HDBL151G THRU HDBL159G Single Phase 1.5 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1400 Volts Current 1.5 Amperes DBL .255(6.5) .315(8.0) .245(6.2) .285(7.24) Features aUL Recognized File # E-96005 aGlass passivated junction aIdeal for printed circuit board aReliable low cost construction utilizing .335(8.51) .320(8.12) .102(2.60) .094(2.40) .08(2.03) .05(1.27) .045(1.14) .035(0.89) .023(0.58) .018(0.46) .185(4.69) .150(3.81) .205(5.2) .195(5.0) .075(1.90) .055(1.39) molded plastic technique .350(8.9) .300(7.6) .013(0.33) .0088(0.22) DBLS aHigh surge current capability aHigh temperature soldering guaranteed: .047(1.20) .040(1.02) 250 / 10 seconds at 5 lbs., ( 2.3 kg ) tension aSmall size, simple installation aLeads solderable per MIL-STD-202 Method 208 .205(5.2) .195(5.0) .404(10.3) .386(9.80) .335(8.51) .320(8.13) 45 0 .255(6.5) .245(6.2) .013(0.33) .0088(0.22) .102(2.60) .094(2.40) .060(1.53) .040(1.02) .013(0.33) .003(0.076) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number HDBL HDBL HDBL HDBL HDBL HDBL HDBL HDBL HDBL 151G 152G 153G 154G 155G 156G 157G 158G 159G Units HDBLS HDBLS HDBLS HDBLS HDBLS HDBLS HDBLS HDBLS HDBLS 151G 152G 153G 154G 155G 156G 157G 158G 159G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current @TA = 40 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 1.5A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Typical Thermal Resistance (Note) RÛJA RÛJL Operating Temperature Range TJ Storage Temperature Range TSTG 50 35 50 100 200 400 600 800 1000 1200 1400 70 140 280 420 560 700 840 980 100 200 400 600 800 1000 1200 1400 V V V 1.5 A 50 A 1.1 1.25 10 500 40 15 -55 to +150 -55 to +150 Note: Thermal resistance from Junction to Ambient and from Junction to Lead Mounted on P.C.B. with 0.51 x 0.51” (13 x 13mm) Copper Pads. V uA uA /w RATINGS AND CHARACTERISTIC CURVES (HDBL151G THRU HDBL159G) FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 1.5 FIG.1- MAXIMUM DERATING CURVE FOR OUTPUT RECTIFIED CURRENT .06" (1.5mm) PCB Copper Pauls .51" x .51" (13mm x 13mm) 0.75 60Hz RESISTIVE OR INDUCTIVE LOAD 0 20 40 60 80 100 120 60 Tj=25 0C 40 30 20 10 0 140 150 Single Sine - Wave (JEDEC Method) 50 1 2 o AMBIENT TEMPERATURE. ( C) 4 6 10 20 40 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.4- TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 10 100 INSTANTANEOUS FORWARD CURRENT. (A) INSTANTANEOUS REVERSE CURRENT. ( A) Tj=125 0C 10 1.0 Tj=25 0C .10 .01 0 20 40 60 80 100 120 FIG.5- TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT CAPACITANCE.(pF) 100 1 1.0 Tj=25 0C f=1.0MHz Vsig=50mVp-p 10 REVERSE VOLTAGE. (V) 0.1 0 Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE .01 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 10 1 100 0.4 0.6 0.8 1.0 FORWARD VOLTAGE. (V) 1.2 1.4 60 100