DG60 ultra miniature pcb automotive relay • Ultra miniature - only 14.3 x 7.5 x 13.8mm and extremely light weight • Single and Twin relays • Ultra Low voltage operate version • Reflow Solder compatible version • RoHS Compliant Contacts Contact number & arrangement SPDT (1 Form C); 2 x SPDT (2 x 1 Form C) Contact material AgSnO2 Max. switching voltage Min. switching current / voltage DC 16VDC (consult factory for 24VDC) 1A/6VDC Rated load DC1 25A/14VDC Max. switching current DC1 30A Max. continuous current DC1 25A (1hr @ 20°C) Max. switching power 480W Initial resistance 100mΩ, max. at 0.1A/6VDC Coil Rated voltage DC 12V Must release voltage DC 1.0V Operating range of supply voltage Rated power consumption See coil tables 1 & 2 DC 0.64W (table 1) / 0.8W (table 2) Insulation Insulation resistance 100MΩ at 500VDC, 50%RH Coil insulation UL Class F - standard; UL Class H - reflow compatible version Dielectric strength coil to contact 1000Vrms, 50Hz, 1min contact to contact 500Vrms, 50Hz, 1min General Data Operating time ms ≤10 Release time (typical) ms ≤5 Electrical Life ops 1 x 105 (see Note 2) Mechanical life ops 1 x 106 at 300 ops/min Dimensions Weight L x W x H 14.3 x 7.5 x 13.8mm (SPDT); 14.3 x 15.7 x 13.8mm (2 x SPDT) 4g approx. (SPDT); 8g approx. (2 x SPDT) Ambient temperature storage -40 to 155°C operating -40 to 85°C (-40 to 105°C Reflow version - see Note 3) Shock resistance 98m/s2 11ms Vibration resistance 43.1 m/s2 10 - 500Hz Page 1 of 3 Ref: DG60 030116JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE. DG60 ultra miniature pcb automotive relay Coil Data (640mW - standard version) Table 1 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must operate voltage max. (VDC) Must release voltage min. (VDC) Max allowable voltage at 20°C (VDC) S012 12 225 7.2 1.0 20 HS12 12 225 7.2 1.0 20 Coil Data (800mW - low operate voltage version) Table 2 Coil Voltage Code Nominal Voltage (VDC) Coil Resistance (Ω) ±10% Must operate voltage max. (VDC) Must release voltage min. (VDC) Max allowable voltage at 20°C (VDC) L012 12 180 6.5 1.0 18 HL12 12 180 6.5 1.0 18 Cover protection and mounting Coil code Ordering codes Contact material Type D G 6 0 Contact arrangement - - 5 - Contact material 30 - AgSnO2 See coil tables 1 or 2 Contact arrangement 11 - SPDT (1 C/O, 1 Form C) 22 - 2 x SPDT ( 2 x 1C/O) Cover protection category 2 - in cover, flux tight (for reflow - see Note 3) 3 - in cover, sealed - IP67 Connection mode 5 - for PCB Coil Codes Page 2 of 3 S012 - 12VDC Standard Coil HS12 - 12VDC Standard Coil for reflow L012 - 12VDC Low Operate Voltage Coil HL12 - 12VDC Low Operate Voltage Coil for reflow Ref: DG60 030116JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE. DG60 ultra miniature pcb automotive relay Fig. 1 PCB Mounting Dimensions Fig. 2 4 0.157 1.0 6- 1.6 0.063 4.8 0.189 0.039 8.2 4.8 0.189 8.4 0.331 4- 0.323 Overall Dimensions 0.9 0.035 Mounting Holes (Bottom View) Dimensions in mm / inches. Inch equivalents are for general information only. Dimensions in mm Wiring Diagrams (Bottom View) Reference Curves Fig. 3 Load limit curve 225 24 22 22 20 10 0 05 10 20 Switching current (A) 25 30 Coil voltage (VDC) 30 Umax. 18 16 14 12 10 8 18 16 Umax. 14 12 10 8 6 Upick-up (initial) 6 4 4 2 2 0 -60 coil resistance 20 20 Coil voltage (VDC) Switching voltage( VDC) 40 180 coil resistance 24 Upick-up (initial) 0 -40- 20 02 04 06 08 01 Ambient temperature (°C) 00 -60- 40 -200 20 40 60 80 100 Ambient temperature (°C) Notes: 1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC. 2: Electrical life is strongly dependent on switching frequency, On/Off ratio and environmental conditions. 3: Reflow compatible plastics only available in flux tight version and with Class H coil insulation. Consult factory before ordering. Page 3 of 3 Ref: DG60 030116JHM American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 www.aecsensors.com Sales Department Tel: (888) 847-6552 Specifications are subject to change without notice. E&OE.