Aluminum Electrolytic Capacitors/ FK Radial Lead Type Series: FK Type: A ■ Features ● Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) ● Endurance : 3000 h to 5000 h at +105 °C ● RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ –55 °C to +105 °C 6.3 V.DC to 35 V.DC 180 µF to 12000 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV (µA) After 2 minutes W.V. 6.3 10 16 25 35 tan δ 0.22 0.19 0.16 0.14 0.12 Add 0.02 per 1000 µF for products of 1000 µF or more. (120 Hz/+20 °C) After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 °C, the capacitors shall meet the limits specified bellow. Duration : φ8: 3000 hours , φ10: 4000 hours , φ12.5 to φ18: 5000 hours Endurance Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life ■ Frequency correction factor for ripple current W.V.(V.DC) 6.3 to 35 Frequency (Hz) Cap (µF) 60 120 1k 10 k 100 k 180 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 to 12000 0.75 0.80 0.95 1.00 1.00 1200 ■ Dimensions in mm (not to scale) [mm] Sleeve φ8 φd±0.05 φ10< + Pressure relief L✽ 14 min. φD±0.5 3 min. F±0.5 – φD±0.5 ✽ L<16 : L±1.5 L>20 : L±2.0 (mm) Body Dia. φD 8 10 16 18 Body Length L — — 12.5 to 25 30 to 40 — — Lead Dia. φd 0.6 0.6 0.6 0.8 0.8 0.8 Lead space F 3.5 5.0 5.0 5.0 7.5 7.5 12.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. May. 2008 Aluminum Electrolytic Capacitors/ FK ■ Case size/Impedance/Ripple current Impedance ()/(100 kHz) Case size (φDL) 8 8 8 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 16 16 16 18 18 18 11.5 15 20 12.5 16 20 25 30 15 20 25 30 35 40 15 20 25 15 20 25 Ripple Current (mA r.m.s.)/(100 kHz) +20 °C –10 °C +105 °C 0.090 0.062 0.044 0.063 0.049 0.035 0.033 0.025 0.048 0.029 0.022 0.018 0.016 0.014 0.038 0.026 0.019 0.036 0.025 0.018 0.180 0.124 0.088 0.126 0.098 0.070 0.066 0.050 0.096 0.058 0.044 0.036 0.032 0.028 0.076 0.052 0.038 0.072 0.050 0.036 630 860 1220 900 1240 1490 1680 2140 1400 1890 2280 2720 2940 3010 1800 2330 2760 2060 2640 2850 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jan. 2008 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Case size W.V. Cap. (±20 %) Dia. (V) (µF) (mm) 680 1000 1500 1800 2200 6.3 3300 4700 5600 6800 8200 12000 560 820 1200 1500 1800 10 2700 3900 4700 5600 6800 8200 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 °C) (+20 °C) (mm) (mA r.m.s.) () (hours) 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 630 860 900 1220 1240 1400 1490 1680 2140 1890 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 630 860 900 1220 1240 1400 1490 1680 2140 1890 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.048 0.035 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 0.090 0.062 0.063 0.044 0.049 0.048 0.035 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 5000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 4000 3000 4000 5000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK0J681( ) EEUFK0J102L( ) EEUFK0J102( ) EEUFK0J152L( ) EEUFK0J152( ) EEUFK0J182S( ) EEUFK0J222( ) EEUFK0J222L( ) EEUFK0J332L EEUFK0J332( ) EEUFK0J332S( ) EEUFK0J472( ) EEUFK0J472S( ) EEUFK0J562L EEUFK0J562S( ) EEUFK0J682L EEUFK0J822L EEUFK0J822( ) EEUFK0J822S( ) EEUFK0J123S( ) EEUFK1A561( ) EEUFK1A821L( ) EEUFK1A821( ) EEUFK1A122L( ) EEUFK1A122( ) EEUFK1A152S( ) EEUFK1A182( ) EEUFK1A182L( ) EEUFK1A272L