DCSDW02 SERIES Up to 2.01 Watts DC/DC Converter Single and Dual Outputs Rev A DIP Type (Standard) SMD Package (“S” Suffix) Size: 0.56in x 0.36in x 0.40in (14.2mm x 9.1mm x 10.2mm) Size: 0.52in x 0.36in x 0.40in (13.2mm x 9.1mm x 10.2mm) OPTIONS • • • • FEATURES SMD or SIP Package Type Input Voltage Single or Dual Output Isolation APPLICATIONS • • • • • • • • • • • High Efficiency up to 84% • No Minimum Load Required • 1600VDC Input to Output Isolation and 3000VDC for Option • CE Marked • Compliant to RoHS II & REACH • UL60950-1, EN60950-1, and IEC60950-1 Safety Approvals 4:1 Ultra Wide Input Range Single and Dual Outputs Ultra Small Package SMD and DIP Packages Available SMD Package Qualified for Lead Free Reflow Solder Process According to IPC J-STD-020D • Short Circuit Protection • Remote Control DESCRIPTION Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment The DCSDW02 series of DC/DC converters offers up to 2.01 watts of output power in a compact DIP or SMD package. This series consists of single and dual outputs with ultra wide 4:1 input voltage range. Each model in this series has high efficiency, no minimum required load, short circuit protection, and is CE marked and compliant to RoHS II & REACH. This series has 1600VDC input to output isolation and UL60950-1, EN60950-1, and IEC60950-1 safety approvals. Please call factory for order details. MODEL SELECTION TABLE Single Output Models Model Number DCSDW02-12S33 DCSDW02-12S05 DCSDW02-12S12 DCSDW02-12S15 DCSDW02-12S24 DCSDW02-24S33 DCSDW02-24S05 DCSDW02-24S12 DCSDW02-24S15 DCSDW02-24S24 DCSDW02-48S33 DCSDW02-48S05 DCSDW02-48S12 DCSDW02-48S15 DCSDW02-48S24 9/21/2016 Input Voltage Range 12VDC (4.5~18) 24VDC (9~36) 48VDC (18~75) Output Voltage Output Current @Full Load 3.3VDC 5VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC 3.3VDC 5VDC 12VDC 15VDC 24VDC 500mA 400mA 167mA 134mA 83mA 500mA 400mA 167mA 134mA 83mA 500mA 400mA 167mA 134mA 83mA Ripple & Noise 50mVp-p 50mVp-p 50mVp-p No Load Input Current 25mA 30mA 30mA 30mA 30mA 15mA 18mA 18mA 18mA 18mA 8mA 8mA 11mA 11mA 11mA Output Power Up to 2.01 Up to 2.01 Up to 2.01 Maximum Capacitive Load Efficiency 2200µF 1000µF 550µF 440µF 200µF 2200µF 1000µF 550µF 440µF 200µF 2200µF 1000µF 550µF 440µF 200µF 77% 80% 83% 84% 84% 76% 79% 82% 83% 82% 75% 81% 83% 82% 82% Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 5 DCSDW02 SERIES Up to 2.01 Watts DC/DC Converter Single and Dual Outputs Rev A MODEL SELECTION TABLE Dual Output Models Input Voltage Range Model Number DCSDW02-12D05 DCSDW02-12D12 DCSDW02-12D15 DCSDW02-24D05 DCSDW02-24D12 DCSDW02-24D15 DCSDW02-48D05 DCSDW02-48D12 DCSDW02-48D15 12VDC (4.5~18) 24VDC (9~36) 48VDC (18~75) Output Voltage Output Current @Full Load ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±5VDC ±12VDC ±15VDC ±200mA ±83mA ±67mA ±200mA ±83mA ±67mA ±200mA ±83mA ±67mA Ripple & Noise 50mVp-p 50mVp-p 50mVp-p No Load Input Current 30mA 30mA 30mA 18mA 18mA 18mA 11mA 11mA 11mA Output Power Maximum Capacitive Load Efficiency ±660µF ±330µF ±220µF ±660µF ±330µF ±220µF ±660µF ±330µF ±220µF 80% 84% 84% 80% 82% 81% 79% 82% 82% Up to 2.01 Up to 2.01 Up to 2.01 SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max 4.5 9 18 12 24 48 18 36 75 25 50 100 Unit INPUT SPECIFICATIONS Input Voltage Range Input Surge Voltage (1 second, max.) Input Reflected Ripple Current(1) Input Filter OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation 12Vin(nom) 24Vin(nom) 48Vin(nom) 12Vin(nom) 24Vin(nom) 48Vin(nom) Start-Up Time Low Line to High Line at Full Load No Load to Full Load Single Dual Asymmetrical Load 25%/100% FL; Dual Outputs -1.0 -0.2 -1.0 -0.5 -0.8 -5.0 Measured by 20MHz Bandwidth 25% Load step change Constant Resistive Load Power