BriLux 1W Light Source BTP-53XXCH-XX-XX Package Dimension Features Highest Lumen Per Watt Long Operational Life More Energy Efficient IC Compatible Low DC Voltage Superior ESD Protection Smallest Footprint Applications Accent Lighting Automotive Exterior/Interior Light High Power Back Light Reading Light Marine/Miner’s Lighting Portable Lighting 0.01 inch Tolerance: ± mm Unit: ± 0.25 Optical Characteristics at Ta=25ºC PART NUMBER LED CHIP MATERIAL Lens Color Wavelength/CCT Luminous VIEW ANGLE Flux @350mA(lm) 2θ1/2 Range (nm/K) Drive Voltage Min/Max Typ. Typ. (deg) BTP-53NRCH-XX-15 AlInGaP Water Clear 620~635 2.85V 15 lm 60 BTP-53AMCH-XX-15 AlInGaP Water Clear 600~620 2.85V 15 lm 60 BTP-53YECH-XX-15 AlInGaP Water Clear 585~595 2.85V 15 lm 60 BTP-53DBCH-XX-05 AlInGaN Water Clear 450~460 3.40V 5 lm 60 BTP-53BLCH-XX-06 AlInGaN Water Clear 460~475 3.40V 6 lm 60 BTP-53GBCH-XX-08 AlInGaN Water Clear 475~485 3.40V 8 lm 60 BTP-53BGCH-XX-15 AlInGaN Water Clear 495~510 3.40V 15 lm 60 BTP-53GMCH-XX-20 AlInGaN Water Clear 510~520 3.40V 20 lm 60 BTP-53PGCH-XX-25 AlInGaN Water Clear 520~530 3.40V 25 lm 60 BTP-53WHCH-XX-20 AlInGaN Water Clear 5000K~8000K 3.40V 20 lm 60 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Absolute Maximum Ratings at Ta=25ºC Parameter White/Green/Cyan/Blue Red/Amber/Yellow 1000 450 350 150 Peak Pulsed Forward Current (mA) 500 300 Average Forward Current (mA) 350 150 Reverse Voltage (V) 5 5 Reverse Current (uA) 10 10 120 120 100 100 Storage Temperature (°C) -40 to +100 -40 to +100 Soldering Temperature (°C)[4] 260 for 5 seconds max 260 for 5 seconds max Power Dissipation (mW) [1] DC Forward Current (mA) LED Junction Temperature (°C) Al-PCB Temperature (°C) [3] Application Notes: 1. Proper forward current must be observed to maintain the junction temperature below maximum rating 2. Although all products listed are class one ESD protection (+/- 1KV by HBM mode), care must be fully taken when handling products 3. Measured at back of aluminium PCB without additional heat sink. We recommend mounting BriLux light source directly to heat sink with fasteners for best performance. 4. Measured at contact terminals. 5. Specification is subjected to change without notice. DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Typical Electro-Optical Characteristics Curves at Ta=25ºC (Red/Yellow/Blue/Green) DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com BriLux 1W Light Source BTP-53XXCH-XX-XX Typical Electro-Optical Characteristics Curves at Ta=25ºC (White) White BriLux DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com