GT Connectors – accessories 10-40450, 10-36675, 10-580649 sealing gaskets PLAIN FLAT GASKET The Amphenol® plain flat gasket of synthetic rubber material is provided to take complete advantage of waterproof and pressure sealing features. It is for use with the flange mounted receptacle. .031± .010 .08 ± 0.3 mm C A .020 ± .004 0.5 ± 0.1 mm SHIELDING A C LOW TEMPERATURE GASKET This gasket is provided for applications where the major requirement is resistance to the injurious effects of extremely low temperature. Even at temperatures as low as –67°F this gasket retains its resiliency and will seal a pressure differential of 30 psi. .031 ± .010 0.8 ± 0.3 mm LOW TEMPERATURE D 4 HOLES B SHIELDING GASKET This flat gasket is provided to give the maximum in connector performance. Its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sensitivity and low signal strength while retaining the sealing characteristics of the plain gasket. This gasket is for use with the flange mounting receptacle. Additional versions of gaskets are available including low smoke zero halogen, and also high temperature and conductive types. Consult Amphenol lndustrial Operations, Sidney NY, for further information. Installation Dimensions MS Shell Size A ± .010 Front Panel Versions B + .016 – .000 Rear Panel Version B + .016 – .000 Order Data for Front Panel Mount Gaskets C + .016 – .000 D ± .010 10SL .719 .625 .724 1.000 .172 14S .906 .875 .976 1.188 .172 16S .969 1.000 1.087 1.281 .172 16 .969 1.000 1.087 1.281 .172 18 20 1.063 1.156 1.125 1.250 1.220 1.354 1.375 1.500 .203 .203 22 1.250 1.375 1.480 1.625 .203 24 1.375 1.500 1.618 1.750 .203 28 32 1.563 1.750 1.750 2.000 1.846 2.110 2.000 2.250 .203 .219 36 1.938 2.188 2.354 2.500 .219 40 2.188 2.438 2.587 2.750 .219 10SL Front Panel Shielding Version A ± 0.2 Front Panel Versions B + 0.4 – 0.0 Rear Panel Version B + 0.4 – 0.0 C + 0.4 – 0.0 18.2 15.9 18.4 25.4 10-40450-10S 10-36675-10 LS-40450-10 10-40450-14S 10-36675-14 LS-40450-14 10-40450-16 10-40450-16S 10-36675-16 LS-40450-16 10-40450-18 10-40450-18S 10-36675-18 LS-40450-18 10-40450-20 10-40450-20S 10-36675-20 LS-40450-20 10-40450-22 10-40450-22S 10-36675-22 LS-40450-22 10-40450-24 10-40450-24S 10-36675-24 LS-40450-24 10-40450-28 10-40450-28S 10-36675-28 LS-40450-26 10-40450-32 10-40450-32S 10-36675-32 LS-40450-32 10-40450-36 10-40450-36S 10-36675-36 LS-40450-36 10-40450-40 10-40450-40S 10-36675-40 LS-40450-40 D ± 0.2 Rear Panel Low Smoke ZH Version 10-580649-11 LS-580649-11 4.36 10-580649-14 LS-580649-14 LS-580649-16 14S 23.0 22.2 24.8 30.2 4.36 10-580649-16 16S 24.6 25.4 27.6 32.5 4.36 10-580649-18 LS-580649-18 16 24.6 25.4 27.6 32.5 4.36 10-580649-20 LS-580649-20 18 27.0 28.57 31.0 35.0 5.15 10-580649-22 LS-580649-22 LS-580649-24 20 29.4 31.75 34.4 38.1 5.15 10-580649-24 22 31.8 34.9 37.6 41.2 5.15 