BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator FEATURES PCMCIA Cards and Wireless LAN Electrical appliances such as cameras, VCRS Up to 1A Output Current 70uA Operating Supply Current Excellent Line Regulation: 0.05%/V Low Dropout: 350mV@1A(VOUT=3.3V) the input voltage from 2.5V to 6V and delivers 1A High Power Supply Rejection Ratio load current. The BL9110 is available in two types, Wide Operating Voltage Range: 2.5V to 6.0V either fixed or adjustable output voltage. The output 1V to 5V Factory-Preset Output voltage of the fixed types is preset at an internally High Accuracy: ±1% or ±2% trimmed voltage 1V, 1.2V, 1.3V, 1.5V, 1.8V, 2.5V, Built-in Auto Discharge Function 2.7V, 2.8V, 2.85V, 3.0V, 3.2V, 3.3V, 5V or can be 500mA in-rush Current Limit made with options of the output range from 1V to 5V Fold-back Current Limit Protection in 50mV increments. The output range of adjustable Thermal Shutdown Protection types is from 1V to 5V. The BL9110 consists of a DFN-6, SOT-89-5, SOT-89-3, DESCRIPTION Step-Down Converter The BL9110 is a low-dropout regulator that operates , SOT-223-5, voltage reference, an error amplifier, resistor net for SOT-223-3, TO-263-3, TO-220-3, TO-252-3 setting output voltage, a current limit circuit for and TO-252-5 Package over-current and a thermal-shutdown circuit. RoHS Compliant and 100% Lead (Pb)-Free A standby mode with ultra low supply current can be realized with the chip enable function. Since the APPLICATIONS packages for BL9110 are DFN-6, SOT-89-5, Portable Communication Equipment SOT-223-5, Battery-Powered Equipment SOT-89-3, TO-252-3, TO92-3 and TO-252-5 with Laptop, Palmtops, Notebook Computers high power dissipation, high density mounting of the Hand-Held Instruments IC on board is possible. ORDERING INFORMATION BL9110-VVV X X XX Package: AA: DFN-6 BA: SOT-89-5-A CA: TO-252-5 DA: SOT-223-5 EA: TO-252-3-A FA: SOT-223-3-A FC: SOT-223-3-C GA: TO-263-3-A GC: TO-263-3-C HA: TO-220-3 IA: SOT-89-3-A IC: SOT-89-3-C JA:TO92-3 SOT-223-3, TO-263-3, TO-220-3, TYPICAL APPLICATION BB: SOT-89-5-B EB: TO-252-3-B FB: SOT-223-3-B FD: SOT-223-3-D GB: TO-263-3-B VDD VDD VOUT VOUT C1 10uF C2 2.2uF Chip Enable IB: SOT-89-3-B BL9110 CE GND Features: P: Standard (default, lead free) C: Customized Output Voltage Accuracy A: ±1% B: ±2% Output Voltage 100:1.0V 120:1.2V 130:1.3V 150:1.5V 180:1.8V 250:2.5V 270:2.7V 280:2.8V 285:2.85V 300:3.0V 320:3.2V 330:3.3V 500:5.0V ADJ: adjustable PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 1 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Absolute Maximum Rating Input Supply Voltage (VDD) CE Input Voltage Output Voltage Output Current (Note 1) -0.3V to +7V -0.3V to +7V -0.3V to VIN+0.3V 1.4A Maximum Junction Temperature 125°C (Note2) Operating Temperature Range -40°C to 85°C Storage Temperature Range -65°C to 125°C Lead Temperature (Soldering, 10s) 300°C Step-Down Converter , Package Information DFN-6 TOP VIEW 2 GND 3 VDD NC/ADJ 1 5 VDD GND 2 4 CE CE 3 5 VOUT CE 1 GND 4 VDD TO-252-5 TOP VIEW 5 VOUT 4 VDD MARKING VOUT 6 MARKING 1 MARKING VOUT SOT-89-5 TOP VIEW SOT-89-5 TOP VIEW 2 MARKING NC/ADJ 3 3 2 1 VOUT GND GND AA BA 4 5 CE VDD BB CA Part Number Top Mark Temp Range BL9110AA BL9110-VVVXXAA -40°C to +85°C YWSS VVV (Note3) BL9110BA/B BL9110-VVVXXBA/B -40°C to +85°C YWSS VVV BL9110CA BL9110-VVVXXCA -40°C to +85°C YWSS VVV SOT-223-3 TOP VIEW SOT-223-5 TOP VIEW TO-263-3 TOP VIEW MARKING MARKING MARKING 1 2 3 VDD VOUT GND 4 5 ADJ CE FA FB FC FD 1 2 3 VOUT GND GND VDD GND VOUT VDD GND VDD VDD VOUT VOUT 1 GA GB GC GND GND VDD Part Number Top Mark Temp Range BL9110-VVVXXDA BL9110DA -40°C to +85°C PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 2 3 VOUT VDD GND 2 VDD VOUT VOUT BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator YWSS VVV BL9110EA/B BL9110-VVVXXEA/B -40°C to +85°C YWSS VVV BL9110FA/B/C/D Step-Down BL9110-VVVXXFA/B/C/D Converter YWSS VVV BL9110GA/B/C BL9110-VVVXXGA/B/C DA SOT-89-3 TOP VIEW TO92 TOPVIEW MARKING MARKING 1 2 3 GND GND VOUT VOUT VDD GND VDD VOUT VDD JA HA Part Number BL9110-VVVXXHA BL9110-VVVXXI/A/B/C BL9110-VVVXXJA PPMIC BU BL9110 Rev 2.0 04/2016 , -40°C to +85°C YWSS VVV IA IB IC -40°C to +85°C Top Mark 1 2 3 GND VOUT VDD Temp Range BL9110HA -40°C to +85°C YWSS VVV BL9110IA/B/C -40°C to +85°C YWSS VVV