ON NCV5661MN15T2G Low output voltage, ultra-fast 1.0 a low dropout linear regulator with enable Datasheet

NCP5661, NCV5661
Low Output Voltage,
Ultra-Fast 1.0 A Low Dropout
Linear Regulator with Enable
The NCP5661/NCV5661 is a high performance, low dropout linear
regulator designed for high power applications that require up to 1.0 A
current. It is offered in both fixed and adjustable output versions. With
output voltages as low as 0.9 V and ultra−fast response times for load
transients, the NCP5661/NCV5661 also provides additional features
such as Enable and Error Flag (for the fixed output version),
increasing the utility of these devices. A thermally robust, 5 pin DPAK
or DFN 3x3.3 mm, combined with an architecture that offers low
ground current (independent of load), provides for a superior
high−current LDO solution.
Features












Ultra−Fast Transient Response (Settling Time: 1−3 ms)
Low Noise Without Bypass Capacitor (26 mVrms)
Low Ground Current Independent of Load (3.0 mA Maximum)
Fixed/Adjustable Output Voltage Versions
Enable Function
Error Flag (Fixed Output Version)
Current Limit Protection
Thermal Protection
0.9 V Reference Voltage for Ultra−Low Output Operation
Power Supply Rejection Ratio > 65 dB
NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
These are Pb−Free Devices
Applications






Servers
ASIC Power Supplies
Post Regulation for Power Supplies
Constant Current Source
Networking Equipment
Gaming and STB Modules
http://onsemi.com
MARKING
DIAGRAMS
1
5
DPAK−5 CENTER
LEAD CROP
CASE 175AA
NCP5661
NCV5661
5661xG
ALYWW
V5661xG
ALYWW
NCP5661
1
DFN6
MN SUFFIX
CASE 506AX
1
661x
AYWWG
G
NCV5661
1
V661
zzz
AYWWG
G
x
= A for Adjustable Version
B for Fixed 1.2 V
C for Fixed 3.3 V
D for Fixed 1.5 V
E for Fixed 1.8 V
F for Fixed 2.5 V
G for Fixed 2.8 V
H for Fixed 3.0 V
zzz
= 12 for Fixed 1.2 V
15 for Fixed 1.5 V
18 for Fixed 1.8 V
25 for Fixed 2.5 V
28 for Fixed 2.8 V
30 for Fixed 3.0 V
33 for Fixed 3.3 V
ADJ for Adjustable Version
A
= Assembly Location
L
= Wafer Lot
Y
= Year
WW = Work Week
G
= Pb−Free
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
 Semiconductor Components Industries, LLC, 2013
May, 2013 − Rev. 17
1
Publication Order Number:
NCP5661/D
NCP5661, NCV5661
PIN FUNCTION DESCRIPTION
Pin
Adj/Fixed
DFN6
Pin
Adj/Fixed
DPAK−5
Pin Name
1
1
Enable
2,3
2
Vin
4, EPAD
3, TAB
Ground
5
4
Vout
6
5
Adj
(Adjustable Version)
This pin is connected to the resistor divider network and programs the output voltage.
6
5
Error Flag
(Fixed Version)
An Error Flag is triggered when the output voltage is out of regulation excluding transient signals that may occur. Requires a pullup resistor f 100 kW.
Description
This pin allows for on/off control of the regulator. To disable the device, connect to
Ground. If this function is not in use, connect to Vin.