10-580649-26 LS-580649-26 24 34.9 38.1 41.1 44.5 5.15 10-580649-32 LS-580649-32 28 39.7 44.45 46.9 50.8 5.15 10-580649-36 LS-580649-36 10-580649-40 LS-580649-40 44.5 50.8 53.6 57.2 5.56 36 49.2 55.57 59.8 63.5 5.56 40 55.6 61.92 65.7 69.9 5.56 Front Panel Low Smoke ZH Version 10-40450-14 Rear Panel Plain Version 32 Front Panel Low Temperature Version 10-40450-10 Order Data for Rear Panel Mount Gaskets Installation Dimensions MS Shell Size Front Panel Plain Version 79 GT Connectors – accessories receptacle protection caps • • • Protective metal caps which seal the front of receptacles Includes a chain for retention of the cap at the required location For receptacles: GT00, 01, 02, 020, 030, 070 * 10-580902-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580902-113. LL Inches Black anodize L Max. 11 .173 14 .173 16 Shell Size D Finish D + .020 – .000 Suffix N Max. LL Approx. .700 .905 5.000 .700 1.181 5.000 .173 .700 1.280 5.000 17 .173 .900 1.280 5.000 18 .173 .900 1.457 5.000 20 .173 .900 1.594 5.000 22 .173 .900 1.713 5.000 24 .173 .900 1.850 5.000 28 .220 .900 2.126 7.480 32 .261 .900 2.382 7.480 36 .261 .900 2.638 7.480 40 .261 .900 2.874 7.480 -XXZ Olive drab cadmium plate -XX3 Olive drab cadmium nickel base -XX9 Electroless nickel -XXG Green zinc cobalt -XXU Black zinc cobalt -XXY Millimeters D + 0.5 – 0.0 L Max. N Max. LL Approx. 11 4.4 17.8 23.0 127 14 4.4 17.8 30.0 127 16 4.4 17.8 32.5 127 17 4.4 22.9 32.5 127 18 4.4 22.9 37.0 127 20 4.4 22.9 40.5 127 22 4.4 22.9 43.5 127 24 4.4 22.9 47.0 127 28 5.6 22.9 54.0 190 32 5.6 22.9 60.5 190 36 5.6 22.9 67.0 175 40 5.6 22.9 73.0 190 Shell Size All dimensions for reference only. 80 GT Connectors – accessories plug protection caps • • • Protective metal caps which seal the front of plugs Includes a chain for retention of the cap at the required location For plugs: GT06, 08 * 10-580903-XXX L N * To complete order number, add shell size and suffix number. For example, shell size 11 with olive drab cadmium plate would be 10-580903-113. LL Inches D Finish Black anodize D + .020 – .000 L Max. 11 .157 14 .157 16 Shell Size Suffix N Max. LL Approx. .945 .807 5.000 .945 1.059 5.000 .157 .945 1.169 5.000 17 .157 .945 1.169 5.000 18 .157 .945 1.303 5.000 20 .189 1.260 1.437 5.520 22 .189 1.260 1.563 5.520 24 .189 1.260 1.701 5.520 28 .220 1.260 1.929 7.480 32 .261 1.260 2.193 7.480 36 .261 1.260 2.437 7.480 40 .261 1.260 2.665 7.480 Shell Size D + 0.5 – 0.0 L Max. N Max. LL Approx. 