Hybrid Aluminum Electrolytic Capacitors NSPE-T Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • EXTENDED LOAD LIFE AT HIGH TEMPERATURE (1,500 ~ 3,000 HOURS @ +125°C) • HIGH VOLTAGE RATINGS (25 ~ 125VDC) • LOW ESR AND HIGH RIPPLE CURRENT RATINGS Expanded • 6.3x6.3mm ~ 10x10.8mm CASE SIZES • REFLOW SOLDERING RATED TO +260°C (+250°C 80V & 125V) Values & 125V CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 25 ~ 125Vdc 6.8 ~ 330μF -55 ~ +125°C ±20% (M) Less than 0.05CV or 100μA whichever is greater W.V. (Vdc) 25 35 40 50 63 80 100 Working and Surge Voltage Ratings S.V. (Vdc) 32 44 50 63 79 100 125 0.16 Tan δ @ 120Hz/20°C Z -55°C/Z +20°C 1 ~ 2.5 Impedance Ratio Z +125°C/Z +20°C 0.6 ~ 1.0 W.V. (Vdc) 25 35 40 50 63 80 100 φ6.3mm φ6.3X6.3 = 1,500 hrs, φ6.3X8= 2000 hrs. Case Dia. 3000 hrs. φ8 & 10mm Load Life Test @ 125°C Capacitance Change Within ±30% of initial measured value and Rated Voltage Less than 200% of specified max. value Tan δ and ESR Leakage Current Less than specified max. value ESR Less than 200% of specified max. value Hot Plate at +250°C for 30 seconds with electrodes facing downward Capacitance Change Within ±10% of the initial measured value Resistance to Soldering Heat Dissipation Factor Less than the initial limit Leakage Current Less then the initial limit 125 157 125 STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER NSPE-T470M25V6.3X6.3NBF Cap. Working Case Size Max. Tan δ Max. ESR (mΩ) Max. Ripple Current (mA rms) Load Life (μF) Voltage (D X L) mm 120Hz/20°C AT 100kHz/20°C AT 100KHz/125°C Hours (+125°C) 47 6.3X6.3 0.16 60 890 1500 NSPE-T680M25V6.3X8NBF 68 NSPE-T151M25V8X10.8NBF 150 6.3X8 0.16 45 980 2000 8X10.8 0.16 27 1330 3000 NSPE-T271M25V10X10.8NBF NSPE-T331M25V10X12.8NBF 270 10X10.8 0.16 22 1520 3000 330 10X12.8 0.16 16 1740 NSPE-T270M35V6.3X6.3NBF 3000 27 6.3X6.3 0.16 100 760 1500 NSPE-T470M35V6.3X8NBF 47 NSPE-T101M35V8X10.8NBF 100 NSPE-T151M35V10X10.8NBF NSPE-T221M35V10X12.8NBF 25 6.3X8 0.16 60 910 2000 8X10.8 0.16 30 1260 3000 150 10X10.8 0.16 23 1480 3000 220 10X12.8 0.16 17 1700 3000 NSPE-T180M40V6.3X6.3NBF 18 6.3X6.3 0.16 110 720 1500 NSPE-T270M40V6.3X8NBF 27 6.3X8 0.16 70 870 2000 35 NSPE-T560M40V8X10.8NBF 56 8X10.8 0.16 32 1220 3000 NSPE-T101M40V10X10.8NBF 100 40 10X10.8 0.16 24 1440 3000 NSPE-T121M40V10X12.8NBF 120 10X12.8 0.16 18 1650 3000 NSPE-T100M50V6.3X6.3NBF 10 6.3X6.3 0.16 120 690 1500 NSPE-T150M50V6.3X8NBF 15 6.3X8 0.16 80 840 2000 NSPE-T330M50V8X10.8NBF 33 8X10.8 0.16 35 1170 3000 NSPE-T560M50V10X10.8NBF 56 50 10X10.8 0.16 25 1390 3000 NSPE-T820M50V10X12.8NBF 82 10X12.8 0.16 19 1590 3000 For Automotive Applications See Part Numbering System New Values ® 34 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-T Series STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) Cap. Working Case Size Max. Tan δ Max. ESR (mΩ) Max. Ripple Current (mA rms) Load Life (μF) Voltage (D X L) mm 120Hz/20°C AT 100kHz/20°C AT 100KHz/125°C Hours (+125°C) 6.8 6.3X6.3 0.16 150 670 1500 PART NUMBER NSPE-T6R8M63V6.3X6.3NBF NSPE-T100M63V6.3X8NBF 10 6.3X8 