VER : PA_1 update : 2016.07.21 AC-DC Brick ABR300 SERIES 300 Watts KEY FEATURES Switching Power Module for PCB Mountable Universal Input: 90-264 VAC Full Brick Size with Base Plate Over Current Protection Short Circuit Protection Over Voltage Protection Remote ON/OFF Control Remote Sense Low No Load Power Consumption 3-Year Product Warranty (Pending) ELECTRICAL SPECIFICATIONS All specifications valid at normal input voltage, full load and +25°C after warm-up time unless otherwise stated. Please connection Fig 1.1 for standard use. Model No. ABR300-12S Max Output Wattage (W) Voltage 300W Input Output Protection Isolation ARB300-48S 90-264 VAC Frequency (Hz) 47-63 Hz Current (Full load) <5.0 A max. (115 VAC) / <2.5 A max. (230 VAC) Inrush Current (<2ms) Limited by external components (Thermistor) Leakage Current < 0.75 mA max. Power Factor (typ.) PF>0.95 (100 VAC) / PF>0.9 (200 VAC) at Full Load Voltage (V.DC.) 12V 28V 48V Trim (V.DC) 10.8 ~ 13.2V 26.6 ~ 29.4V 43.2 ~ 52.8V Voltage Accuracy ±2% 11 6.25 Current (A) (max.) 25 Line Regulation (LL-HL) (typ.) ±1% Load Regulation (5-100%) (typ.) ±1% Minimum Load 0% Maximum Capacitive Load (at 230VAC) Pending Pending Pending Ripple & Noise (max.) 120mV 200mV 240mV Efficiency (typ.) 88% 90% 91% No Load Power Consumption <0.75W Remote Sensing Provided Remote On/ Off Optional (External power supply is required) Hold-up Time Limited by external capacitor Over Current Protection Auto recovery Over Voltage Protection Auto recovery Short Circuit Protection Auto recovery, Hiccup mode Input-Output (V.AC) 3000V Input-FG (V.AC) 2000V Output-FG .(V.AC) 500V Operating Temperature Environment ABR300-28S -40°C…+100°C (On Aluminum Base Plate) Storage Temperature -40°C…+100°C Temperature Coefficient ±0.05%/°C ( 0~50°C ) Humidity 95% RH MTBF >250,000 h @ 25°C (MIL-HDBK-217F, Notice 1) Vibration 10~500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes. ( 117.3 x 61.5 x 12.7 mm ) Tolerance 0.1 mm Dimension (L x W x H) 4.62 x 2.42 x 0.5 Inches Physical Weight Pending Cooling Method Free convection Safety Agency Approvals EMI CE, UL60950-1, CB (Pending) EMC (Conducted & Radiated Emission) EMS (Noise Immunity) http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 EN 55022 class A (Conductive plane to be connected to safety earth) EN 55024、EN61000-4-2,3,4,5,6,8,11 (Pending) (Pending) -1- VER : PA_1 update : 2016.07.21 AC-DC Brick ABR300 SERIES 300 Watts CONNECTION FFOR STANDARD USE (1.) To use the ABR300 series, external parts should be connected as shown in Fig 1.1. (2.) The ABR300 series should be conduction-cooled. Use a heatsink or fan to dissipate heat. Fig 1.1 Table 1.1 (Parts name.) No. Symbol 1 F11 Input fuse AC250V/10A 325010 (Little fuse) 2 C11 Input capacitor AC275V/2.2uF ECQ U AAF225 (Panasonic) 3 CY1 Y capacitor AC250V/2200pF DE1E3KX222M (Murata Manufacturing) 4 L11 6m H/ 12A ADM-25-12-060T (Ueno) 5 L12 6m H/ 12A ADM-25-12-060T (Ueno) 6 CX1 AC275V/1.5uF ECQUAAF155 (Panasonic) 7 CX2 AC275V/1.5uF ECQUAAF155 (Panasonic) 8 CY2 AC250V/2200pF DE1E3KX222M (Murata Manufacturing) 9 CY3 AC250V/2200pF DE1E3KX222M (Murata Manufacturing) F12 *3 DC25V/2200uF ELXZ250EL L222 (Nippon Chemi-Con) F28 *3 DC50V/1000uF ELXZ500EL L102 (Nippon Chemi-Con) F48 *3 DC63V/470uF ELXZ630EL L471 (Nippon Chemi-Con) F12 *3 DC25V/10uF GRM31CR71E106 (Murata Manufacturing) F28 *3 DC50V/4.7uF GRM31CR71H475 (Murata Manufacturing) F48 *3 DC100V/2.2uF GRM31CR72A225 (Murata Manufacturing) ELXS451VSN 471 (Nippon Chemi-Con) 10 11 Co C40 Item Line Filter Noise filter X capacitor Y capacitor Output capacitor Bypass capacitor Rating 12 Cbc Smoothing capacitor for boost voltage DC450V/ 470uF 13 C20 Capacitor for boost voltage DC450V/ 0.68uF Part name AFS450V684K ×2 (parallel) (OKAYA ELECTRIC INDUSTRIES) 14 TFR1 15 R1 Inrush current limiting resistor Discharging resistor 10Ω F5K-100J14 (TAMURA THERMAL DEVICE) 68kΩ ×3 series CRS32 683 (HOKURIKU ELECTRIC 2 parallel 16 SK11 / SK21 / SK22 17 SA11 Varistor 620V TND14V-621K (Nippon Chemi-Con) Surge absorber 4kV DSA-402MA (Mitsubishi Materials) ◎ Parts name are shown in Table 1.1 as reference. ◎ External parts should be changed according to the ambient temperature, and input and output conditions. For details, refer to the selection method of individual parts. http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -2- VER : PA_1 update : 2016.07.21 AC-DC Brick ABR300 SERIES 300 Watts MECHANICAL DIMENSION (External View ) DERATING PIN# Φ Single 1 1.0±0.1%mm AC IN (L) 2 1.0±0.1%mm AC IN (N) 3 2.0±0.2%mm -DC OUT 4 2.0±0.2%mm +DC OUT 5 1.0±0.1%mm -S 6 1.0±0.1%mm +S 7 1.0±0.1%mm TRIM 8 1.0±0.1%mm ON / OFF CTL 9 1.0±0.1%mm -BC 10 1.0±0.1%mm +BC 11 1.0±0.1%mm R BLOCK DIAGRAM Pending http://www.archcorp.com.tw TEL: +886-2-26989508 FAX: +886-2-26981319 -3-