11 4.0 24 20.5 127 14 4.0 24 26.9 127 16 4.0 24 29.7 127 17 4.0 24 29.7 127 18 4.0 24 33.1 127 20 4.8 32 36.5 140 22 4.8 32 39.7 140 24 4.8 32 43.2 140 28 4.8 32 49.0 190 32 5.6 32 55.7 190 36 5.6 32 61.9 190 40 5.6 32 67.7 190 -XXZ Olive drab cadmium plate -XX3 Olive drab cadmium nickel base -XX9 Electroless nickel -XXG Green zinc cobalt -XXU Black zinc cobalt -XXY Millimeters All dimensions for reference only. 81 GT Connectors – accessories MS3057-A style cable clamp • • Concentric cable clamps, insure strain relief and central location of the cable Can be used with bushing MS3420 G D Q E F V B Inches Part Number Used with Shell Size Used with Bushing V Thread Class 2B B D G F 97-3057-1004 10SL MS3420-4 .315 .395 .812 .866 .6250-24 UNEF 97-3057-1007 14S MS3420-6 .442 .395 .875 1.063 .7500-20 UNEF 97-3057-1008 16 - 16S MS3420-8 .568 .395 .945 1.145 .8750-20 UNEF 97-3057-1010 18 MS3420-10 .633 .395 .945 1.244 1.0000-20 UNEF 97-3057-1012 20 - 22 MS3420-12 .758 .395 .945 1.475 1.1875-18 UNEF 97-3057-1016 24 - 28 MS3420-16 .948 .395 1.031 1.700 1.4375-18 UNEF 97-3057-1020 32 MS3420-20 1.256 .460 1.094 2.055 1.7500-18 UNS 97-3057-1024 36 MS3420-24 1.380 .520 1.157 2.265 2.0000-18 UNS 10-824810-028 40 MS3420-28 1.625 .520 1.685 2.683 2.2500-16 UN Millimeters Part Number Used with Shell Size Used with Bushing B D G F MS3420-4 8.0 10.0 20.6 22 27 97-3057-1004 10SL 97-3057-1007 14S MS3420-6 11.0 10.0 22.2 97-3057-1008 16 - 16S MS3420-8 14.4 10.0 24.0 29 97-3057-1010 18 MS3420-10 16.1 10.0 24.0 32 97-3057-1012 20 - 22 MS3420-12 19.2 10.0 24.0 37 97-3057-1016 24 - 28 MS3420-16 24.1 10.0 26.2 43 97-3057-1020 32 MS3420-20 31.9 11.7 27.8 52 97-3057-1024 36 MS3420-24 35.0 13.2 29.4 58 10-824810-028 40 MS3420-28 41.3 13.2 42.8 68 All dimensions for reference only. 82 GT Connectors – accessories MS3420 bushing • • Bushing of synthetic rubber to be used with cable clamps for protection of the cable or wires Can be telescoped for smaller cable diameters A D 1.6mm .062 in. C B Inches Part Number Used with Cable Clamp A B C D MS3420-3 M85049/41-3A .130 .210 .379 2.875 MS3420-4 M85049/41-4A .220 .302 .505 2.750 MS3420-6 M85049/41-6A .312 .427 .619 2.625 MS3420-8 M85049/41-8A .437 .552 .744 2.500 MS3420-10 M85049/41-10A .562 .615 .889 2.375 MS3420-12 M85049/41-12A .625 .740 1.084 2.250 MS3420-16 M85049/41-16A .750 .927 1.314 2.125 MS3420-20 M85049/41-20A .937 1.240 1.598 2.000 MS3420-24 M85049/41-24A 1.250 1.365 1.847 1.875 MS3420-28 M85049/41-28A 1.375 1.614 2.085 1.750 Part Number Used with Cable Clamp A B C D MS3420-3 M85049/41-3A 3.30 5.3 9.60 73.0 MS3420-4 M85049/41-4A 5.58 7.7 12.80 69.8 MS3420-6 M85049/41-6A 7.92 10.8 15.70 66.8 MS3420-8 M85049/41-8A 11.09 14.0 18.90 63.5 MS3420-10 M85049/41-10A 14.27 15.6 22.58 60.3 MS3420-12 M85049/41-12A 15.87 18.8 27.50 57.1 MS3420-16 M85049/41-16A 19.05 23.5 33.40 53.9 MS3420-20 M85049/41-20A 23.79 31.5 40.60 50.8 MS3420-24 M85049/41-24A 31.75 34.7 46.90 47.6 MS3420-28 M85049/41-28A 34.92 41.0 52.90 44.4 Millimeters All dimensions for reference only. 83 GT Connectors – accessories MS3057-C style (10-350349) cable clamp • • • Waterproof clamp for jacketed cables Provides mechanical strain relief plus concentric