Positive Power Supply Input Voltage
Power Supply Ground
Regulated Output Voltage
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Voltage
Vin
18
V
Output Pin Voltage
Vout
−0.3 to Vin +0.3
V
Adjust Pin Voltage
Vadj
−0.3 to Vin +0.3
V
Enable Pin Voltage
Ven
−0.3 to Vin +0.3
V
Error Flag Voltage
Vef
−0.3 to Vin +0.3
V
Error Flag Current
Ief
3.0
mA
Thermal Characteristics, DPAK−5 (Note 1)
Thermal Resistance, Junction−to−Air
Thermal Resistance, Junction−to−Case
RJA
RJC
100
8.0
Thermal Characteristics, DFN6 (Note 2)
Thermal Resistance, Junction−to−Air
Thermal Resistance, Junction−to−Lead (Note 3)
RJA
RJL
82
18
Operating Junction Temperature Range
TJ
−40 to +150
C
Storage Temperature Range
Tstg
−55 to +150
C
C/W
C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
NOTE: This device series contains ESD protection and exceeds the following tests:
Human Body Model (HBM) JESD 22−A114−B
Machine Model (MM) JESD 22−A115−A.
The maximum package power dissipation is:
*T
T
J(max)
A
P +
D
R
qJA
The bipolar process employed for this IC is fully characterized and rated for reliable 18 V VCCmax operation. To avoid damaging
the part or degrading it’s reliability, power dissipation transients should be limited to under 20 W for DPAK.
For open−circuit to short−circuit transient,
PDTransient = VCCmax * ISC.
1. 1 oz copper, 0.26 in2 copper area (minimum pad)
2. 1 oz copper, 1 in2 copper area
3. Lead 2
http://onsemi.com
2
NCP5661, NCV5661
ELECTRICAL CHARACTERISTICS
(Vin − Vout = 1.5 V, for typical values TJ = 25C, for min/max values TJ = −40C to 125C, Cin = Cout = 150 mF unless otherwise noted.)
Symbol
Min
Typ
Max
Unit
Input Voltage
Vin
2.0
−
9.0
V
Output Noise Voltage (f = 10 Hz to 100 kHz)
Vn
−
26
−
mVrms
−1%
−1.5%
−2%
−
0.9
−
+1%
+1.5%
+2%
Characteristic
ADJUSTABLE OUTPUT VERSION
Output Voltage Accuracy
TJ = 25C (Iout = 10 mA to 1.0 A)
TJ = −20 to +125C (Iout = 10 mA to 1.0 A)
TJ = −40 to +150C (Iout = 10 mA to 1.0 A)
Vout
Adjustable Pin Input Current
Iadj
−
40
−
nA
Line Regulation (Iout = 10 mA, Vout+1.5 V < Vin < 7.0 V)
REGline
−
0.03
−
%
Load Regulation (10 mA < Iout < 1.0 A)
REGload
−
0.03
−
%
Dropout Voltage (Iout = 1.0 A)
VDO
−
1.0
1.3
V
Peak Output Current Limit
Iout
1.0
−
−
A
Internal Current Limitation
Ilim
−
1.5
−
A
Ripple Rejection (120 Hz)
Ripple Rejection (1.0 kHz)
RR
−
−
70
65
−
−
dB
TSHD
−
160
−
C
Iq
Iqds
−
−
1.3
10
3.0
300
mA
mA
1.3
−
−
−
−
0.3
−
−
0.5
0.5
−
−
Thermal Shutdown (Guaranteed by Design)
Ground Current
Iout = 1.0 A
Disabled State
Enable Input Threshold Voltage
V
Ven
Voltage Increasing, On State, Logic High
Voltage Decreasing, Off State, Logic Low
Enable Input Current
V
Ien
Enable Pin Voltage = 0.3 Vmax
Enable Pin Voltage = 1.3 Vmin
http://onsemi.com
3
mA
NCP5661, NCV5661
ELECTRICAL CHARACTERISTICS
(Vin − Vout = 1.5 V, for typical values TJ = 25C, for min/max values TJ = −40C to 125C, Cin = Cout = 150 mF unless otherwise noted.)
