Coilcraft ML590PNB102NLZ High reliability power inductor Datasheet

1260 POWER INDUCTORS
High Reliability Power Inductors ML590PNB
■ High current, low DCR shielded power inductors
■ High temperature materials allow operation in ambient
temperatures up to 155°C
Core material Ferrite
Terminations Matte tin over nickel over phos bronze.
Weight: 2.8 g – 3.3 g
Ambient temperature –55°C to +105°C with Irms current, +105°C
to +155°C with derated current
Storage temperature Component: –55C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 500/13″ reel; Plastic
tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing,
6.6 mm pocket depth
DCR3
(mOhms)
2
Inductance
Part number1
(µH)
typ max
ML590PNB102NLZ 1.0 ±30%
5.8
6.5
ML590PNB152NLZ 1.5 ±30%
8.8
9.8
ML590PNB222NLZ 2.2 ±30% 11.5 12.8
ML590PNB332NLZ 3.3 ±30% 12.6 14.0
ML590PNB472MLZ 4.7 ±20% 13.9 15.5
ML590PNB562MLZ 5.6 ±20% 14.9 16.6
ML590PNB682MLZ 6.8 ±20% 16.6 18.5
ML590PNB822MLZ 8.2 ±20% 20.2 22.5
ML590PNB103MLZ 10 ±20%
21.5 23.9
ML590PNB123MLZ 12 ±20%
24.5 27.3
ML590PNB153MLZ 15 ±20%
30.7 34.2
ML590PNB183MLZ 18 ±20%
35.4 39.4
ML590PNB223MLZ 22 ±20%
36.6 40.7
ML590PNB273MLZ 27 ±20%
51.3 57.0
ML590PNB333MLZ 33 ±20%
54.9 61.0
ML590PNB393MLZ 39 ±20%
58.0 64.5
ML590PNB473MLZ 47 ±20%
80.1 89.0
ML590PNB563MLZ 56 ±20%
82.5 91.7
ML590PNB683MLZ 68 ±20%
94.5 105.0
ML590PNB823MLZ 82 ±20%
131.6 146.3
ML590PNB104MLZ 100 ±20% 141.8 157.6
ML590PNB124KLZ 120 ±10% 193.3 214.8
ML590PNB154KLZ 150 ±10% 215.4 239.4
ML590PNB184KLZ 180 ±10% 254.2 282.5
ML590PNB224KLZ 220 ±10% 314.1 349.0
ML590PNB274KLZ 270 ±10% 368.8 409.8
ML590PNB334KLZ 330 ±10% 481.3 534.8
ML590PNB394KLZ 390 ±10% 517.5 575.0
ML590PNB474KLZ 470 ±10% 721.2 801.4
ML590PNB564KLZ 560 ±10% 773.1 859.0
ML590PNB684KLZ 680 ±10% 867.6 964.0
ML590PNB824KLZ 820 ±10% 1158 1287
ML590PNB105KLZ 1000 ±10% 1273 1415
®
SRF
(MHz)4
min typ
70 100
56
80.0
39
55.0
29
42.0
27
38.0
21
30.0
19.0 27.0
18.0 26.0
15.0 22.0
14.0 20.0
12.6 18.0
11.2 16.0
10.5 15.0
9.0 13.0
8.7 12.4
8.4 12.0
8.0 11.6
7.3 10.5
7.0 10.0
6.0
8.6
5.5
7.8
4.8
6.8
4.5
6.4
4.3
6.1
3.9
5.5
3.0
4.3
2.8
4.0
2.5
3.6
2.1
3.0
2.0
2.8
1.8
2.6
1.7
2.5
1.6
2.4
Isat (A)5 Irms (A)6
10% 20% 30% 20°C 40°C
drop drop drop rise rise
19.12 21.18 22.76 6.00 8.00
14.44 16.40 17.64 5.30 7.60
12.32 14.00 15.08 5.20 7.30
10.88 12.22 13.12 5.00 7.00
9.92 11.10 12.00 4.50 7.00
8.54 9.60 10.38 4.00 6.40
7.80 8.80 9.44 3.80 5.90
6.44 7.38 7.98 3.40 4.80
6.00 6.92 7.48 3.00 4.00
5.68 6.56 7.08 2.80 3.70
5.34 6.04 6.54 2.60 3.50
4.82 5.54 6.00 2.50 3.30
4.42 5.04 5.44 2.30 3.10
3.78 4.32 4.68 2.10 2.90
3.50 4.00 4.34 2.00 2.70
3.32 3.80 4.14 1.90 2.60
2.84 3.26 3.54 1.85 2.50
2.64 3.04 3.28 1.75 2.40
2.46 2.82 3.04 1.70 2.30
2.24 2.54 2.74 1.60 2.20
2.06 2.34 2.54 1.50 2.10
1.84 2.08 2.28 1.38 1.85
1.64 1.90 2.06 1.20 1.66
1.46 1.70 1.84 1.14 1.58
1.30 1.48 1.60 1.00 1.42
1.18 1.38 1.48 0.90 1.45
1.04 1.20 1.30 0.84 1.16
1.00 1.16 1.28 0.78 1.08
0.906 1.00 1.10 0.70 0.96
0.872 0.980 1.02 0.64 0.88
0.782 0.886 0.956 0.58 0.80
0.692 0.784 0.854 0.53 0.73
0.588 0.672 0.726 0.48 0.68
ML590PNB824KLZ
Testing: Z = COTS
H = Screening per Coilcraft
CP‑SA‑10001
N = Screening per Coilcraft
CP‑SA‑10004
2. Inductance tested at 100 kHz, 0.1 Vrms,
0 Adc using an Agilent/HP 4263B LCR
meter or equivalent.
3. DCR measured on a micro-ohmmeter and a
Coilcraft CCF858 test fixture.
4. SRF measured using an Agilent/HP 8753D
network analyzer.
5. DC current at which the inductance drops
the specified amount from its value without
current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount
Components” before soldering.
Specifications subject to change without notice.
Please check our website for latest information. Document ML599-1
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
1. When ordering, please specify testing code:
Phone 800-981-0363
Fax 847-639-1508
Revised 09/19/2011
E-mail [email protected]
Web www.coilcraft-cps.com
1260 POWER INDUCTORS
ML590PNB Series
Typical L vs Frequency
Typical L vs Current
10000
10000
1000 µH
100 µH
100
10 µH
10
1 µH
1
0.1
0.01
1000 µH
1000
Inductance (µH)
Inductance (µH)
1000
100 µH
100
10 µH
10
1 µH
1
1
0.1
10
0.1
0.1
10
1
Frequency (MHz)
100
Current (A)
Current Derating
120
100
90
80
70
60
50
40
25°C
Percent of rated Current
110
30
20
10
0
-55 -40
Isat
Irms
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
Dimensions are in
®
Specifications subject to change without notice.
Please check our website for latest information.
1102 Silver Lake Road
Cary IL 60013
© Coilcraft, Inc. 2011
inches
mm
Document ML599-2
Phone 800-981-0363
Fax 847-639-1508
Revised 09/19/11
E-mail [email protected]
Web www.coilcraft-cps.com
Similar pages