52 DIP REED RELAY • • • • • Dual - in - line Package Epoxy Moulded Relay Sensitive Direct PCB type JSS Approved Maxm. Voltage : 100V DC 28 V DC Maxm. Current Carrying : 1A 1A Maxm. Current Switching : 0.25 A 0.25A Dielectric with standing voltage Across contacts (VRMS) : 250, Contacts to coil (VRMS) : 500, 150 500 Capacitance Across contacts (Typical) : 0.2 PF 3.5 PF Contacts to coil (Typical) : 2.0 PF 6.0 PF Insulation Resistance(Ohms) : 10 Operate Time (milli sec.) (Including Bounce) Release time (milli sec.) When Suppressor diode used (milli sec.) 9 3 x 10 : 0.5 : 0.35 1.5. 1.5. : 0.50 1.7 8 7.5 4.0 0.5 200 80 12 15 8.0 1.2 500 450 900 700 15 19 11.5 1.5 24 32 18.0 2.4 2100 1200 CIRCUIT DIAGRAMS Contact Resistance : 150m Ohms Max. (Initial) Life Expectancy : Full load - 10 Ops 6 7 Signal load - 10 Ops 0 05 0 1 14 +2 13 3 12 : -40 C to +85 C 4 11 Shock : 50Gs. 8 Ms ± 1Ms 5 10 : 10-2000 HZ 20Gs. -6 9 7 8 OR 3.2 MM (0.125”) Contact Arrangement 1A - 1 Form A 1C - 1 Form C 1 14 13 3 12 4 11 Typical applications 5 10 Telecommunication Equipments, Office Automation, Security Equipments, Measuring Instruments. -6 9 7 8 Duration : 5 Sec. Max. 1 Form C All dimensions are in mm. Specifications subject to change without notice. Tolerance unless otherwise specified is ± 10% - XXX 0 - without clamping diode 1 - with clamping diode (Available only for 8 pin version) Nominal voltage (Ref. Coil data) 14 13 12 11 10 9 8 1 2 3 4 5 6 7 20.00 Max 7.2 3.20 0.50 15.24 0.254 7.6 0.40 For 8 pin version omit terminals 3,4,5,10,11 & 12 DRILLING PATTERN +2 Recommended Soldering 1 DIMENSIONS Ø 1.0 ± 0.05 7.60 0 05 - Specialities If any 4 - 8 pin version 7 - 14 pin version Recommended Soldering : 270 C Max. - Product Series 1 Form A Displacement Temperature 1A (View From Top of the Relay) Temperature Range Vibration 4 7.5 3W 52 - 2.54 : 10W, Coil Resistance Ohms ± 10% 1 Form C : 1 Form A, 1 Form C Maxm. Wattage HOW TO ORDER Coil Resistance Ohms ± 10% 1 Form A Contact Rating Drop-out Voltage VDC (Min) : 1 Form A, 1 Form C Pick-up Voltage VDC (Max) Contact Arrangement Maximum Voltage VDC COIL DATA Nominal Voltage VDC SPECIFICATIONS 2.54 ± 0.05