JSE08 Series DC-DC Converter 8 Watts xxx Series • Regulated Single & Dual Output • 2:1 Input Range • DIP16 Package • 1500 VDC Isolation • Operating Temperature -40 °C to +105 °C • ITE Safety Approvals • High Power Density • Metal Case • 3 Year Warranty Dimensions: JSE08: 0.94 x 0.54 x 0.31” (23.8 x 13.7 x 8.0 mm) Models & Ratings Input voltage Efficiency Model number 565 mA 680 µF 78% JSE0812S3V3 1600 mA 825 mA 680 µF 81% JSE0812S05 12 V 665 mA 790 mA 330 µF 84% JSE0812S12 15 V 535 mA 795 mA 330 µF 84% JSE0812S15 24 V 335 mA 790 mA 150 µF 85% JSE0812S24 ±12 V ±335 mA 790 mA ±150 µF 85% JSE0812D12 ±15 V ±265 mA 790 mA ±150 µF 84% JSE0812D15 3V3 1600 mA 280 mA 680 µF 78% JSE0824S3V3 Output current 3V3 1600 mA 5V 9-18V 18-36V 36-75V Input current(1) No load Full load Maximum capacitive load(2) Output voltage 10 mA 5V 1600 mA 405 mA 680 µF 82% JSE0824S05 12 V 665 mA 390 mA 330 µF 85% JSE0824S12 15 V 535 mA 395 mA 330 µF 85% JSE0824S15 24 V 335 mA 390 mA 150 µF 86% JSE0824S24 ±12 V ±335 mA 395 mA ±150 µF 85% JSE0824D12 ±15 V ±265 mA 385 mA ±150 µF 86% JSE0824D15 3V3 1600 mA 140 mA 680 µF 78% JSE0848S3V3 10 mA 5V 1600 mA 205 mA 680 µF 81% JSE0848S05 12 V 665 mA 195 mA 330 µF 85% JSE0848S12 15 V 535 mA 195 mA 330 µF 85% JSE0848S15 24 V 335 mA 195 mA 150 µF 86% JSE0848S24 ±12 V ±335 mA 195 mA ±150 µF 86% JSE0848D12 ±15 V ±265 mA 195 mA ±150 µF 86% JSE0848D15 8 mA Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. Mechanical Details Bottom View 16 10 Pin Connections 0.31 (8.0) 8 0.54 (13.7) 7 0.40 (10.16) 1 0.15 (3.8) 9 0.60 (15.24) 0.94 (23.8) 1 0.10 (2.54) 1.77 [0.07] ø0.02 (0.5) 0.12 (3.0) www.xppower.com Pin 1 7 8 9 10 16 Single -Vin No Connection No Connection +Vout -Vout +Vin Dual -Vin No Connection Common +Vout -Vout +Vin JSE08 Series DC-DC Converter Input Characteristic Input Voltage Range Minimum Typical Notes & Conditions Maximum Units 9.0 18 VDC 12 V nominal 18.0 36 VDC 24 V nominal 36.0 75 VDC 48 V nominal Input Filter Internal Pi type ON at >9V, OFF at <8 V 12 V models Undervoltage Lockout ON at >18V, OFF at <16 V 24 V models ON at >36V, OFF at <34 V 48 V models 12 V models 25 Input Surge VDC for 1 s 50 100 24 V models 48 V models Output Characteristic Minimum Output Voltage 3.3 Typical Initial Set Accuracy Output Voltage Balance ±1.0 Maximum Units Notes & Conditions 30 VDC See Models and Ratings table ±2.0 % ±2.0 % For dual output with balanced laods A No minimum load required From minimum to maximum input at full load Minimum Load At full load Line Regulation ±0.2 ±0.8 % Load Regulation ±0.5 ±1.0 % From 0 to full load ±5.0 % On dual output models when one load is varied between 25% and 100% and other is fixed at 100% 5 % deviation Ripple & Noise 55 mV pk-pk Overload Protection 150 % Cross Regulation Transient Response 3 Short Circuit Protection Recovery within 1% in less than 250 µs for a 25% load change. 20 MHz bandwidth. Measured using 0.47 µF ceramic capacitor. Continuous Trip & Restart (Hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Maximum Units General Characteristic Minimum Typical Efficiency Isolation: Input to Output Isolation Resistance 85 % 1500/1800 500 Switching Frequency 370 Power Density 60 s/1 s pF kHz At 500 VDC Ω W/in3 50.8 Mean Time Between Failure Weight See Models and Ratings table VDC 109 Isolation Capacitance Notes & Conditions 1 MHrs 0.013 (6.1) lb (g) MIL-HDBK-217F, +25 °C GB Environmental Characteristic Minimum Operating Temperature -40 Storage Temperature -50 Typical Case Temperature Humidity Maximum Units Notes & Conditions +105 °C See Derating Curve. +125 °C +105 °C 95 %RH Cooling Case Flammability Non-condensing Natural convection UL 94V-0 Rated EMC: Emissions Phenomenon Standard Test Level Conducted EN55022 Class A www.xppower.com Notes & Conditions No filter required 2 JSE08 Series DC-DC Converter EMC: Immunity Test Level Criteria ESD EN61000-4-2 ±8 kV air discharge, ±6 kV contact A Radiated EN61000-4-3 10 V/m A EFT/Burst EN61000-4-4 ±2 kV A With external capacitor, suggested part is CHEMI-CON KY 330µF/100V Surge EN61000-4-5 ±1 kV A With external capacitor, suggested part is CHEMI-CON KY 330µF/100V Conducted EN61000-4-6 10 V rms A Phenomenon Standard Notes & Conditions Safety Approvals Safety Agency Safety Standard CB Report IEC60950-1 Notes & Conditions Information Technology UL UL/cUL60950-1 Information Technology Mechanical Details 8 Bottom View 16 10 0.54 (13.7) 7 0.40 (10.16) 1 0.31 (8.0) Pin Connections 0.15 (3.8) 9 ø0.02 (0.5) 0.60 (15.24) 0.94 (23.8) 1.77 [0.07] 0.12 (3.0) 0.10 (2.54) Pin 1 7 8 9 10 16 Single -Vin No Connection No Connection +Vout -Vout +Vin Dual -Vin No Connection Common +Vout -Vout +Vin Notes 1. All dimensions are in inches (mm) 2. Weight: 0.013 lbs (6.1 g) approx. 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) 0 Application Notes 0 Derating Curve Output Power (%) 100 50 0 -40 70 80 105 Ambient Temperature (°C) 3 www.xppower.com 14 Mar 16