EEUFK1A272( ) EEUFK1A272S( ) EEUFK1A392( ) EEUFK1A392S( ) EEUFK1A472L EEUFK1A472S( ) EEUFK1A562L EEUFK1A682L EEUFK1A682( ) EEUFK1A682S( ) EEUFK1A822S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 Endurance : 105 °C φ8=3000 h, φ10=4000 h, φ12.5 to φ18=5000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Case size W.V. Cap. (±20 %) Dia. (V) (µF) (mm) 390 680 820 1000 1200 1500 16 2200 2700 3300 3900 4700 5600 6800 270 390 470 560 820 1000 1200 25 1500 1800 2200 2700 3300 4700 8 8 10 8 10 10 12.5 10 10 12.5 16 12.5 18 12.5 12.5 16 12.5 18 16 18 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 16 12.5 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 °C) (+20 °C) (hours) (mm) (mA r.m.s.) () 11.5 15 12.5 20 16 20 15 25 30 20 15 25 15 30 35 20 40 20 25 25 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 20 35 40 25 20 25 630 860 900 1220 1240 1490 1400 1680 2140 1890 1800 2280 2060 2720 2940 2330 3010 2640 2760 2850 630 860 900 1220 1240 1490 1400 1680 1890 2140 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.016 0.026 0.014 0.025 0.019 0.018 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.029 0.025 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 4000 5000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 4000 3000 4000 4000 5000 4000 5000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 7.5 7.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1C391( ) EEUFK1C681L( ) EEUFK1C681( ) EEUFK1C821L( ) EEUFK1C102( ) EEUFK1C122( ) EEUFK1C122S( ) EEUFK1C152L( ) EEUFK1C222L EEUFK1C222( ) EEUFK1C222S( ) EEUFK1C272( ) EEUFK1C272S( ) EEUFK1C332L EEUFK1C392L EEUFK1C392S( ) EEUFK1C472L EEUFK1C472S( ) EEUFK1C562( ) EEUFK1C682S( ) EEUFK1E271( ) EEUFK1E391L( ) EEUFK1E471( ) EEUFK1E561L( ) EEUFK1E561( ) EEUFK1E821( ) EEUFK1E821S( ) EEUFK1E102L( ) EEUFK1E122( ) EEUFK1E152L EEUFK1E152S( ) EEUFK1E182( ) EEUFK1E182S( ) EEUFK1E222L EEUFK1E222S( ) EEUFK1E272L EEUFK1E332L EEUFK1E332( ) EEUFK1E332S( ) EEUFK1E472S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 Endurance : 105 °C φ8=3000 h, φ10=4000 h, φ12.5 to φ18=5000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ FK ■ Standard Products Case size W.V. Cap. (±20 %) Dia. (V) (µF) (mm) 180 270 390 560 680 820 35 1000 1200 1500 1800 2200 3300 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 12.5 16 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 °C) (+20 °C) (hours) (mm) (mA r.m.s.) () 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 35 20 40 25 20 25 630 860 900 1220 1240 1490 1400 1680 1890 2140 1800 2280 2060 2720 2940 2330 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.029 0.025 0.038 0.022 0.036 0.018 0.016 0.026 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 4000 5000 4000 5000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1V181( ) EEUFK1V271L( ) EEUFK1V271( ) EEUFK1V391L( ) EEUFK1V391( ) EEUFK1V561( ) EEUFK1V561S( ) EEUFK1V681L( ) EEUFK1V821( ) EEUFK1V102L EEUFK1V102S( ) EEUFK1V122( ) EEUFK1V122S( ) EEUFK1V152L EEUFK1V182L EEUFK1V182S( ) EEUFK1V222L EEUFK1V222( ) EEUFK1V222S( ) EEUFK1V332S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 Endurance : 105 °C φ8=3000 h, φ10=4000 h, φ12.5 to φ18=5000 h When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. The taping dimensions are explained on p.178 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008