MIL-PRF-123 www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 FEATURES • Space-level reliability • Military qualified products • Federal stock control number, CAGE CODE 2770A • High reliability tested per MIL-PRF-123 • Lead-bearing (min. 4 %) termination finish “Z” • Silver / palladium alloy finish “M” • Guarded termination finish “S” • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Space systems • Satellite systems • Avionic systems • Sonar systems • Missiles applications • Global positioning systems ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at +25 °C, unless otherwise specified Operating Temperature: -55 °C to +125 °C Capacitance Range: 1.0 pF to 470 nF Voltage Range: 50 VDC to 100 VDC Temperature Coefficient of Capacitance (TCC): BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C, with 0 VDC applied BX: ± 15 % from -55 °C to +125 °C, with 0 VDC applied BX: +15 %, -25 % from -55 °C to +125 °C, with 100 % rated VDC applied Aging Rate: BP: 0 % maximum per decade BX: 1 % maximum per decade Insulation Resistance (IR): at +25 °C and rated voltage 100 000 MΩ minimum or 1000 ΩF, whichever is less Dielectric Strength Test: performed per method 103 of EIA-198-2-E. Applied test voltages: ≤ 100 VDC-rated: 250 % of rated voltage Dissipation Factor (DF): BP: 0.15 % maximum BX: 2.50 % maximum Test frequency: 1 MHz ± 50 kHz for BP capacitors ≤ 1000 pF All other BP and BX at 1 kHz ± 50 Hz Revision: 15-May-17 Document Number: 45229 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC STYLE (CASE) BP BP BP BP BP BP BP BX BX BX BX BX BX BX CKS51 (0805) CKS55 (1206) CKS52 (1210) CKS53 (1808) CKS56 (1812) CKS57 (1825) CKS54 (2225) CKS51 (0805) CKS55 (1206) CKS52 (1210) CKS53 (1808) CKS56 (1812) CKS57 (1825) CKS54 (2225) CAPACITANCE MAXIMUM VOLTAGE (V) 100 100 100 100 100 100 50 100 100 100 100 100 100 50 MINIMUM 1.0 pF 1.0 pF 300 pF 300 pF 1200 pF 3600 pF 1100 pF 330 pF 4700 pF 5600 pF 5600 pF 27 000 pF 56 000 pF 120 000 pF MAXIMUM 680 pF 2200 pF 3300 pF 1000 pF 10 000 pF 22 000 pF 10 000 pF 18 000 pF 39 000 pF 100 000 pF 100 000 pF 56 000 pF 470 000 pF 470 000 pF Note • Detail ratings see “Selection Chart” ORDERING INFORMATION - MIL-PRF-123 (1) M123A 10 BX B 103 K Z W MILITARY STYLE SLASH SHEET DIELECTRIC DC VOLTAGE CAPACITANCE VALUE CAPACITANCE TOLERANCE TERMINATION PACKAGING MIL-PRF-123 10 = CKS51 (0805) 11 = CKS52 (1210) 12 = CKS53 (1808) 13 = CKS54 (2225) 21 = CKS55 (1206) 22 = CKS56 (1812) 23 = CKS57 (1825) BP BX B = 50 V C = 100 V Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. R denotes decimal place. Examples: 1R0 = 1.0 pF 103 = 10 000 pF 104 = 100 000 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F=±1% J=±5% K = ± 10 % M = ± 20 % Z = Ni barrier with tin / lead plate min. 4 % lead S = guarded termination M = silver / palladium alloy W = waffle pack J = full 7" reel A = 7" reel, customer defined quantity For BP: B, C, D, J, K For BX: K, M Note (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance Consult for questions: [email protected] DIMENSIONS in inches (millimeters) W L T P MIL-PRF-123 STYLE /10 /11 /12 /13 /21 /22 /23 CKS51 CKS52 CKS53 CKS54 CKS55 CKS56 CKS57 Revision: 15-May-17 LENGTH (L) 0.080 ± 0.015 (2.03 ± 0.38) 0.120 ± 0.015 (3.05 ± 0.38) 0.180 ± 0.015 (4.57 ± 0.38) 0.220 ± 0.015 (5.59 ± 0.38) 0.120 ± 0.015 (3.05 ± 0.38) 0.180 ± 0.015 (4.57 ± 0.38) 0.180 ± 0.015 (4.57 ± 0.38) WIDTH (W) 0.050 ± 0.015 (1.27 ± 0.38) 0.100 ± 0.015 (2.54 ± 0.38) 0.080 ± 0.015 (2.03 ± 0.38) 0.250 ± 0.015 (6.35 ± 0.38) 0.060 ± 0.015 (1.52 ± 0.38) 0.125 ± 0.015 (3.18 ± 0.38) 0.250 ± 0.015 (6.35 ± 0.38) THICKNESS (T) MINIMUM MAXIMUM 0.020 (0.51) 0.055 (1.40) 0.020 (0.51) 0.065 (1.65) 0.020 (0.51) 0.065 (1.65) 0.020 (0.51) 0.070 (1.78) 0.020 (0.51) 0.065 (1.65) 0.022 (0.56) 0.080 (2.03) 0.020 (0.51) 0.080 (2.03) TERM. (P) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) 0.020 ± 0.010 (0.51 ± 0.25) Document Number: 45229 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE SLASH SHEET CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 1R0 1.0 pF 1R1 1.1 pF 1R2 1.2 pF 1R3 1.3 pF 1R5 1.5 pF 1R6 1.6 pF 1R8 1.8 pF 2R0 2.0 pF 2R2 2.2 pF 2R4 2.4 pF 2R7 2.7 pF 3R0 3.0 pF 3R3 3.3 pF 3R6 3.6 pF 3R9 3.9 pF 4R3 4.3 pF 4R7 4.7 pF 5R1 5.1 pF 5R6 5.6 pF 6R2 6.2 pF 6R8 6.8 pF 7R5 7.5 pF 8R2 8.2 pF 9R1 9.1 pF 100 10 pF 110 11 pF 120 12 pF 130 13 pF 150 15 pF 160 16 pF 180 18 pF 200 20 pF 220 22 pF 240 24 pF 270 27 pF 300 30 pF 330 33 pF 360 36 pF 390 39 pF 430 43 pF 470 47 pF 510 51 pF 560 56 pF 620 62 pF 680 68 pF 750 75 pF 820 82 pF 910 91 pF 101 100 pF 111 110 pF 121 120 pF 131 130 pF 151 150 pF Revision: 15-May-17 CKS51 /10 0805 50 V 100 V B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CKS55 /21 1206 50 V 100 V B C CKS52 /11 1210 50 V 100 V B C BP CKS53 /12 1808 50 V 100 V B C CKS56 /22 1812 50 V 100 V B C CKS57 /23 1825 50 V 100 V B C CKS54 /13 2225 50 V B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45229 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE SLASH SHEET CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 161 160 pF 181 180 pF 201 200 pF 221 220 pF 241 240 pF 271 270 pF 301 300 pF 331 330 pF 361 360 pF 391 390 pF 431 430 pF 471 470 pF 511 510 pF 561 560 pF 621 620 pF 681 680 pF 751 750 pF 821 820 pF 911 910 pF 102 1.0 nF 112 1.1 nF 122 1.2 nF 132 1.3 nF 152 1.5 nF 162 1.6 nF 182 1.8 nF 202 2.0 nF 222 2.2 nF 242 2.4 nF 272 2.7 nF 302 3.0 nF 332 3.3 nF 362 3.6 nF 392 3.9 nF 432 4.3 nF 472 4.7 nF 512 5.1 nF 562 5.6 nF 622 6.2 nF 682 6.8 nF 752 7.5 nF 822 8.2 nF 912 9.1 nF 103 10 nF 113 11 nF 123 12 nF 133 13 nF 153 15 nF 163 16 nF 183 18 nF 203 20 nF 223 22 nF Revision: 15-May-17 CKS51 /10 0805 50 V 100 V B C • • • • • • • • • • • • • • • • CKS55 /21 1206 50 V 100 V B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • CKS52 /11 1210 50 V 100 V B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • BP CKS53 /12 1808 50 V 100 V B C • • • • • • • • • • • • • • CKS56 /22 1812 50 V 100 V B C CKS57 /23 1825 50 V 100 V B C CKS54 /13 2225 50 V B • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45229 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC BX STYLE CKS51 SLASH SHEET CASE CODE CKS55 CKS52 CKS53 CKS56 CKS57 CKS54 /10 /21 /11 /12 /22 /23 /13 0805 1206 1210 1808 1812 1825 2225 VOLTAGE (VDC) 50 V 100 V 50 V 100 V 50 V 100 V 50 V 100 V 100 V 50 V 100 V 50 V VOLTAGE CODE B C B C B C B C C B C B CAP. CODE CAP. 331 330 pF • • 391 390 pF • • 471 470 pF • • 561 560 pF • • 681 680 pF • • 821 820 pF • • 102 1.0 nF • • 122 1.2 nF • • 152 1.5 nF • • 182 1.8 nF • • 222 2.2 nF • • 272 2.7 nF • • 332 3.3 nF • • 392 3.9 nF • • 472 4.7 nF • • 562 5.6 nF • • • • • • 682 6.8 nF • • • • • • 822 8.2 nF • • • • • • 103 10 nF • • • • • • 123 12 nF • • • • • • 153 15 nF • • • • • • 183 18 nF • • • • • • 223 22 nF • • • • • 273 27 nF • • • • • 333 33 nF • • • • 393 39 nF • • • • 473 47 nF • • • 563 56 nF • • • 683 68 nF • • 823 82 nF • • • 104 100 nF • • • • • • • • 124 120 nF • • 154 150 nF • • 184 180 nF • • 224 220 nF • • 274 270 nF • • 334 330 nF • • 394 390 nF • • 474 470 nF • • Revision: 15-May-17 Document Number: 45229 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon PACKAGE QUANTITIES (1)(2) STYLE BODY SIZE WAFFLE PACK “W” (3) CKS51 CKS55 CKS52 CKS53 CKS56 CKS57 CKS54 0805 1206 1210 1808 1812 1825 2225 666 511 475 430 350 244 216 TAPE AND REEL “A” (4) “J” (5) 2 1000 ≥ 100 1000 ≥ 100 1000 ≥ 100 500 ≥ 100 500 ≥ 100 500 ≥ 100 500 TAPE SIZE 8 mm 8 mm 8 mm 12 mm 12 mm 12 mm 12 mm Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) The quantities in the table are the maximum number of pieces per waffle package. Order quantity can be any amount (4) Order quantity for “A” package code can be any amount greater than or equal to 100 pieces. The maximum quantity on a reel is the same as the quantity specified for the “J” package code (5) Orders for “J” package code product must be in increments of the quantity listed in the table PART MARKING EXPLANATION FIRST DIGIT V = Vishay SECOND DIGIT ALPHABETIC SIGNIFICANT CHARACTER FIGURES A 1.0 B 1.1 C 1.2 D 1.3 E 1.5 F 1.6 G 1.8 H 2.0 J 2.2 K 2.4 L 2.7 M 3.0 N 3.3 P 3.6 Q 3.9 R 4.3 S 4.7 T 5.1 U 5.6 V 6.2 W 6.8 X 7.5 Y 8.2 Z 9.1 a 2.5 b 3.5 d 4.0 e 4.5 f 5.0 m 6.0 n 7.0 t 8.0 y 9.0 Revision: 15-May-17 THIRD DIGIT NUMERICAL DECIMAL CHARACTER MULTIPLIER 0 100 1 101 2 102 3 103 4 104 5 105 6 106 7 107 8 108 9 109 EXAMPLES Multiplier Vishay VA1 Capacitance code VL0 = 2.7 pF VA2 = 100 pF VR1 = 43 pF Vd3 = 4000 pF Document Number: 45229 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MIL-PRF-123 www.vishay.com Vishay Vitramon STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to +40 °C ambient temperature and ≤ 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 15-May-17 Document Number: 45229 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000