clamping over a wide range of cable sizes A neoprene* gland seal ensures a waterproof seal on the cable jacket * Other materials available V G F A B E To reduce diameter B, use rubber brushing MS3420A Part Number 10-350349-123 Used with Shell Size 10SL A Thread Class 2B in inches V Thread Class 2A in inches .6250-24 UNEF Used with Bushing 6-32 UNC Bushing Opening Inches Busing Opening Millimeters Open Closed Open MS3420-4A .219 .010 5.56 Closed 0.25 .312 .219 .114 .020 7.93 5.56 2.89 0.50 10-350349-143 14S .7500-20 UNEF 6-32 UNC MS3420-6A MS3420-4A 10-350349-163 16 & 16S .8750-20 UNEF 6-32 UNC MS3420-8A MS3420-6A .437 .312 .220 .085 11.10 7.93 5.60 2.15 10-350349-183 18 1.0000-20 UNEF 6-32 UNC MS3420-10A MS3420-6A .437 .312 .197 .085 11.10 7.93 5.00 2.15 10-350349-203 20 & 22 1.1875-18 UNEF 8-32 UNC MS3420-12A MS3420-8A .541 .437 .270 .177 13.74 11.10 6.85 4.50 10-350349-243 24 & 28 1.4375-18 UNEF 8-32 UNC MS3420-16A MS3420-12A MS3420-8A .748 .541 .437 .429 .260 .186 19.00 13.74 11.10 10.90 6.60 4.72 10-350349-323 32 1.7500-18 UNS .250-20 UNC MS3420-20A MS3420-16A MS3420-12A .937 .748 .541 .620 .441 .273 23.80 19.00 13.74 15.74 11.20 6.93 10-350349-363 36 2.0000-18 UNS .250-20 UNC MS3420-24A MS3420-20A MS3420-16A 1.122 .937 .748 .681 .504 .358 28.50 23.80 19.00 17.30 12.80 9.10 10-350349-403 40 2.2500-16 UN .250-20 UNC MS3420-28A MS3420-20A MS3420-16A 1.250 .937 .748 .815 512 368 31.75 23.80 19.00 20.70 13.00 9.34 Inches B Part Number Used with Shell Size Open Closed E ± .016 F ± .008 G + .020 – .000 Millimeters Open B Closed E ± 0.4 F ± 0.2 G + 0.5 – 0.0 32.3 10-350349-123 10SL .312 .094 .748 .890 1.272 7.93 2.38 19.0 22.6 10-350349-143 14S .438 .230 .874 1.016 1.272 11.12 5.84 22.2 25.8 32.3 10-350349-163 16 & 16S .531 .315 1.000 1.106 1.272 13.48 8.00 25.4 28.1 32.3 10-350349-183 18 .625 .378 1.122 1.220 1.390 15.87 9.60 28.5 31.0 35.3 10-350349-203 20 & 22 .748 .445 1.311 1.469 1.406 19.00 11.30 33.3 37.3 35.7 10-350349-243 24 &28 .937 .610 1.559 1.654 1.516 23.80 15.50 39.6 42.0 38.5 10-350349-323 32 1.250 .921 1.874 2.126 1.764 31.75 23.40 47.6 54.0 44.8 10-350349-363 36 1.378 .921 2.122 2.248 2.031 35.00 23.40 53.9 57.1 51.6 10-350349-403 40 1.624 1.177 2.374 2.500 2.031 41.25 29.90 60.3 63.5 51.6 All dimensions for reference only. 84 GT – accessories rear mounting data, panel cut-out dimensions, sealing plugs, sealing ranges REAR MOUNTING DATA MAXIMUM PANEL THICKNESS GROMMET HOLE SEALING RANGES Sealing Range D MAX. Hole Size (mm) Inches 16 1.62 – 3.3 .064 – .130 12 2.89 – 4.31 .114 – .170 8 4.16 – 6.47 .164 – .255 4 6.9 – 9.3 .272 – .370 0 10.5 – 13.97 .415 – .550 Dimension D GT00/020 GT030 Size Inches (mm) Inches (mm) 10SL .146 3.70 .303 7.70 14S .146 3.70 .303 7.70 16S .146 3.70 .303 7.70 16 .145 3.70 .242 6.15 18 .145 3.70 .303 7.70 20 .145 3.70 .303 7.70 22 .145 