BYWE29-50, BYWE29-100, BYWE29-150, BYWE29-200 www.vishay.com Vishay General Semiconductor Ultrafast Rectifier FEATURES • Power pack TO-220AC • Glass passivated pellet chip junction • Ultrafast recovery time • Low switching losses, high efficiency • Low forward voltage drop • High forward surge capability • Solder dip 275 °C max. 10 s, per JESD 22-B106 2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 1 BYWE29-xxx PIN 1 PIN 2 TYPICAL APPLICATIONS CASE For use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, DC/DC converters, and other power switching application. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 8.0 A VRRM 50 V, 100 V, 150 V, 200 V IFSM 100 A trr 25 ns VF 0.8 V TJ max. 150 °C Package TO-220AC Diode variations Single die Case: TO-220AC Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: As marked Mounting Torque: 10 in-lbs max. MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYWE29-50 BYWE29-100 BYWE29-150 BYWE29-200 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 150 200 V Maximum RMS voltage VRMS 35 70 105 140 V Maximum DC blocking voltage VDC 50 100 150 200 V Maximum average forward rectified current at TC = 105 °C IF(AV) 8.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 100 A TJ, TSTG -65 to +150 °C Operating and storage temperature range ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage TEST CONDITIONS IF = 20 A TJ = 25 °C IF = 8.0 A TJ = 150 °C TC = 25 °C TC = 100 °C SYMBOL BYWE29-50 BYWE29-100 BYWE29-150 BYWE29-200 VF (1) IR 1.3 0.8 10 500 UNIT V μA Maximum reverse recovery time IF = 1 A, VR = 30 V, dI/dt = 100 A/μs, Irr = 10 % IRM trr 25 ns Typical junction capacitance 4.0 V, 1 MHz CJ 45 pF Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 23-Feb-16 Document Number: 87922 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYWE29-50, BYWE29-100, BYWE29-150, BYWE29-200 www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL BYWE29-50 BYWE29-100 BYWE29-150 BYWE29-200 Typical thermal resistance from junction to case per leg RJC 2.5 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N TO-220AC UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.80 45 50/tube Tube BYWE29-200-E3/45 RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Instantaneous Forward Current (A) Average Forward Rectified Current (A) 10 Resistive or Inductive Load 8 6 4 2 25 50 75 100 125 150 0.1 0.6 0.8 1.0 1.2 Case Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Maximum Forward Current Derating Curve Fig. 3 - Typical Instantaneous Forward Charateristics 100 Instantaneous Reverse Leakage Current (μA) 100 Peak Forward Surge Current (A) 1 0.01 0.4 0 0 10 80 60 40 20 0 TJ = 125 °C TJ = 100 °C 10 1 0.1 TJ = 25 °C 0.01 1 10 100 0 20 40 60 80 100 Number of Cycles at 50 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 4 - Typical Reverse Leakage Charateristics Revision: 23-Feb-16 Document Number: 87922 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BYWE29-50, BYWE29-100, BYWE29-150, BYWE29-200 www.vishay.com Vishay General Semiconductor Junction Capacitance (pF) 80 70 60 50 40 30 20 0.1 1 10 100 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC 0.185 (4.70) 0.175 (4.44) 0.415 (10.54) MAX. 0.159 (4.04) DIA. 0.143 (3.64) DIA. 0.113 (2.87) 0.103 (2.62) 0.055 (1.39) 0.045 (1.14) 0.260 (6.6) 0.236 (6.0) 0.603 (15.32) 0.573 (14.55) 1 2 0.160 (4.06) 0.140 (3.56) 0.060 (1.50) 0.047 (1.20) 0.560 (14.22) 0.530 (13.46) PIN 1 0.040 (0.84) 0.024 (0.62) PIN 2 0.20 (5.08) CASE 0.022 (0.56) 0.014 (0.36) Revision: 23-Feb-16 Document Number: 87922 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000