181 CPL www.vishay.com Vishay BCcomponents Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES • Long useful life: up to 5000 h at 105 °C • Very low ESR and highest ripple current • SMD-version with base plate, lead (Pb)-free reflow solderable • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 180 CPS 105 °C longer lifetime 181 CPL 105 °C APPLICATIONS • SMD technology, for high temperature reflow soldering Fig. 1 • Industrial and professional applications QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range • Telecommunications and IT VALUE 18 μF to 820 μF ± 20 % 4.0 V to 35 V -55 °C to +105 °C Endurance test at 105 °C 5000 h Useful life at 105 °C 5000 h Shelf life at 0 V, 105 °C 1000 h Based on sectional specification Climatic category IEC 60068 Revision: 20-May-15 • Portable and mobile equipment 6.6 x 6.6 x 5.9 to 10.4 x 10.4 x 12.6 IEC 60384-18 / CECC 32300 55/105/56 MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Blue mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (L) PACKAGING Supplied in blister tape on reel Document Number: 28417 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 181 CPL www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) CR (μF) 4.0 18 6.3 10 UR (V) 16 20 25 35 6.6 x 6.6 x 5.9 39 6.6 x 6.6 x 5.9 - - - 47 6.6 x 6.6 x 5.9 - 56 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 - 68 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 - - - 82 8.4 x 8.4 x 6.7 8.4 x 8.4 x 12 100 6.6 x 6.6 x 5.9 10.4 x 10.4 x 7.7 - - - 120 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 - - - 10.4 x 10.4 x 7.7 8.4 x 8.4 x 6.7 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 10.4 x 10.4 x 7.7 - - - - - - - - 8.4 x 8.4 x 6.7 6.6 x 6.6 x 5.9 180 220 6.6 x 6.6 x 5.9 270 8.4 x 8.4 x 6.7 8.4 x 8.4 x 6.7 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 - 6.6 x 6.6 x 5.9 10.4 x 10.4 x 7.7 - - - - 8.4 x 8.4 x 6.7 8.4 x 8.4 x 12 - - 470 10.4 x 10.4 x 7.7 10.4 x 10.4 x 12.6 - - 560 8.4 x 8.4 x 6.7 - - - - - - 680 10.4 x 10.4 x 7.7 - - - - - - 820 10.4 x 10.4 x 12.6 - - - 8.4 x 8.4 x 6.7 390 2-pin: ≤ Ø 6.3 mm HMAX. MAX. 0.3 Negative polarity A2 L 470 6.3V A2 10 16L Negative polarity 2-pin: Ø 8 mm to 10 mm min. 0.4 / max. 1.0 (2 x) 330 8.4 x 8.4 x 6.7 D WMAX. S HMAX. MAX. 0.3 D WMAX. B L1MAX. min. 0.4 / max. 1.0 (2 x) 150 B LMAX. L1MAX. S LMAX. Fig. 2 - Dimensional outline Revision: 20-May-15 Document Number: 28417 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 181 CPL www.vishay.com Vishay BCcomponents Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 6.6 x 6.6 x 5.9 0606 6.8 6.8 6 6.3 0.8 2.0 7.4 ~ 0.25 8.4 x 8.4 x 6.7 0807 8.6 8.6 7 8 1.1 3.1 9.2 ~ 0.5 8.4 x 8.4 x 12 0812 8.6 8.6 12.5 8 1.1 3.1 9.2 ~ 0.8 10.4 x 10.4 x 7.7 1008 10.6 10.6 8 10 1.3 4.7 11.2 ~ 0.9 10.4 x 10.4 x 12.6 1013 10.6 10.6 12.7 10 1.3 4.7 11.2 ~ 1.3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 6.6 x 6.6 x 5.9 0606 12 16 6.2 380 1000 8.4 x 8.4 x 6.7 0807 12 16 6.8 380 1000 8.4 x 8.4 x 12 0812 16 16 13.0 380 400 10.4 x 10.4 x 7.7 1008 16 24 10.0 380 500 10.4 x 10.4 x 12.6 1013 16 24 14.0 380 400 MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. b a c a Fig. 3 - Recommended soldering pad dimensions Revision: 20-May-15 Document Number: 28417 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 181 CPL www.vishay.com Vishay BCcomponents Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c 0606 1.9 3.5 1.6 0807 3.0 3.5 2.5 0812 3.0 3.5 2.5 1008 4.0 4.0 2.5 1013 4.0 4.0 2.5 ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS T (°C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL2180xxxE3 PROFILE FEATURES CASE CODE 0606 TO 1013 Max. time from 25 °C to TPeak 300 s Max. ramp-up rate to 150 °C 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s Max. time from 190 °C to 200 °C (t2) 110 s Ramp up rate from 