Low Profile Shielded SMD Chip Power Inductor ASPI-2410 series Pb RoHS Compliant 2.4 x 2.4 x 1.0mm FEATURES: APPLICATIONS: • • • • • • Mobile phones • MP3 & 4 and other portable communication equipment • Digital cameras. Small size and low profile: 1.0mm Small DCR and high rated current High reliability to mechanical stress Magnetically shielded by magnetic powder molding Suitable for RoHS reflow profile ELECTRICAL SPECIFICATIONS: Abracon P/N: Operating Temperature & Humidity : Storage Temperature & Humidity: Part Number Inductance Units Symbol ASPI-2410-R68 ASPI-2410-1R0 ASPI-2410-1R5 ASPI-2410-2R2 ASPI-2410-3R3 ASPI-2410-4R7 ASPI-2410-6R8 ASPI-2410-100 ASPI-2410-150 ASPI-2410-220 μH L 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10.0 15.0 22.0 ASPI-2510 Series -25˚C to +120˚C (Including self generated heat) -10˚C to +40˚C, 30% to 70% RH Inductance Tolerance % M, N N N M M M M M M M M DCR mΩ DCR 60 70 110 140 220 290 410 690 1020 1470 DCR Tolerance % ±30% ±20% Saturation Current A Isat* 2.60 2.00 1.75 1.30 1.05 0.92 0.75 0.60 0.50 0.40 Temperature Rise Current A Irms* 2.50 1.90 1.70 1.20 1.00 0.90 0.65 0.55 0.45 0.40 Test Conditions 1. Inductance is measured in HP-4285A Precision LCR Meter. 2. RDC is measured in DU-5011 milli ohm meter.(or equivalent). 3. Isat : Based on inductance change (∆ L/Lo :≤ -30%) 4. Irms : Based on temperature rise (∆ T : 40oC TYP. ) 5. Test Freq: 100KHz, 1Vrms OPTIONS AND PART IDENTIFICATION ASPI-2410Inductance Code Please refer to the Electrical Spec Table Tolerance N: ±30%* M: ±20%* Packaging T2: Tape and Reel (2kpcs / reel) *N for L = 0.68 and 1µH, M for L = 1.5 ~ 22µH ABRACON IS ISO9001:2008 CE RTIFIED Revised: 10.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Low Profile Shielded SMD Chip Power Inductor ASPI-2410 series Pb RoHS 2.4 x 2.4 x 1.0mm Compliant OUTLINE DRAWING: Mechanical Dimensions Circuit Schematic A B C Max. 2.4±0.1 2.4±0.1 1.0 Recommended Land Pattern No Polarity Materials No 1 2 3 4 Part Name Ferrite core Terminals Coil Adhesive Magnetic Powder Material Ni-Zn Ferrite Ag/Ni/Sn Cu/P180 Grd 1 Silicon Base Resin Ni-Zn Ferrite Dimension: mm ABRACON IS ISO9001:2008 CE RTIFIED Revised: 10.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com Low Profile Shielded SMD Chip Power Inductor ASPI-2410 series Pb RoHS 2.4 x 2.4 x 1.0mm Compliant TAPE & REEL: T: 2,000pcs / reel A 2.65 B 2.65 K 1.25 F 4 T 0.25 Dimension: mm REFLOW PROFILE: ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 10.20.11 Visit www.abracon.com for Terms & Conditions of Sale 30332 E speranza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001| www.abracon.com