Symbol
Min
Typ
Max
Unit
Input Voltage
Vin
2.0
−
9.0
V
Output Noise Voltage (Vout = 0.9 V)
Vn
−
26
−
mVrms
−1%
−1.5%
−2%
−
Vout
−
+1%
+1.5%
+2%
Characteristic
FIXED OUTPUT VOLTAGE
Output Voltage Accuracy
TJ = 25C (Iout = 10 mA to 1.0 A)
TJ = −20 to +125C (Iout = 10 mA to 1.0 A)
TJ = −40 to +150C (Iout = 10 mA to 1.0 A)
Vout
V
Line Regulation (Iout = 10 mA, Vout+1.5 V < Vin < 7.0 V)
REGline
−
0.03
−
%
Load Regulation (10 mA < Iout < 1.0 A)
REGload
−
0.2
−
%
Dropout Voltage (Iout = 1.0 A)
VDO
−
1.0
1.3
V
Peak Output Current Limit
Iout
1.0
−
−
A
Internal Current Limitation
Ilim
−
1.5
−
A
Ripple Rejection (120 Hz)
Ripple Rejection (1.0 kHz)
RR
−
−
70
65
−
−
dB
TSHD
−
160
−
C
Iq
Iqds
−
−
1.3
30
3.0
300
mA
mA
1.3
−
−
−
−
0.3
−
−
0.5
0.5
−
−
88
88
88
88
88
88
90
92
92
92
92
92
92
94
97
97
97
97
97
97
97
Thermal Shutdown (Guaranteed by Design)
Ground Current
Iout = 1.0 A
Disabled State
Enable Input Threshold Voltage
Ven
Voltage Increasing, On State, Logic High
Voltage Decreasing, Off State, Logic Low
Enable Input Current
V
Ien
Enable Pin Voltage = 0.3 Vmax
Enable Pin Voltage = 1.3 Vmin
Error Flag (Fixed Output)
1.2 V Output
1.5 V Output
1.8 V Output
2.5 V Output
2.8 V Output
3.0 V Output
3.3 V Output
Veflt
mA
% of Vout
Error Flag Output Low Voltage Saturation (Ief = 1.0 mA)
Vefdo
−
200
−
mV
Error Flag Leakage
Iefleak
−
1.0
−
mA
Tef
−
50
−
ms
Error Flag Blanking Time (Note 4)
4. Error Flag Blanking Time
http://onsemi.com
4
NCP5661, NCV5661
Vin
IN
ON
Cin
EN
Enable
Block
Voltage
Reference
Block
OFF
Vref = 0.9 V
R3
Vout
Output
Stage
ADJ
R4
R1
CC *
Cout
R2
GND
R1 + R2
ǒVVout
* 1Ǔ
ref
GND
*CC = 5.0 to 200 pF
Figure 1. Typical Schematic, Adjustable Output Version
Vin
IN
ON
Cin
Voltage
Reference
Block
Enable
Block
Vref = 0.9 V
R3
EN
Rflag = 100 kW
OFF
Vout
Output
Stage
Cc
R1
Cout
R4
R2
Error
Flag
GND
GND
Figure 2. Typical Schematic, Fixed Output Version
http://onsemi.com
5
EF
NCP5661, NCV5661
1.00
VDO, DROPOUT VOLTAGE (V)
VDO, DROPOUT VOLTAGE (V)
1.2
1.0
0.8
0.6
0.4
0.2
0
−40
−20
0
20
40
60
80 100 120
TJ, JUNCTION TEMPERATURE (C)
0.95
0.90
0.85
0.80
Vout = 2.5 V Adjustable
Cin = 150 mF
Cout = 10 to 150 mF
TJ = 25C
0.75
0.70
0.0
140
3.0
ISC, SHORT CIRCUIT LIMIT (A)
IGND, GROUND CURRENT (mA)
0.4
0.5
0.6
0.7
0.8
0.9
1.0
2.0
2.5
2.0
1.5
1.0
0.5
−20
0
20
40
60
80
100
120
1.8
1.6
1.4
1.2
1.0
−40
140
TJ, JUNCTION TEMPERATURE (C)
−20
0
20
40
60
80
100
120
140
TJ, JUNCTION TEMPERATURE (C)
Figure 5. Ground Current vs. Temperature
Figure 6. Short Circuit Current Limit vs.
