MOS FET Relays G3VM-41HR Low 30-mΩ ON Resistance. Higher power, 2.5-A switching with a 40-V load voltage, SOP package. • Continuous load current of 2.5 A (connection C = 5 A). • Dielectric strength of 1,500 Vrms between I/O. RoHS compliant ! Refer to “Common Precautions”. Note: ■ Application Examples The actual product is marked differently from the image shown here. • Broadband systems • Measurement devices • Data loggers • Industrial equipment ■ List of Models Contact form SPST-NO Note: Terminals Surface-mounting terminals Load voltage (peak value) (See note.) 40 V Model Number per stick G3VM-41HR 75 --- G3VM-41HR(TR) --- 2,500 The AC peak and DC value is given for the load voltage. ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-41HR 4.4±0.25 6.3±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 2.54±0.25 0.6±0.3 0.1±0.1 0.4±0.1 7.0±0.4 Weight: 0.13 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-41HR 6 5 4 1 2 3 ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-41HR 6 to 6.3 1.2 0.8 2.54 54 2.54 Number per tape G3VM-41HR G3VM-41HR ■ Absolute Maximum Ratings (Ta = 25°C) Item Input Output Symbol Rating Unit LED forward current IF 30 mA LED forward current reduction rate ∆ IF/°C −0.3 mA/°C LED reverse voltage VR 5 V Connection temperature Tj 125 °C Load voltage (AC peak/DC) VOFF 40 V Continuous load current IO 2.5 A Connection A Connection B Connection A Ta ≥ 25°C Connection A: AC peak/DC Connection B and C: DC Connection A 5 ∆ IIO/°C −33.3 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Connection Diagram 2.5 Connection C ON current reduction rate Note: Measurement Conditions mA/°C Ta ≥ 50°C t = 100 ms 1 6 2 5 3 4 1 6 2 5 3 4 1 6 2 5 3 4 Load AC or DC −33.3 Connection B −66.7 Connection C Pulse on current Iop 7.5 A Connection temperature Tj 125 °C Dielectric strength between input and output (See note 1.) VI-O 1,500 Vrms AC for 1 min Operating temperature Ta −40 to +85 °C With no icing or condensation Storage temperature Tstg −55 to +125 °C With no icing or condensation Soldering temperature (10 s) --- 260 °C Connection B Connection C 10 s Load DC Load DC ■ Electrical Characteristics (Ta = 25°C) Item Input Symbol LED forward voltage Output Minimum VF 1.18 Typical Maximum 1.33 1.48 Unit V Measurement conditions Note: IF = 10 mA Reverse current IR --- --- 10 µA VR = 5 V Capacity between terminals CT --- 70 --- pF V = 0, f = 1 MHz Trigger LED forward current IFT --- 0.4 3 mA IO = 100 mA Maximum resistance with output ON RON --- 0.03 0.06 Ω IF = 5 mA, IO = 2 A, t < 1S Connection B --- 0.015 0.03 Ω IF = 5 mA, IO = 2 A, t < 1S Connection C --- 0.008 --- Ω IF = 5 mA, IO = 4 A, t < 1S ILEAK --- --- 10 nA VOFF = 40 V CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V Connection A Current leakage when the relay is open Capacity between I/O terminals Insulation resistance RI-O 1,000 --- --- MΩ VI-O = 500 VDC, RoH ≤ 60% Turn-ON time tON --- 1.0 5.0 ms Turn-OFF time tOFF --- 0.15 1.0 ms IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) 2. Turn-ON and Turn-OFF Times IF 1 6 2 4 RL VDD VOUT IF VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Symbol Minimum Typical Maximum Unit Load voltage (AC peak/DC) VDD --- --- 40 V Operating LED forward current IF 5 7.5 20 mA Continuous load current (AC peak/DC) IO --- --- 2 A Operating temperature Ta −20 --- 65 °C ■ Engineering Data ■ Safety Precautions Load Current vs. Ambient Temperature Refer to “Common Precautions” for all G3VM models. Load current (A) G3VM-41HR 6 Connection C 5 4 3 Connection A, Connection B 2 1 0 −20 0 20 40 60 80 100 Ambient temperature (°C) 55