200 °C to TPeak 0.5 K/s to 3 K/s Max. time above TLiquidus (217 °C) (t3) 90 s Max. time above 230 °C (t4) 70 s Peak temperature TPeak Max. time above TPeak minus 5 °C Ramp-down rate from TLiquidus 260 °C 40 s 3 K/s to 6 K/s Note • Temperature measuring point on top of the case and on terminals. Revision: 20-May-15 Document Number: 28417 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 181 CPL www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL CR IR IL2 tan Z DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % Rated RMS ripple current at 100 kHz, 105 °C Max. leakage current after 2 min at UR Max. dissipation factor at 100 Hz Max. impedance at 100 kHz Conductive polymer 181 CPL series 100 μF / 16 V; ± 20 % Nominal case size: 10.4 mm x 10.4 mm x 7.7 mm; taped on reel Ordering code: MAL218197504E3 Note • Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 4.0 6.3 10 16 20 25 35 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () ORDERING CODE MAL2181... 150 270 330 330 560 680 100 120 220 220 390 470 56 68 120 150 150 270 330 39 68 82 100 120 180 820 56 270 390 470 47 150 270 18 82 150 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 6.6 x 6.6 x 5.9 6.6 x 6.6 x 5.9 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 8.4 x 8.4 x 6.7 10.4 x 10.4 x 7.7 10.4 x 10.4 x 12.6 6.6 x 6.6 x 5.9 8.4 x 8.4 x 12 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 6.6 x 6.6 x 5.9 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 6.6 x 6.6 x 5.9 8.4 x 8.4 x 12 10.4 x 10.4 x 12.6 2570 3220 2800 3220 3600 4130 2800 2800 2800 3220 3220 4130 2300 2300 2300 2760 3020 3200 3770 2200 2200 2800 2670 2800 3430 5400 1300 4000 4950 4300 1300 2200 2700 900 2200 2600 120 216 264 264 448 544 126 151 277 277 491 592 112 136 240 300 300 540 660 125 218 262 320 384 576 2624 224 1080 1560 1880 235 750 1350 126 574 1050 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.022 0.022 0.020 0.022 0.018 0.020 0.022 0.022 0.020 0.022 0.022 0.020 0.027 0.027 0.027 0.030 0.030 0.022 0.024 0.030 0.030 0.028 0.035 0.028 0.029 0.012 0.048 0.021 0.014 0.020 0.049 0.028 0.027 0.064 0.029 0.028 97701E3 97702E3 97703E3 97704E3 97705E3 97706E3 97301E3 97302E3 97303E3 97306E3 97307E3 97308E3 97401E3 97402E3 97403E3 97404E3 97405E3 97406E3 97407E3 97501E3 97502E3 97503E3 97504E3 97505E3 97506E3 97507E3 97201E3 97202E3 97203E3 97204E3 97601E3 97602E3 97603E3 97001E3 97002E3 97003E3 Revision: 20-May-15 Document Number: 28417 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 181 CPL www.vishay.com Vishay BCcomponents Table 6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-18, subclause 4.14 Us 1.15 x UR IEC 60384-18, subclause 4.16; TA 105 °C Urev 1 V Voltage Surge voltage for short periods Reverse voltage for short periods USEFUL LIFE AND ENDURANCE Table 7 ENDURANCE TEST AND USEFUL LIFE SERIES CASE CODE USEFUL LIFE AT 105 °C (h) ENDURANCE AT 105 °C (h) ENDURANCE AT 85 °C (h) 181 CPL 0606 to 1013 5000 5000 50 000 Endurance can be calculated by formula below: L r = L 0 x 10 T0 - Tr ----------------20 Lr: estimated lifetime (h) L0: base lifetime specified at maximum operating temperature with applied the DC voltage (h) T0: rated maximum operating temperature (°C) Tr: actual ambient temperature (°C) Table 8 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” C/C: ± 5 % tan spec. limit IL2 spec. limit Endurance IEC 60384-18 / CECC 32300, subclause 4.15 Tamb = 105 °C; UR applied; for test duration see Table 7 C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; for test duration see Table 7 C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Shelf life (storage at high temperature) IEC 60384-18 / CECC 32300, subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Revision: 20-May-15 Document Number: 28417 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000