Round Through-Hole LED Lamp (3 mm) OVLBx4C7 Series • • • • High brightness with well-defined spatial radiation patterns UV-resistant epoxy lens Lead-frame material is iron alloy with tin plated leads No stand-offs Each OVLBx4C7 series device is a high-intensity LED mounted in a clear plastic T-1 package. The LED provides a well-defined and even emission pattern. Its UV-resistant epoxy lens makes this device an optimal solution for outdoor applications. Applications • Pedestrian signals • Signage and architectural lighting • Backlighting • Automotive • Outdoor/indoor displays Part Number OVLBB4C7 Material Emitted Color Intensity Typ. mcd Lens Color Blue 1800 Clear Green 8400 Clear Red 3700 Clear Yellow 3700 Clear InGaN OVLBG4C7 OVLBR4C7 OVLBY4C7 AllnGaP RoHS General tolerance +/- .25mm unless specified Dimensions are in Inches [MM] DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 03/2013 Page 1 of 9 Round Through-Hole LED (3 mm) OVLBx4C7 Series Absolute Maximum Ratings (TA = 25o C unless otherwise noted) Storage Temperature Range -40 ~ +100 °C Operating Temperature Range -40 ~ +100 °C Reverse Voltage 5 V Max (Device not designed for reverse voltage applications) Continuous Forward Current (Design of heat dissipation should be considered) Peak Forward Current (10% Duty Cycle, 1 kHz) Power Dissipation Blue, Green 25 mA Red, Yellow 50 mA Blue, Green 100 mA Red, Yellow 100 mA Blue, Green 100 mW Red, Yellow Current Linearity vs Ambient Temperature 120 mW Blue, Green -0.29 mA/° C Red, Yellow -0.72 mA/° C LED Junction Temperature 125° C Electrostatic Discharge Classification (JEDEC-JESD22-A114F) Class 1C 260° C / 3 seconds Lead Soldering Temperature (4 mm away from the base of the epoxy bulb) Electrical Characteristics (TA = 25o C unless otherwise noted) PARAMETER SYMBOL IV Luminous Intensity COLOR MIN TYP MAX Blue 1135 1800 ---- Green 4360 8400 ---- Red 2225 3700 ---- 2225 3700 ---- 2.6 3.2 4.0 1.8 2.0 2.4 Blue ---- ---- Green ---- ---- Red ---- ---- Yellow Blue VF Forward Voltage Green Red Yellow IR Reverse Current λD Dominant Wavelength Yellow ---- ---- Blue 460 470 475 Green 519 525 531 Red 620 623 630 585 589 595 ---- 45 ---- Yellow 2Θ½H-H 50% Power Angle 10 UNITS CONDITIONS mcd IF = 20 mA V IF = 20 mA µA VR = 5 V nm IF = 20 mA deg IF = 20 mA OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 2 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com Round Through-Hole LED (3 mm) OVLBx4C7 Series Standard Bins LEDs are sorted to luminous intensity (IV), forward voltage (VF) and dominant wavelength (nm) bins listed below. Each bag consists of a single intensity bin, single voltage bin and a single color bin. Orders are filled using all intensity and color bins listed in the following tables. Optek will not accept orders for single intensity bins, single voltage bins or single color bins. Luminous Intensity (IV ) @ 20mA Forward Voltage (VF ) Blue: OVLBB4C7 Blue: OVLBB4C7 & Green: OVLBG4C7 IV Code Min (mcd) Max (mcd) 0S 1,135 1,590 0T 1,590 2,225 0U 2,225 0V 3,115 3,115 4,360 Green: OVLBG4C7 IV Code Min (mcd) Max (mcd) 0W 4,360 6,105 0X 6,105 8,550 0Y 8,550 11,970 0Z 11,970 16,758 Luminous Intensity (IV ) @ 20mA IV Code 0U Min (mcd) Min Max A 2.6 2.8 B 2.8 3.0 C 3.0 3.2 D 3.2 3.4 E 3.4 3.6 F 3.6 3.8 G 3.8 4.0 Forward Voltage (VF ) 3,115 0V 3,115 4,360 0W 4,360 6,105 Yellow: OVLBY4C7 IV Code Min (mcd) nm Code Min Max BC 460 465 BD 465 470 BE 470 475 Green: OVLBG4C7 nm Code Min Max FB 519 523 FC 523 527 FD 527 531 Dominant Wavelength (nm) Red: OVLBR4C7 Red: OVLBR4C7 & Yellow: OVLBY4C7 Max (mcd) 2,225 Blue: OVLBB4C7 VF Code Red: OVLBR4C7 Dominant Wavelength (nm) VF Code Min Max A 1.8 2.0 B 2.0 2.2 C 2.2 2.4 nm Code Min Max RA 620 625 RB 625 630 Yellow: OVLBY4C7 nm Code Min Max Max (mcd) YC 585 587 0U 2,225 3,115 YD 587 589 0V 3,115 4,360 YE 589 591 0W 4,360 6,105 YF 591 593 YG 593 595 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 03/2013 Page 3 of 9 Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (BLUE) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 4 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (GREEN) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 03/2013 Page 5 of 9 Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (RED) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 6 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com Round Through-Hole LED (3 mm) OVLBx4C7 Series Typical Electro-Optical Characteristics Curves (YELLOW) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 03/2013 Page 7 of 9 Round Through-Hole LED (3 mm) OVLBx4C7 Series Beam Pattern: (Blue) and (Green) (Red) and (Yellow) Packaging: 500 pcs per bulk bag with desiccant Desiccant Barcode Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue C 03/2013 Page 8 of 9 Phone: (972) 323-2200 or (800) 341-4747 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 FAX: (972) 323-2396 [email protected] www.optekinc.com Round Through-Hole LED (3 mm) OVLBx4C7 Series Reliability Test LED lamps are checked by reliability tests based on MIL standards. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue C 03/2013 Page 9 of 9