Designed for Rugged Excellence V1.0 IGAP-820 / IGAP-820+ Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000Base-T(X) Features High Speed Air Connectivity: WLAN interface support up to 1.3Gbps link speed Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported Support X-Roaming < 60 ms Support wireless load balance Support MAC Filter Support Long Distance Air Connectivity Provide Digital Input and Digital Output Support AP/Client Mode Support Multiple-SSID to 4 SSID Switch Mode Supported: Daisy Chain support to reduce usage of switch ports Wireless connecting status monitoring Secured Management by HTTPS Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper Rigid IP-30 housing design DIN-Rail and Wall-mount enabled Introduction IGAP-820 series is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 ac/g/n wireless module. It can be configured to operate in AP/Client mode. You are able to configure IGAP-820 / IGAP-820+ by WEB interface via LAN port or WLAN interface. IGAP-820 series provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-820+ also provides P.D. feature on ETH2 port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-820 series is one of the best communication solutions for wireless applications on the industrial network. * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Application In practical operation of wireless access point, Windows utility (Open-Vision) is supported. This utility is very helpful for you to search and configure IP of access point on the industrial network. In addition, the wireless access point support various kinds of operation modes include AP/ Client mode. You can build up the wireless network easily DI/DO Definition Digital Input Pin Definition PIN 1 2 3 4 5 Function DI1 DI2 DI3 DI4 COM Digital Output Pin Definition PIN 1 2 3 4 5 Function DO1 DO2 DO3 DO4 GND Dimension * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Specifications ORing WLAN Access Point IGAP-820 Model IGAP-820+ Physical Ports 10/100/1000 Base-T(X) Ports in RJ45 2 Auto MDI/MDIX 2(DI x 4 and DO x 4) : Dry Contact: 5-Pin Terminal Block On: short to GND, Off: open Wet Contact (DI to COM/GND): On: 0 to 3VDC, Off: 10 to 30VDC Antenna Connector 3 Present at ETH2 Fully compliant with IEEE 802.3af Power PoE P.D Port - Device specification Over load & short circuit protection Isolation Voltage: 1000 VDC min. Isolation Resistance : 108 ohms min WLAN interface Operating Mode AP/Client Antenna Connector Reverse SMA Female IEEE802.11a: OFDM IEEE802.11b: CCK/DQPSK/DBPSK Modulation IEEE802.11g: OFDM IEEE802.11n: BPSK, QPSK, 16-QAM, 64-QAM IEEE802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM America/FCC: 2.412~2.462 GHz Frequency Band 5.180~5.240 GHz & 5.745~5.825 GHz Europe CE/ETSI: 2.412~2.472 GHz 5.180~5.240 GHz 802.11b: 11, 5.5, 2, 1 Mbps; Transmission Rate 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: up to 450Mbps 802.11ac : up to 1.3Gbps 802.11a: 15dBm ± 2dBm@54Mbps 802.11b: 18dBm ± 2dBm@11Mbps 802.11g: 15dBm ± 2dBm@54Mbps Transmit Power 802.11gn HT20: 13dBm ± 2dBm @MCS7 802.11gn HT40: 13dBm ± 2dBm @MCS7 802.11an HT20: 13dBm ± 2dBm @MCS7 802.11an HT40: 12dBm ± 2dBm @MCS7 802.11ac VHT80: 10dBm ± 2dBm @MCS9 802.11a : -65dBm ± 2dBm@54Mbps 802.11b : -76dBm ± 2dBm@11Mbps 802.11g : -65dBm ± 2dBm@54Mbps Receiver Sensitivity 802.11gn HT20:-64dBm ± 2dBm@MCS7 802.11gn HT40:-61dBm ± 2dBm@MCS7 802.11an HT20:-64dBm ± 2dBm@MCS7 802.11an HT40:-61dBm ± 2dBm@MCS7 802.11ac VHT80:-51dBm ± 2dBm@MCS9 WEP: (64-bit ,128-bit key) Encryption Security WPA/WPA2 PSK :TKIP and AES encryption (802.11i) 802.1X/RADIUS Authentication supported Wireless Security SSID broadcast disable and enable Protocol Support Protocol ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP, RSTP LED Indicators 3 x LEDs, PWR1(2)(PoE)/Ready: Power Indicator Red On : Power is on and booting up Green On : Power is on and functioning Normal * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 10/100/1000Base-T(X) RJ45 Port 2 x LEDs, Green for port Link/Act at 1000Mbps Indicator Amber for port Link/Act at 100Mbps. Green Solid On: RF on, Blink: data transmitting WLAN LED Green for WLAN Strength: 1<25%, 2<50%, 3<75%, 4<100% Fault 1 x LED, Red for Ethernet link down or power down indicator Fault contact Relay Relay output to carry capacity of 1A at 24VDC Power Redundant Input Power Dual DC inputs. 12~48VDC on 6-pin terminal block Power Consumption (Typ.) 7.5W Overload Current Protection Present Reverse Polarity Protection Present on terminal block 8.5W Physical Characteristic Enclosure IP-30 Dimension (W x D x H) 74.3(W) x 109.2(D) x 153.6(H) mm (2.93 x 4.3 x 6.05 inch.) Weight (g) 1150 1155 Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -25 to 70oC (-13 to 158oF) Operating Humidity 5% to 95% Non-condensing Regulatory Approvals EMI FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EMS EN61000-4-8, EN61000-4-11 Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years Ordering Information IGAP- A B 0 C Code Definition Wireless Mode 10/100/1000Base-T(X) Port Number - 1: 802.11 b/g -"2": 2 ports PoE Identification -"+": PoE P.D. present at ETH2 - 2: 802.11 a - 3: 802.11 a/b/g Option - 4: 802.11 b/g/n - 5: 802.11 a/n - 6: 802.11 a/b/g/n - 8: 802.11 ac/g/n Model Name Description Available Model IGAP-820_US Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000 Base-T(X), US band * All specifications are subject to change without notice. Designed for Rugged Excellence V1.0 Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000 IGAP-820_EU Base-T(X), EU band Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000 IGAP-820+_US Base-T(X), 1-port PoE P.D, US band Industrial IEEE 802.11 ac/g/n wireless access point with 2x10/100/1000 IGAP-820+_EU Base-T(X), 1-port PoE P.D, EU band Packing List O IGAP-820/IGAP-820+ x 1 CD x 1 Quick Installation Guide x 1 Antenna x 3 Din-Rail Kit x 1 Wall-Mount Kit x 2 6-Pin Terminal Block x 1 5-Pin Terminal Block x 2 Dust Cover x 2 Optional Accessories O DR-45 series : 45 Watts power supply DR-75 series : 75 Watts power supply DR-120 series : 120 Watts power supply WLAN RF Antenna (Omni-directional) series RF Antenna Base (Magnetic) series RF Cable series * All specifications are subject to change without notice.