Up Remote ON/OFF Temperature Coefficient REMOTE ON/OFF CONTROL Positive Logic VDC 20 Capacitor Type 10% Load to 90% Load Cross Regulation Output Power Output Current Maximum Capacitive Load Ripple & Noise Transient Response Recovery Time VDC See Table +1.0 +0.2 +1.0 +0.5 +0.8 +5.0 See Table See Table See Table 50 500 5 10 5 -0.02 Ctrl Pin Applied Current via 1kΩ Remote Off Input Current DC-DC ON DC-DC OFF 2.0 mAp-p % % % % % mVp-p µS Ms 10 +0.02 %/ºC Open or High Impedance 3.0 4.0 2.5 mA mA Application Circuit PROTECTION Short Circuit Protection 9/21/2016 Continuous Automatic Recovery Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 5 DCSDW02 SERIES Up to 2.01 Watts DC/DC Converter Single and Dual Outputs Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit ENVIRONMENTAL SPECIFICATIONS Operating Ambient Temperature Storage Temperature Range Relative Humidity Thermal Shock Vibration MTBF GENERAL SPECIFICATIONS Efficiency Switching Frequency Isolation Voltage (1 minute) Isolation Resistance Isolation Capacitance Without Derating With Derating -40 80 -55 5 MIL-HDBK-217F, Full Load 80 +105 +125 95 MIL-STD-810F MIL-STD-810F 6,204,000 ºC ºC %RH Hours See Table 100 1600 3000 1 Standard “H” Suffix 500VDC Standard “H” Suffix kHz VDC GΩ 50 50 IPC J-STD-020D IPC J-STD-033B Level 2 Lead-Free Reflow Solder Process Moisture Sensitivity Level (MSL) PHYSICAL SPECIFICATIONS Weight 0.10oz (2.7g) 0.52in x 0.36in x 0.40in (13.2mm x 9.1mm x 10.2mm) 0.56in x 0.36in x 0.40in (14.2mm x 9.1mm x 10.2mm) Non-Conductive Black Plastic Non-Conductive Black Plastic Silicone (UL94 V-0) DIP Type Dimensions (L x W x H) SMD Type Case Material Base Material Potting Material SAFETY CHARACTERISTICS UL60950-1 EN60905-1 IEC60950-1 EN55022 Safety Approvals EMI(1) ESD EN61000-4-2 Radiated Immunity Fast Transient(2) Surge(2) Power Frequency Magnetic Field EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-8 pF Air ±8kV Contact ±6kV 10 V/m ±2kV ±1kV 100A/m continuous; 1000A/m 1 second Class A, Class B Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A NOTES 1. The standard module meets EMI Class A or Class B and input reflected ripple current with external components. For further information, please contact factory. 2. An external input filter capacitor is required if the module is to meet EN61000-4-4, EN61000-4-5. Suggested filter: Nippon chemi-con KY series, 220µF/100V. CAUTION: This power module is not internally fused. An input line fuse must always be used. *Due to advances in technology, specifications subject to change without notice. 9/21/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 5 DCSDW02 SERIES Up to 2.01 Watts DC/DC Converter Single and Dual Outputs Rev A CHARACTERISTIC CURVES DCSDW02-48S05 Efficiency vs. Input Voltage DCSDW02-48S05 Derating Curve DCSDW02-48S05 Efficiency vs. Output Current MECHANICAL DRAWINGS SMD Type PIN 1 2 4 5 6 7 PIN CONNECTION SINGLE DUAL +Vin +Vin -Vin -Vin Ctrl Ctrl NC -Vout -Vout Common +Vout +Vout DIP Type 1. 2. 3. 4. 9/21/2016 All dimensions in inch (mm) Tolerance: x.xx±0.02 (x.x±0.5) x.xxx±0.01 (x.xx±0.25) Pin pitch tolerance ±0.01 (0.25) Pin dimension tolerance ±0.004(0.1) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 5 DCSDW02 SERIES Up to 2.01 Watts DC/DC Converter Single and Dual Outputs Rev A MODEL NUMBER SETUP DCSDW 02 Series Name Output Power - 12 S 33 S H Input Voltage Output Quantity Ouptut Voltage Package Type Isolation Option 12: 4.5~18VDC S: Single 33: 3.3VDC 24: 9~36VDC 05: 5VDC 48: 18~75VDC 12: 12VDC None: DIP S: SMD None: 1600VDC H: 3000VDC 15: 15VDC 24: 24VDC D:Dual 05: ±5VDC 12: ±12VDC 15: ±15VDC COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 9/21/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 5