General Purpose Snap Action Switch GP Series Features Ultra-small travel differential Wide variety of actuators Mechanical life tested to over 20 million cycles Screw or solder terminals available Current rating up to 20 amps VDE standard on 15A switches with screw terminals Electrical Ratings Switch Series UL508 VDE Approval to EN60947 GP*B 20A 250VAC N/A GP*C 15A 250VAC 15A 250VAC (Note: Only screw terminals have VDE approval) Technical Specifications Material Specifications Temperature Rating: 0°C + 55°C Max UL - 5°C to + 40°C VDE Case / Cover Spring Phenolic Beryllium Copper Dielectric Strength 1000 VAC 50/60 Hz for 1 minute Contacts: Silver Alloy Insulation Resistance 100M ohms min at 500 VDC Initial Contact Resistance 15m ohms max Terminals: Screw Terminals: Brass Solder Terminals: Copper Alloy Contacts: Silver Alloy US Holes: Mounting: Metric Holes: UL File Number: #6-32 Fastener with 6.0 In-Lb Max Torque M4 Fastener with 6.0 In-Lb Max Torque E184788 Lever Actuator: Nickel Plated Steel RoHS Compliant Specifications subject to change without notice VDE for 15 amp with screw terminals only General Purpose Snap Action Switch GP Series Terminal Types Mounting Holes U.S. Version Screw Terminal Solder Terminal Metric Version Dimensions inches(mm) Note: GP Series switches are available with screw or solder terminals and with U.S. or metric holes For solder terminals, replace the “T’ in the third position of the part number with an ‘S’ (e.g. GPSCNA11 was GPTCNA11) Ŧ For metric holes, replace the ‘1’ in the seventh position with a ‘0’ (e.g. GPTCNA01 was GPTCNA11) Specifications subject to change without notice Contact Call, fax or visit our Website for more information. ZF Electronics Corporation 11200 88th Avenue Pleasant Prairie, WI 53158 Phone: 262.942.6500 Web: www.cherrycorp.com Email: [email protected] Fax: 262.942.6566 The manufacturer accepts no liability for errors or non-availability, and reserves the right to change specifications without prior notice. Technical data relates to product specifications only. Features may differ from those described. Only drawings combined with product specifications shall be deemed binding. © 2007 ZF Electronics Corporation Last Updated: 030912