Temperature
0.95
0.900
Vout, OUTPUT VOLTAGE (V)
Vout, OUTPUT VOLTAGE (V)
0.3
Figure 4. Dropout Voltage vs. Output Current
3.5
0.90
0.85
0.80
Iout = 10 mA
Cin = 150 mF
Cout = 1.0 to 150 mF
TJ = 25C
0.75
0.70
1.0
0.2
Iout, OUTPUT CURRENT (A)
Figure 3. Dropout Voltage vs. Temperature
0
−40
0.1
2.0
3.0
4.0
5.0
6.0
7.0
8.0
0.898
0.896
0.892
0.890
0.0
9.0
Vin, INPUT VOLTAGE (V)
Figure 7. Output Voltage vs. Input Voltage
Vin = 3.3 V
Iout = 1.0 A maximum
Cin = 150 mF
Cout = 1.0 to 150 mF
TJ = 25C
0.894
0.2
0.4
0.6
0.8
Iout, OUTPUT CURRENT (A)
1.0
Figure 8. Output Voltage vs. Output Load Current
http://onsemi.com
6
NCP5661, NCV5661
0.9
90
OUTPUT CURRENT (A)
0.8
RR, RIPPLE REJECTION (dB)
TA = 25C
L = 25 mm Copper
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
80
70
Iout = 10 mA
60
50
40
Vin = 4.0 V
Vout = 0.9 V
Cin = 0 mF
Cout = 1.0 mF
TJ = 25C
30
20
10
0
0
2
4
6
8
10
12
14
16
20
0
1
10
INPUT−OUTPUT VOLTAGE DIFFERENTIAL (V)
90
90
NOISE DENSITY (nVrms/ǨHz)
100
80
70
60
Vin = 3.3 V
Vout = 0.9 V
Iout = 10 mA
Cin = 150 mF
Cout = 150 mF
TJ = 25C
40
30
20
10
0
Start: 100 Hz
80
70
60
50
Vin = 3.3 V
Vout = 0.9 V
Iout = 1.0 A
Cin = 150 mF
Cout = 150 mF
TJ = 25C
40
30
20
10
0
Stop: 100 kHz
Start: 100 Hz
Stop: 100 kHz
F, FREQUENCY (kHz)
F, FREQUENCY (kHz)
Figure 11. Noise Density vs. Frequency
Figure 12. Noise Density vs. Frequency
1000
1000
100
100
10
1.0
100 mF
150 mF
0.10
0.01
0
Unstable
Unstable
ESR (W)
ESR (W)
150 mF
10 mF
1000
Figure 10. Ripple Rejection vs. Frequency
100
50
100
F, FREQUENCY (kHz)
Figure 9. Output Current vs. Input−Output
Voltage Differential
NOISE DENSITY (nVrms/ǨHz)
Iout = 1.0 A
10
100 mF
1.0
10 mF
Stable
0.10
Stable
100 200 300 400 500 600 700 800 900 1000
0.01
0
100 200 300 400 500 600 700 800 900 1000
OUTPUT CURRENT (mA)
OUTPUT CURRENT (mA)
Figure 13. 1.2 Volt Output Stability with Output
Capacitor ESR
Figure 14. 3.3 Volt Output Stability with Output
Capacitor ESR
http://onsemi.com
7
NCP5661, NCV5661
Iout = 10 mA to 1.0 A
Iout
0.5 A/Div
Iout
0.5 A/Div
Vout
10 mV/Div
Vout
10 mV/Div
Vin = 4.0 V
Vout = 0.9 V
Cin = 150 mF
Cout = 150 mF
TJ = 25C
Vin = 4.0 V
Vout = 0.9 V
Cin = 150 mF
Cout = 150 mF
TJ = 25C
Iout = 1.0 A to 10 mA
TIME (1.0 ms/Div)
TIME (1.0 ms/Div)
Figure 15. Load Transient Response
Figure 16. Load Transient Response
APPLICATION INFORMATION
The NCP5661 is a high performance low dropout 1.0 A
linear regulator suitable for high power applications,
featuring an ultra−fast response time and low noise without
a bypass capacitor. It is offered in both fixed and adjustable
output versions with voltages as low as 0.9 V. Additional
features, such as Enable and Error Flag (fixed output
version) increase the utility of the NCP5661. It is thermally
robust and includes the safety features necessary during a
fault condition, which provide for an attractive high current
LDO solution for server, ASIC power supplies, networking
equipment applications, and many others.
