PMBR5H150SS \ SR5H15 ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS Voltage 150 V 5A Current Features Plastic package has Underwriters Laboratory DO-201AD Flammability Classification 94V-O. Flame Retardant Epoxy Molding Compound. Low power loss, high efficiency. High current capability High junction temperature capability Lead free in compliance with EU RoHS 2011/65/EU directive Green molding compound as per IEC61249 Std. . (Halogen Free) (SMB) SMB Mechanical Data Case: SMB, DO-201AD package Terminals: solder plated, solderable per MIL-STD-750,Method 2026 SMB Weight: 0.0032 ounces, 0.092 grams. DO-201AD Weight: 0.0403 ounces, 1.142 grams. Marking: Part number 150V SMB SR5H15 DO-201AD MBR5H150SS o Maximum Ratings And Electrical Characteristics (TA=25 C unless otherwise noted) PARAMETER SYMBOL 150V UNIT Maximum repetitive peak reverse voltage VRRM 150 V Maximum rms voltage VRMS 105 V VR 150 V IF(AV) 5 A IFSM 150 A VF 0.85 V 0.5 A 1 mA Maximum dc blocking voltage Maximum average forward rectified current Peak forward surge current : 8.3ms single half sinewave superimposed on rated load Maximum forward voltage at 5A Maximum dc reverse current at rated dc blocking voltage Typical thermal resistance o TJ =25 C o TJ =125 C SMB(Note 1) DO-201AD(Note 2) Operating junction temperature range Storage temperature range IR 18 RθJC 17 o C/W TJ -55 to +175 o TSTG -55 to +175 o C C 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, with 100cm copper pad area 2. The testing condition of the thermal resistance (junction to Case) is based on 10 mm lead length between two 10cm x 10cm × 0.5mm copper pad February 2,2015-REV.00 Page 1 IF, Forward Current (A) 6 5 4 3 2 1 0 0 25 50 75 100 125 150 175 200 TC, Case Temperature (°C) 1000 100 10 1 1 10 100 VR, Reverse Bias Voltage (V) Fig.2 Typical Junction Capacitance 100 10 10 TJ = 125°C TJ = 150°C 1 TJ = 75°C 0.1 0.01 TJ = 25°C IF, Forward Current (A) IR, Reverse Current (mA) Fig.1 Forward Current Derating Curve CJ, Junction Capacitance (pF) PMBR5H150SS \ SR5H15 TJ = 150°C 1 TJ = 125°C TJ = 75°C 0.1 TJ = 25°C 0.001 10 20 30 40 50 60 70 80 90 100 0.01 0 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics February 2,2015-REV.00 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Page 2 PMBR5H150SS \ SR5H15 MOUNTING PAD LAYOUT ORDER INFORMATION ˙Packing information T/R – 3K per 13" plastic Reel T/R – 0.5K per 7" plastic Reel February 2,2015-REV.00 Page 3 1.0(25.4)MIN. 0.052(1.3) 0.048(1.2) 0.185(4.70) 0.160(4.06) 0.050(1.27) 0.030(0.76) 0.220(5.59) 0.200(5.08) February 2,2015-REV.00 1.0(25.4)MIN. 0.096(2.44) 0.083(2.13) 0.012(0.305) 0.006(0.152) 0.375(9.5) 0.285(7.2) 0.083(2.11) 0.075(1.91) 0.155(3.94) 0.130(3.30) PMBR5H150SS \ SR5H15 0.210(5.3) 0.188(4.8) Page 4 PMBR5H150SS \ SR5H15 Part No_packing code_Version SR5H15_R1_00001 SR5H15_R2_00001 MBR5H150SS_AY_00001 MBR5H150SS_AY_10001 MBR5H150SS_B0_00001 MBR5H150SS_B0_10001 MBR5H150SS_R2_00001 MBR5H150SS_R2_10001 For example : RB500V-40_R2_00001 ˙Serial number ˙ ˙Version code means HF Part No. ˙Packing size code means 13" ˙Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CATHODE UP (PBCU) U FORMING F PANASERT T/B CATHODE DOWN (PBCD) D February 2,2015-REV.00 Page 5 PMBR5H150SS \ SR5H15 Disclaimer ● Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. ● Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. ● Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ● Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ● Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ● The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. ● Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. February 2,2015-REV.00 Page 6