SNAP SWITCHES DJ sub-subminiature switch Technical specifications Sealed switch up to protection IP67 Contact configuration S.P.D.T. Contact gap < 3 mm Suitable for actuation at angles of up to 40 °C depending on slide partner material, etc. Switching voltage max. 12 V DC Easy installation thanks to connector pins and fastening nut up to 60 V on request Smallest dimensions Switched current 0,005 to 2 A DC Models available for up to 85 °C operating temperature Operating force max. 120 cN Nominal currents 5 mA to 2 A at 12 V DC Total travel ca. 2,0 mm Mechanical life min. 500.000 operations Electrical life (max. load) min. 100.000 operations Ambient temperature – 40 to +85 °C Materials Base PBT / PES Cover PBT + ASA Actuator POM Sealing gasket SI (VMQ) Terminals CuZn (silver-plated) Contacts AuAg (Crosspoint) Degree of protection (switch interior) IP67 For detailed information and the layout of the details described above, please do not hesitate to ask for our technical specifications and drawing. 46 Features High contact stability with AuAg crosspoint contacts Mechanical operating life min. 500.000 actuations Many connection possibilities Dimensions in mm Rest position max. 4,1 Operating point 3,45 ±0,2 End position min. 2,05 Terminals Solder terminal 2,5 x 0,5 mm PCB terminal 0,7 x 0,5 mm, straight Drilling pattern for PCB terminal 0,7 x 0,5 mm Side definition LH-side RH-side 47