Key Features Protection from electrical shock. Conforms to UL 94-V1 Protects against ingress of dust and moisture. Fits most ranges of Schaffner IEC Inlet Filters Insulating Boots For use with IEC Inlet Filters There are a full range of insulating boots available from Schaffner Ltd that provide a physical cover for the exposed terminals on the back of IEC Inlet Filters. These boots fit the simplest non-fused and unswitched style up to the fully fused and switched IEC filtered inlet. The boots are made from a durable black PVC material that conforms to UL94-V1 flammability requirements. The boots slip easily over the back of the filter and reduce the risk of electrical shock to maintenance personnel whilst protecting the filter from environmental hazard such as the ingress of dust and moisture. Part Number Dimensions (mm) Filter Application IEC With fuse IEC With switch/fuse Voltage selector A B C D E F IEC IB1 – 06 55 9 40 6 20 30 YES IB2 – 06 60 9 45 6 30 35 IB3 – 06 85 9 75 6 30 60 YES IB3 - 10 80 13 60 10 30 60 YES Material thickness : 1mm approx… Operating temperature range : -10°C to 60°C All dimensions are nominal Schaffner Limited, Unit 5 Ashville Way, Molly Millar’s Lane, Wokingham, Berkshire RG41 2PL T 00 44 118 977 0070 F 00 44 118 979 2969 E [email protected] W www.schaffner.com YES Reference Guide to Insulating Boots IEC Inlets IB1 – 06 FN 321, 329, 9222, 9223 IEC Inlets with Fuses IB2 – 06 FN 261, 9260 IEC Inlets with Fuses and Switches or Voltage Selector IB3 – 06 FN 390, 393, 394, 1393, 1394 IEC Inlets with Fuses and Switches or Voltage Selector IB3 – 10 FN 280, 281, 282, 283, 284, 285, 286