adjustable pin current is typically 40 nA. A resistor divider
network, R1 and R2, is calculated using the following
formula:
R1 + R2
Input
Cin
ON
OFF
Enable
ǒVVout
* 1Ǔ
ref
Vout
Vin
NCP5661
EN
Input Capacitor
Vout = 0.9 V
Output
Cout
ADJ
GND
The recommended input capacitor value is a 150 mF
OSCON with an Equivalent Series Resistance (ESR) of
50 mW. It is especially required if the power source is
located more than a few inches from the NCP5661. This
capacitor will reduce device sensitivity and enhance the
output transient response time. The PCB layout is very
important and in order to obtain the optimal solution, the Vin
and GND traces should be sufficiently wide to minimize
noise and unstable operation.
Figure 17. To achieve the minimum output voltage,
ADJ to Vout has to be connected together
Current Limit Operation
As the peak output current increases beyond its limitation,
the device is internally clampled to 1.5 A, thus causing the
output voltage to decrease and go out of regulation. This
allows the device never to exceed the maximum power
dissipation.
Output Capacitor
Error Flag Operation
Proper output capacitor selection is required to maintain
stability. The NCP5661 is guaranteed to be stable at an
output capacitance of, Cout > 10 mF with an ESR between
50 mW and 300 mW over the output current range of 10 mA
to 1.0 A. For PCB layout considerations, place the
recommended ceramic capacitor close to the output pin and
keep the leads short. This should help ensure ultra−fast
transient response times.
The Error Flag pin on the NCP5661 will produce a logic
Low when it drops below the nominal output voltage. Refer
to the electrical characteristics for the threshold values at
which point the Error Flag goes Low. When the NCP5661
is above the nominal output voltage, the Error Flag will
remain at logic High.
The external pullup resistor needs to be connected
between Vin (Pin 1) and the Error Flag pin (Pin 5). A resistor
of approximately 100 kW is recommended to minimize the
current consumption. No pullup resistor is required if the
Error Flag output is not being used.
Adjustable Output Operation
The application circuit for the adjustable output version is
shown in Figure 1. The reference voltage is 0.9 V and the
http://onsemi.com
8
NCP5661, NCV5661
390
340
qJA (C/W)
290
240
190
1 oz Copper
140
2 oz Copper
90
40
0
100
200
300
400
COPPER AREA
500
600
700
(mm2)
Figure 18. DFN6 Thermal Resistance vs. Copper Area
NCP5661 Evaluation Board
Figure 19. Test Board used for Evaluation
http://onsemi.com
9
NCP5661, NCV5661
ORDERING INFORMATION
Device
NCP5661DTADJRKG
Nominal Output Voltage
Fixed, 1.2 V
(Pb−Free)
NCP5661DT18RKG
Fixed, 1.8 V
(Pb−Free)
NCP5661DT25RKG
Fixed, 2.5 V
(Pb−Free)
NCP5661DT33RKG
Fixed, 3.3 V
(Pb−Free)
DPAK
2500/Tape & Reel
DFN6
3x3.3 mm
3000/Tape & Reel
Adj
(Pb−Free)
NCV5661DT12RKG*
Fixed, 1.2 V
(Pb−Free)
NCV5661DT18RKG*
Fixed, 1.8 V
(Pb−Free)
NCV5661DT33RKG*
Fixed, 3.3 V
(Pb−Free)
NCP5661MNADJT2G
Adj
(Pb−Free)
NCP5661MN12T2G
Fixed, 1.2 V
(Pb−Free)
NCP5661MN15T2G
Fixed, 1.5 V
(Pb−Free)
NCP5661MN18T2G
Fixed, 1.8 V
(Pb−Free)
NCP5661MN25T2G
Fixed, 2.5 V
(Pb−Free)
NCP5661MN28T2G
Fixed, 2.8 V
(Pb−Free)
NCP5661MN30T2G
Fixed, 3.0 V
(Pb−Free)
NCP5661MN33T2G
Fixed, 3.3 V
(Pb−Free)
NCV5661MNADJT2G*
Shipping†
Adj
(Pb−Free)
NCP5661DT12RKG
NCV5661DTADJRKG*
Package
Adj
(Pb−Free)
NCV5661MN12T2G*
Fixed, 1.2 V
(Pb−Free)
NCV5661MN15T2G*
Fixed, 1.5 V
(Pb−Free)
NCV5661MN18T2G*
Fixed, 1.8 V
(Pb−Free)
NCV5661MN25T2G*
Fixed, 2.5 V
(Pb−Free)
NCV5661MN28T2G*
Fixed, 2.8 V
(Pb−Free)
NCV5661MN30T2G*
Fixed, 3.0 V
(Pb−Free)
NCV5661MN33T2G*
Fixed, 3.3 V
(Pb−Free)
NOTE: Additional Fix output voltages are available upon request.
