LED-50W Series– Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <20.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.50 Amps max Maximum Power: 50W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < _ 20% @ Full Load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Protection: utput Over-Voltage, Output Over-Current, and O Output Short Circuit Protection with Auto Recovery Environmental Specifications Minimum Starting Temp: -30ºC Maximum Case Temp. 90°C (3330mA and 15V, 88°C) (4200mA and 12V, 78°C) • Total Power: 50 Watts • Input Voltage: 100-277 Vac Nom. • UL Dry & Damp Location Rated • IP66 • High Power Factor • UL8750 • UL Sign Components Manual (S.A.M. Models) Constant Current - Product Specifications Model Number Output Current Output Voltage (mA ±3%) Range (Vdc) Max. Output Power (W) Typical Efficiency LED50W-142-C0350-XX 350 47-142 49.7 89% LED50W-111-C0450-XX 450 37-111 49.9 89% LED50W-072-C0530-XX 530 24-72 38.1 88% LED50W-072-C0700-XX 700 24-72 50 88% LED50W-060-C0830-XX 830 20-60 49.8 88% Storage Temperature: -40ºC to +85ºC Humidity: 5% to 95% LED50W-048-C1050-XX 1050 16-48 50 88% Cooling: Convection LED50W-042-C1190-XX 1190 14-42 50 87% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED50W-040-C1250-XX 1250 13-40 50 87% Sound Rating: Class A LED50W-036-C1400-XX 1400 12-36 50 87% MTBF: 74,000 Hours at full load and 40ºC ambient conditions 4 per MIL-217F Notice 2 LED50W-029-C1750-XX 1750 9-29 50 87% LED50W-024-C2100-XX 2100 8-24 50 87% LED50W-020-C2500-XX 2500 7-20 50 87% LED50W-018-C2800-XX 2800 6-18 50 86% LED50W-015-C3330-XX 3330 5-15 49.9 85% LED50W-012-C4200-XX 4200 4-12 50 84% EMC: FCC 47CFR Part 15 Class B compliant -XX indicates dimming options are available. See options at left. Blank = fixed current output Constant Voltage - Product Specifications Model Number LED50W-012 Ordering Options: -D: -PD: 0-10V & Resistance dimmable version comes with an extra two wires +Purple/-Gray on the output side. -D 0-10V Dimming is compatible with most quality 0-10V wall dimmers. See page 3 for additional specifications. PWM Dimmable version comes with an extra two wires +Purple/-Gray on the output side. PD PWM version is PWM Dimmable via a positive 10% to 100% Duty Cycle, 200Hz to 1KHz, 0-10V Pulse. See page 4 for additional specifications. Sign Components Manual E332160 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Specifications subject to change without notice. LED50W-015 • Output Voltage Output Current (Vdc ±5%) Range (mA) Max. Output Power (W) Typical Efficiency 12 1050-4200 50 84% 15 833-3330 49.9 85% LED50W-018 18 700-2800 50 86% LED50W-020 20 625-2500 50 87% LED50W-024 LED50W-029 • 24 525-2100 50 87% 29 438-1750 50 87% LED50W-036 36 350-1400 50 87% LED50W-040 40 313-1250 50 87% LED50W-042 42 298-1190 50 87% LED50W-048 48 263-1050 50 88% LED50W-060 60 208-830 49.8 88% LED50W-072 72 175-700 50 88% LED50W-111 111 113-450 49.9 89% LED50W-142 142 88-350 49.7 89% Class 2: • Indicates S.A.M. US/Canada US Only Rev 9-11-15 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED50W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 4 Dimensions - IN [mm] Tc = 90°C max OUTPUT Red (+) Blue (-) Dimming Purple (+) Gray (-) INPUT White (N) Black (L) WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. Power Factor / Load 1.00 0.90 45% 0.80 40% 0.70 35% 30% 0.50 25% 120Vac 277Vac 0.40 0.30 15% 0.10 10% 60% 70% 80% 90% Load Lifetime / Case Temperature 120Vac 277Vac 20% 0.20 0.00 50% 100% 0% 50% 60% 100% (Full Load @ 120Vac) 70% 80% Load 90% 100% Typical Efficiency / Load 90Vac 120Vac 230Vac 277Vac Typical 95% Efficiency Lifetime (kHrs) THD PF 0.60 125 115 105 90 85 75 65 55 45 35 25 15 5 0 50 THD / Load 50% 90% 85% 80% 75% 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) 90 Note: Life calculations are based on reliability with confidence using a 90% confidence level and <5% failure rate. At a confidence level of 90% it is expected that <5% of the parts will fail at the rated life provided. (Failure is defined as a driver drifting outside specification, rather than fail to operate) 70% 33% 45% 58% 60% 83% 92% Normalized Output Voltage 100% UL Conditions of Acceptability See website for additional information Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED50W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 4 “-D” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V ——- 2 mA +15 V Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Purple Wire Typical Dimming Circuit Dim (+) Purple LED50W-XX-CXXXX-D IP710 Wall Dimmer Dim (-) Gray (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Control Voltage Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V 7V Purple-to-Gray Voltage (Vdc) 8V 9V 10V Notes: 1. 2. 3. 4. 0-10V dimmable version comes with an extra two wires +Purple/-Gray on the output side. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent 0-10V dimmable version is not intended to dim below about 5% @ 0V or 10% @ 1.0V 0-10V dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED50W Series SSL Solutions Faster Than The Speed Of Light® Pg 4 of 4 “-PD” Option: PWM Dimming Parameters Absolute Maximum Voltage Range on PWM Input (Purple Wire) Input LOW Level Voltage Range (Purple Wire) Input HIGH Level Voltage Range (Purple Wire) Sink Current into PWM Input (Purple Wire) PWM Input Signal Frequency PWM Input Signal Positive Duty Cycle Minimum Typical Maximum -2.0V -2.0 +9.0 0mA 200Hz 0% 10V 0V 10V ——10-90% +28V +7.5V 28V 1.2mA 1000Hz 100% PWM Positive Dimming Typical Circuit PWM (+) Purple LED50W-XX-CXXXX-PD PWM In PWM (-) Gray Output Current / Positive Duty Cycle Output Current % 100 90 80 70 60 50 40 30 20 10 0 0% 10% 20% 30% 40% 50% 60% Positive Duty Cycle 70% 80% 90% 100% Notes: 1. PWM Dimmable version comes with an extra 2 wires +Purple/-Gray on the output side. 2. Below 10% Duty cycle proper dimming operation is not assured. Unit is not intended to turn off at <10% Duty Cycle. 3. PWM dimmable version output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com