IWPTU Series Industrial Wireless Pressure Transducer Pressure ranges from -15 to +5800 psi gauge Up to 2500ft line-of-site range (depending on receiver) Piezo-resistive thick film ceramic sensor with stainless steel body Five year battery life at 10 second transmission update rate Simple DIL switch pairing with the single or five channel receiver Single or five channel receivers available User-selectable transmission update rates User-selectable 1-5V or 4-20mA receiver outputs Receiver clean contacts provide process alarm functions DESCRIPTION The IWPTU Wireless Pressure Transducer is a cost effective replacement to a traditionally wired pressure transducer that offers the advantages of a low-cost installation in inaccessible and expensive installation environments. TYPICAL APPLICATIONS INCLUDE:- Simple cable replacement installation – dispense with expensive cable runs - Environmental monitoring – pumping stations, sewage plants, water treatment - Facilities management – boiler rooms, plant hydraulics, plant pneumatics - Asset monitoring – tanks farms, process plants, HVAC and building management - Service Contract – temporary installation for servicing and field trials Transmitter Pressure Ranges Nominal Pressure, Gauge, psi Compound range psi Permissible Overpressure psi Burst Pressure psi Transmitter Output *Transmission Frequency Transmit Power System Channel Antenna *Compliant with EN 300 328, V1.8.1 Cynergy3 Components Ltd. Ferndown Industrial Estate 7 Cobham Road Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] ISO9001 C E R T I F I E D It is easily paired to the compatible IWR family of single- or five-channel wireless receivers thus offering a “plug and play” solution to your pressure measurement applications. The instrument uses a piezo-resistive ceramic sensor mounted within a stainless steel housing giving excellent media compatibility for the harshest of applications. A line-of-sight range of up to 2500ft is possible depending on the wireless receiver used (refer to datasheets IWR-1 & IWR-5 for further information). Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate. 15 30 75 150 300 750 1500 -15 to 0 -15 to 30 -15 to 75 -15 to 1235 -15 to 285 -15 to 360 30 60 150 300 600 1500 3000 60 75 180 375 750 1800 3750 2.4 Ghz 18 dBm User selectable via DIL switch Integral 0dBi 3750 6000 6000 7500 9750 9750 System Performance Accuracy (Non-Linearity & Hysteresis) Setting Errors (offsets) Instrument Power Source Battery Type Battery Life Battery Shelf Life <±0.25% / FS (BFSL) Zero & Full Scale, <±0.5% / FS User replaceable Lithium C cell Five years at 10 second update rate 10 years www.cynergy3.com IWPTU 2016 © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. IWPTU Series Industrial Wireless Pressure Transducer Material Specifications Pressure Housing “O” ring seals Diaphragm Wireless Enclosure Material Weight **Installation position 303 Stainless Steel Viton Ceramic Al2O3 96% Plastic 310g including battery Any Temperatures & Thermal Effects Media Temperature Ambient Temperature Storage Temperature Thermal Zero Shift Thermal Span Shift -20ºC to +135ºC -20ºC to +80ºC -20ºC to +80ºC <±0.04% /FS/ºC <±0.02% /ºC typical Mechanical Stability See user manual Ordering Codes:Pressure Transducer Spare battery Single Channel Receiver Five Channel Receiver Five Channel Configuration Software See table below IBAT-1 IWR-1 IWR-5 IWR-Set ** Consult installation manual to ensure adequate signal path between transmitter and receiver Receiver Output Signals Outputs Single Channel Receiver Five Channel receiver Alarm Output ***Transmission Update Rate 1-5V or 4-20mA per channel IWR-1 (see data sheet) IWR-5 (see data sheet) 5 Amp rated changeover contacts 1, 5, 10 and 30 seconds *** Consult installation manual for set-up: - single channel system is DIL switch configurable - five channel system requires set-up using “IWR Set” user software *Download user configuration software here: - www.cyneregy3.com/???????? Part Number IWPTU-GP015-00 IWPTU-GP030-00 IWPTU-C0446-00 IWPTU-GP075-00 IWPTU-GP100-00 IWPTU-C0447-00 IWPTU-GP150-00 IWPTU-GP300-00 IWPTU-GP750-00 IWPTU-GP1K5-00 IWPTU-GP3K6-00 IWPTU-GP5K8-00 Pressure Rating Receiver Output 0-15 psi G 1-5Vdc or 4-20mA 0-30 psi G 1-5Vdc or 4-20mA -14.5 to +150 psi G1-5Vdc or 4-20mA 0-75 psi G 1-5Vdc or 4-20mA 0-100 psi G 1-5Vdc or 4-20mA -14.5 to +350 psi G1-5Vdc or 4-20mA 0-150 psi G 1-5Vdc or 4-20mA 0-300 psi G 1-5Vdc or 4-20mA 0-750 psi G 1-5Vdc or 4-20mA 0-1500 psi G 1-5Vdc or 4-20mA 0-3600 psi G 1-5Vdc or 4-20mA 0-5800 psi G 1-5Vdc or 4-20mA Mechanical Dimensions Cynergy3 Components Ltd. 7 Cobham Road Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:[email protected] 60 nominal Head rotatable by 180° 1/4" NPT ISO9001 C E R T I F I E D © 2016 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.