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP
Capable
http://onsemi.com
10
NCP5661, NCV5661
PACKAGE DIMENSIONS
DFN6 3x3.3 MM, 0.95 PITCH
CASE 506AX
ISSUE O
A
D
PIN 1
REFERENCE
2X
0.15 C
2X
ÇÇÇ
ÇÇÇ
ÇÇÇ
ÇÇÇ
0.15 C
NOTES:
1. DIMENSIONS AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND 0.30 mm
FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED PAD
AS WELL AS THE TERMINALS.
B
E
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
L1
TOP VIEW
0.10 C
A
6X
0.08 C
(A3)
SIDE VIEW
D2
6X
C
A1
SEATING
PLANE
SOLDERING FOOTPRINT*
3.60
4X
1.35
e
L
1
E2
6X
L1
6
6X
0.50
1
K
3
MILLIMETERS
MIN
NOM MAX
0.80
−−−
0.90
0.00
−−−
0.05
0.20 REF
0.30
−−−
0.40
3.00 BSC
1.90
−−−
2.10
3.30 BSC
1.10
−−−
1.30
0.95 BSC
0.20
−−−
−−−
0.40
−−−
0.60
0.00
−−−
0.15
2.15
0.95
PITCH
4
6X
BOTTOM VIEW
b
6X
(NOTE 3)
0.83
DIMENSIONS: MILLIMETERS
0.10 C A B
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
0.05 C
http://onsemi.com
11
NCP5661, NCV5661
PACKAGE DIMENSIONS
DPAK−5
CENTER LEAD CROP
CASE 175AA
ISSUE A
−T−
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
SEATING
PLANE
E
R
R1
Z
A
S
DIM
A
B
C
D
E
F
G
H
J
K
L
R
R1
S
U
V
Z
1 2 3 4 5
U
K
F
J
L
H
D
G
5 PL
0.13 (0.005)
M
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.020 0.028
0.018 0.023
0.024 0.032
0.180 BSC
0.034 0.040
0.018 0.023
0.102 0.114
0.045 BSC
0.170 0.190
0.185 0.210
0.025 0.040
0.020
−−−
0.035 0.050
0.155 0.170
MILLIMETERS
MIN
MAX
5.97
6.22
6.35
6.73
2.19
2.38
0.51
0.71
0.46
0.58
0.61
0.81
4.56 BSC
0.87
1.01
0.46
0.58
2.60
2.89
1.14 BSC
4.32
4.83
4.70
5.33
0.63
1.01
0.51
−−−
0.89
1.27
3.93
4.32
T
SOLDERING FOOTPRINT*
6.4
0.252
2.2
0.086
0.34 5.36
0.013 0.217
5.8
0.228
10.6
0.417
0.8
0.031
SCALE 4:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy
and soldering details, please download the
ON Semiconductor Soldering and Mounting
Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
12
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCP5661/D
Similar pages