0.16 100 740 2000 NSPE-T220M63V8X10.8NBF 22 NSPE-T330M63V8X10.8NBF 33 8X10.8 0.16 40 1090 3000 8X10.8 0.16 40 1090 NSPE-T330M63V10X10.8NBF 3000 33 10X10.8 0.16 30 1260 3000 NSPE-T470M63V10X10.8NBF 47 10X10.8 0.16 30 1260 3000 NSPE-T560M63V10X12.8NBF 56 10X12.8 0.16 22 1440 3000 NSPE-T120M80V10X10.8LBF 12 10X10.8 0.16 70 900 3000 NSPE-T150M80V10X10.8LBF 15 10X10.8 0.16 70 900 3000 NSPE-T180M80V10X12.8LBF 18 10X12.8 0.16 50 1100 3000 NSPE-T100M100V10X10.8LBF 10 NSPE-T120M100V10X10.8LBF 12 NPSE-T150M100V10X12.8LBF 15 63 80 100 10X10.8 0.16 80 870 3000 10X10.8 0.16 80 870 3000 10X12.8 0.16 60 1000 3000 NSPE-T100M125V10X10.8LBF 10 125 10X10.8 For Automotive Applications See Part Numbering System 0.16 90 750 3000 New Values RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency 6.8 ~ 33μF 47 ~ 330μF 100Hz 0.05 0.10 1KHz 0.32 0.35 10KHz 0.67 0.70 100KHz 1.0 1.0 DIMENSIONS (mm) Case Size 6.3x6.3 6.3x8 8x10.8 10x10.8 10x12.8 Dφ ±0.5 6.3 6.3 8.0 10 10 L max. 6.3 8.0 10.8 10.8 12.8 A, B ±0.2 6.6 6.6 8.3 10.3 10.3 W 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 + Dφ I I ±0.2 2.5 2.5 2.9 3.2 3.2 I Part Marking P ±0.2 2.2 2.2 3.2 4.6 4.6 Series Code Lot Code T__ 6R8 63V - W A L 0.3mm max. Capacitance Value Voltage P B PART NUMBER SYSTEM NSPE-T 220 M 63V 8x10.8 N B Y F Series ® RoHS Compliant B=Sn-Bi Finish & 13" Reel, L=Sn-Bi Finish & 15" Reel Reflow Temp. Code (N=+260°C, L=+250°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros, “R” indicates decimal for values under 10μF Optional: Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 35 Hybrid Aluminum Electrolytic Capacitors LAND PATTERN DIM. (mm) Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE* Case Dia. 6.3 8 10 Peak Temperature (260°C/5 seconds) 260 230 200 Time Above 230°C (40 seconds max.) 150 Time Above 200°C (80 seconds max.) 100 NSPE-T Series A 3.6 4.1 4.4 B 1.8 2.1 2.5 P 1.8 2.8 4.3 + - Preheat - 120 seconds max. (+150°C ~ +190°C) B 50 Time (Seconds) A PEAK TEMPERATURE AND DURATION Time Above +200°C Rated Voltage/Diameter Time Above +217°C Time Above +230°C 25V ~ 63V / 6.3mm ~ 10mm 100 sec. max. 80 sec. max. 40 sec. max. 80 ~ 125V / 10mm *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. P A Peak Temperature +260°C (5 sec. max.) +250°C (5 sec. max.) TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 4 + 0.1 3. Connection: Maximum 3 connections (slices) per reel. D ±0.1 7.5 7.5 11.5 11.5 11.5 P ±0.1 12.0 12.0 16.0 16.0 16.0 T ±0.2 6.5 8.2 11.0 11.0 13.3 t max. 0.6 0.6 0.6 0.6 0.6 6.3x6.3 6.3x8 8x10.5 10x10.5 10x12.8 W ±1.0 18 18 26 26 26 + A P Feeding T 2mm ± 0.5mm REEL DIMENSIONS (mm) Case Size - B C ±0.3 16.0 16.0 24.0 24.0 24.0 D B ±0.5 7.0 7.0 8.7 10.7 10.7 t Qty per Reel 13" (330mm) 15" (380mm) 800 1000 500 900 300 500 300 500 300 400 φ13mm ± 0.5mm φ50mm min. 6.3x6.3 6.3x8 8x10.8 10x10.8 10x12.8 A ±0.5 7.0 7.0 8.7 10.7 10.7 1.75 ± C Case Size 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 φ21mm ± 0.8mm φ330mm ± 2.0mm or φ380mm ± 2.0mm W 3mm ® 36 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com