ARINC Series 400 (Cannon) 527-016 Split EMI/RFI Conical Ring Style Backshell for Cannon DPKA and DPKB Series Connectors 527-016 M 10 A 1 A M Basic Part No. Strain Relief (Style A or D) or Gland Nut (Style M) Finish Symbol (Table III) Backshell Style: A or B (Style B Available on Connector Sym B Only) Dash No. (Table II) 1 = With RFI/EMI Gaskets, 2 = Without RFI/EMI Gaskets Connector Symbol (Table I) RFI/EMI Entry Gasket Typ. Backshell Style A #4-40 UNC x 7/16 (4 Places) Typ. 2.65 (67.3) Max Typ. 2.00 (50.8) Typ. RFI/EMI Backshell Gasket Typ. Backshell Style B Interface Gasket 1.031 (26.2) .969 (24.6) Typ. .813 (20.7) B Typ. A Typ. .135 (3.4) C C D D Strain Relief Style A © 2004 Glenair, Inc. Strain Relief Style M CAGE Code 06324 Cable Range Typ. E Gland Nut Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-4 ARINC Series 400 (Cannon) 527-016 Split EMI/RFI Conical Ring Style Backshell for Cannon DPKA and DPKB Series Connectors TABLE I: CONNECTOR INTERFACE DIMS Connector Connector Symbol Series A DPKA B DPKB/DPJM A ±.062 (1.6) 2.095 (53.2) 3.395 (86.2) B ±.005 (.1) 1.895 (48.1) 3.195 (81.2) TABLE II: CABLE ENTRY Dash No. 03 04 06 08 10 12 C Max .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) D Max .843 (21.4) .906 (23.0) 1.093 (27.8) 1.187 (30.1) 1.281 (32.5) 1.500 (38.1) E Max .630 (16.0) .755 (19.2) .942 (23.9) 1.067 (27.1) 1.192 (30.3) 1.380 (35.1) Cable Range Min Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .344 (8.7) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) TABLE III - FINISH OPTIONS Symbol B J M N NF T Finish Cadmium Plate, Olive Drab Iridite, Gold Over Cadmium Plate over Nickel Electroless Nickel Cadmium Plate, Olive Drab, Over Nickel Cadmium Plate, Olive Drab, Over Electroless Nickel (500 Hour Salt Spray) Cadmium Plate, Bright Dip Over Nickel (500 Hour Salt Spray) CONSULT FACTORY FOR OTHER AVAILABLE FINISHES 1. Metric dimensions (mm) are indicated in parentheses. 2. Material/Finish: Adapter, Backshell, Clamp Assemblies, Gland Nut = Al Alloy/Table II Hardware = SST/Passivate Backshell and Entry Gaskets = Metalastic/N.A. Interface Gasket = Monel Mesh/N.A. © 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] G-5