3.70 .303 7.70 24 .207 5.25 .303 7.70 28 .207 5.25 .343 8.70 32 .241 6.10 .309 7.85 36 .241 6.10 .309 7.85 40 .237 6.02 .309 7.85 SEALING PLUG 10-405996-XX B DIA. C Sealing plugs are used to fill unused holes in multi-holed grommet configurations. A DIA. C DIA. Connector Styles +.030 .135 –.025 in. + 0.8 mm 3.4 – 0.6 45O Inches Contact Size Wire Size 10-405996-16 16 20-16 10-405996-12 12 14-12 10-405996-8 8 10-8 Red .185 .315 .470 10-405996-4 4 4-6 Blue .310 .415 .470 10-405996-0 0 0-2 Yellow .440 .605 1.000 Order No. A Dia. ±.010 B ±.005 C ±.010 Blue .083 .133 .564** Yellow .121 .171 .564** B ± 0.1 C ± 0.2 2.1 3.4 14.3*** 3.1 4.3 14.3*** 4.7 8.0 11.9 7.9 10.5 11.9 11.2 15.4 25.4 *** ± 0.5 (mm) Shell Size A Dia. Hole Size 02, 020, 00, 030 B ±.004 Front Mount 02, 00, 020 C Dia. Rear Mount 030 C Dia. Jam Nut 070 Jam Nut 070 D Dia. E 10SL .126 .717 11/16 1 3/4 7/8 .83 14S .126 .906 13/16 1 1 1/8 16S/16 .126 .969 15/16 1 1/8 1 1/14 1.21 18 .126 1.063 1 1/16 1 1/4 1 3/8 1.32 20 .126 1.157 1 3/16 1 3/8 1 1/2 1.45 22 .126 1.252 1 5/16 1 1/2 1 5/8 1.57 24 .146 1.374 1 7/16 1 5/8 1 3/4 1.70 28 .146 1.563 1 11/16 1 7/8 2 1.95 32 .169 1.752 1 15/16 2 1/8 2 1/4 2.20 36 .169 1.937 2 1/8 2 3/8 2 1/2 2.45 40 .169 2.185 2 3/8 2 5/8 2 3/4 2.70 1.08 All dimensions for reference only. Millimeters A Dia. ± 0.2 ** ± .020 (in.) E TYP. PANEL CUT-OUT DIMENSIONS A DIA. Color Code D DIA. B TYP. 85 GT Connectors crimp contacts and application tools Machined from copper alloys and silver or gold plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all MS insert arrangements and are identified with an Amphenol® proprietary number. CRIMP CONTACTS CRIMP CONTACT DATA APPLICATION TOOLS PART NUMBER PIN CONTACT SILVER GOLD(“D”) SOCKET CONTACT SILVER GOLD(“D”) MATING SIZE WIRE WELL 10-40553 10-597160-15D 10-597109-161 10-597109-16D 10-606014-40 10-597160-40D 10-597109-401 10-597109-40D 10-606014-221 10-597160-19D 10-597109-191 10-597109-19D 10-606014-291 10-597160-34D 10-597109-341 10-597109-34D 10-606014-46 10-597160-46D 10-597109-461 10-597109-46D 20-24 10-40557 10-597160-16D 10-597109-171 10-597109-17D 16-18-20 10-606014-022 10-597160-22D 10-597109-221 10-597109-22D 10-606014-171 10-597160-17D 10-597109-141 10-597109-14D 10-606014-311 10-597160-33D 10-597109-331 10-597109-33D 10-606014-361 10-597160-36D 10-597109-361 10-597109-36D 20-24 10-606014-121 10-597160-12D 10-597109-131 10-597109-13D 12-14 10-606014-231 10-597160-23D 10-597109-231 10-597109-23D 8-10 10-606014-251 10-597160-26D 10-597109-261 10-597109-26D 10-606014-271 10-597160-27D 10-597109-271 10-597109-27D 10-606014-261 10-597160-24D 10-597109-241 10-597109-24D 18-20 10-606014-201 10-597160-20D 10-597109-201 10-597109-20D 20-22 10-40792 10-597160-8D 10-40793 10-597109-8D 8 10-606014-41 10-597160-41D 10-597109-411 10-597109-41D 10-606014-321 10-597160-28D 