Tel: 978-658-1663
Southeast
Lake Mary, FL
Tel: 407-855-8886
Central
Novi, MI
Tel: 248-994-1030
Beijing, China
Tel: 86-10-5877-1075
Shanghai, China
Tel: 86-21-6447-0707
Seoul, South Korea
Tel: 82-2-6294-0550
Penang, Malaysia
Tel: 60-4-6430200
Bangalore, India
Tel: 91-806-53-76817
Irving, TX
Tel: 972-915-6041
West
Milpitas, CA
Tel: 408-433-9950
Mexico
Guadalajara, Jalisco
Tel: 52-33-3123-2141
Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of
KEMET Electronics Corporation.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
9
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4C Series, Axial Round, 850 – 3,000 VDC/450 – 750 VAC
Prototype Sample Disclaimer
The Customer acknowledges the following limitations of the prototype samples:
(1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent final designs; have not been released for
commercial use and are not subject to the same quality control procedures applicable to released products.
(2) Prototype samples are not qualified parts and are provided “as-is” by KEMET Electronics Corporation, which specifically disclaims any and all warranties and
guarantees, explicit or implied, including, without limitation, the warranties of merchantability and fitness for a particular purpose or use.
(3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the Customer’s
production line.
(4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples.
General Disclaimer
“All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty,
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for
such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use.
This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application.
KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.”
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com
F3042_C4C_AXIAL • 4/20/2016
10
Similar pages