rev.2.0 18.11.15 CW405-05 • • • • • Violet Laser Diode Module 405 nm, <5 mW Automatic Power Control Wide Input Voltage Range (3-5 VDC) Fix Focus Acryl Lens Description CW405-05 is a compact size fix collimated laser diode module with a typical emission wavelength of 405 nm, and an optical output power of <5 mW. It features automatic power control (APC) driving electronics for stable operation, and supports a wide input voltage range (3-5 VDC). CW405-05 comes equipped with a coaxial power connector. A matching power supply and suitable heat sink is optionally available for quick setup and convenient operation (see page 3 for details). Maximum Ratings (T CASE = 25°C) Min. Values Max. Operating temperature + 10 + 50 °C Storage temperature - 20 + 80 °C Parameter Unit Electro-Optical Characteristics (T Parameter Peak Wavelength CASE = 25°C) Min. Values Typ. Max. 400 405 410 nm 5 mW Radiated Power Beam diameter at aperture Unit 2x4 mm Beam divergence 1.0 mrad Operating Current 70 mA Supply Voltage 3 5 Material body aluminium, black anodized Material lens acryl Ø 12 x 20 (40) Dimensions Connector MTTF www.roithner-laser.com VDC mm IEC 60130-10, Type A, 5.5/2.1 mm 5000 h 1 Ø5.0 Ø12.0 Outline Dimensions 19.5 20.0 ~ 300 all dimensions in mm Electrical Connection (IEC 60130-10, Type A, 5.5/2.1 mm) GND + VDC Precautions Static Electricity: Precautions against electrostatic discharge (ESD) must be taken when handling or operating the module. Surge voltage or electrostatic discharge can result in complete failure of the laser diode. Heat Sinking: In order to maintain lifetime and stability of the laser diode it is essential to provide efficient heat management. For long time stable operation proper contact between laser module and heat sink is mandatory. Safety: This laser module emits highly concentrated visible light which can be hazardous to the human eye and skin. It is classified as CLASS 3R laser product according to IEC 60825-1 and 21 CFR Part 1040.10 Safety Standards. Actual laser light emitted and precautions necessary strongly depend on mode of operation. www.roithner-laser.com 2 Accessories Laser Power Supply LPS51 • • • • • • 110-230 VAC universal input voltage Small ripple (<80 mV) AC Europlug (CEE7/16) ON/OFF switch IEC 60130-10 Type A connector Output: 5 VDC, max. 1 A • • • • Aluminium, black anodized 50 x 50 x 34 mm 114 g Clamping mechanism Power Supply LPS31 Heat Sink SQ50x34 © All Rights Reserved The above specifications are for reference purpose only and subjected to change without prior notice www.roithner-laser.com 3