10-606015-321 10-597109-28D 10-606014-381 10-597160-38D 10-597109-381 10-597109-38D 12-14 10-40564 10-597160-4D 10-40565 10-597109-4D 4 10-606014-58 10-597160-58D 10-597109-581 10-597109-58D 10-606014-331 10-597160-35D 10-597109-351 10-597109-35D 10-606014-44 10-597160-44D 10-606015-441 10-597109-44D 10 10-581806-000 10-597160-1D 10-581808-000 10-597159-1D 0 10-606014-341 10-597160-29D 10-597109-291 10-597109-29D 10-606014-351 10-597160-30D 10-606015-351 10-597109-30D 10-597276-48 10-597276-48D 10-606015-48 10-597109-48D 2/0 2/0 10-606015-47 10-597109-47D 4/0 4/0 10-597276-47 10-597276-47D Crimp Tools Positioner/ Die Set Locator/ Color 16-18-20 12-14 16S 14-16 Red 20-22 12-14 16 14-16 20-22 12 8 4 0 Daniels AF8 or Equivalent TH29-1 or Equivalent 10-12 Green 14-16-18 6 10-12 6 Pico 400BHD 8 0-2 Pico 414DA-8N Pico Pin - 4025 Socket - 4026 Pico 414DA-4N Pico 4043 Pico 414DA-0N Pico Pin - 4042-1 Socket - 4042 Pico 514DA2/0N Pico Pin - 6490 Pico 514DA4/0N Socket - 6491 4 See page 87 for further contact information applicable to both crimp and solder contacts. Additional contact variations including thermocouple and RADSOK power contacts are available; consult Amphenol, Sidney, NY for information. 86 Pin - Blue Socket - Green Pico 500 GT Connectors solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. Gold plated contacts are also available. (See how to order, pg. 88). Pin/ Socket Mating End Size Wire Barrel Size Allowable Wire Size 16 Short† 16 16 18 20 22 13 10 7.5 5 16 Long 16 16 18 20 22 13 10 7.5 5 12 12 12 14 23 17 8 8 8 10 46 33 4 4 4 6 80 60 0 0 0 1 2 150 125 100 Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket Pin Socket ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer’s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. † The 10SL, 14S and 16S connectors require short contacts. Table I MIL-SPEC CONTACT ARRANGEMENT SERVICE RATING MS Service Rating Table II ALTITUDE VOLTAGE DERATING** CHART Recommended Operating Voltage* at Sea Level DC Effective Creepage Mechanical Distance Spacing AC (RMS) Nom. Nom. Inst. 250 200 1/16 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. Test Current** Amps Nominal Distance Standard Sea Level Conditions Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) 550 400 325 260 800 600 450 360 2800 900 675 500 400 4500 3500 1000 750 550 440 5/16 5700 4500 1100 825 600 480 1 8500 7000 1300 975 700 560 Creepage Test Voltage AC (RMS) 1/16 1400 1000 1/8 2800 2000 1/8 3/16 3600 E 3/16 1/4 B 1/4 C 5/16 Airspace Inst. 1/32 A 1/16 D Pressure Altitude † 70,000 Feet Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) MS Service Rating Pressure Altitude † 50,000 Feet Minimum Flashover Voltage AC (RMS) † Not corrected for changes in density due to variations in temperature ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 87