BL9110JA -40°C to +85°C YWSS VVV www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 3 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Pin Descriptions Symbol Description VOUT Output Pin GND Ground Pin CE Chip Enable Pin (High active) VDD Input Pin ADJ/NC Adjustable/No Connection Step-Down Converter , VVV 100 120 130 … 285 … 495 500 ADJ Voltage (V) 1.0 1.2 1.3 … 2.85 … 4.95 5.0 Adjustable Y 0 1 2 3 4 … Year 2010 2011 2012 2013 2014 …… W Week 01 A 2 B … … 26 Z 27 28 … … 52 Thermal Resistance (Note 4): Package ӨJA ӨJC DFN-6 95C/W 10C/W SOT-89-5 160C/W 45C/W TO-252-5 90C/W 10C/W SOT-223-5 160C/W 20C/W TO-252-3 90C/W 10C/W SOT-223-3 160C/W 20C/W TO-263-3 65C/W 7C/W TO-220-3 50C/W 7C/W SOT89-3 180C/W 50C/W Note 1: Absolute Maximum Ratings are those values beyond which the life of a device may be impaired. Note 2: The BL9110 is guaranteed to meet performance specifications from 0°C to 70°C. Specifications over the –40°C to 85°C operating temperature range are assured by design, characterization and correlation with statistical process controls. Note 3： Y: Year of assembly manufacturing W: Week of assembly manufacturing SS: Lot ID (the 7th and 8th number of Lot numbers) VVV: Voltage code (for example 100 stands for 1.0V) Note 4: Thermal Resistance is specified with approximately 1 square of 1 oz copper. PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 4 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Block Diagram Step-Down Converter VDD Voltage Reference - Voltage Buffer EA + ADJ Loop Compensation Fold-back Current Limit Over Temperature Protection CE , Logic Control Power Good Detector VOUT Soft-start GND PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 5 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Electrical Characteristics (Note 5) BL9110-1.2V Electrical Characteristics (VDD=2.5V, VOUT=1.2V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Step-Down Conditions MIN TYP MAX Converter Input Voltage VDD 2.5 6 -1 +1 (Note 6) IOUT=1mA VOUT Output Voltage Accuracy -2 +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 IOUT=300mA 420 715 (note 7) VDROP Dropout Voltage IOUT=1A 870 1310 (Note 8) ΔVLINE 2.5V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔV 1mA≤I ≤1A 20 Load Regulation LOAD OUT (Note 10) IOUT=100mA Output Voltage TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit ,V % A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 6 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator BL9110-1.5V Electrical Characteristics (VDD=2.5V, VOUT=1.5V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Conditions MIN TYP MAX Input Voltage VDD 2.5 6 -1 +1 (Note 6) Converter-2 IOUT=1mA VOUT Step-Down Output Voltage Accuracy +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 I =300mA 260 445 OUT (note 7) VDROP Dropout Voltage IOUT=1A 700 1050 (Note 8) ΔVLINE 2.5V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔVLOAD 1mA≤IOUT≤1A 20 Load Regulation (Note 10) I =100mA Output Voltage OUT TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit V % ,A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1.0A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 7 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator BL9110-1.8V Electrical Characteristics (VDD=2.8V, VOUT=1.8V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Conditions MIN TYP MAX Input Voltage VDD 2.5 6 -1 +1 (Note 6) Converter-2 IOUT=1mA VOUT Step-Down Output Voltage Accuracy +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 I =300mA 180 308 OUT (note 7) VDROP Dropout Voltage IOUT=1A 570 855 (Note 8) ΔVLINE 2.5V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔVLOAD 1mA≤IOUT≤1A 20 Load Regulation (Note 10) I =100mA Output Voltage OUT TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit V % ,A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1.0A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 8 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator BL9110-2.5V Electrical Characteristics (VDD=3.5V, VOUT=2.5V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Conditions MIN TYP MAX Input Voltage VDD 2.5 6 -1 +1 (Note 6) Converter-2 IOUT=1mA VOUT Step-Down Output Voltage Accuracy +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 I =300mA 140 240 OUT (note 7) VDROP Dropout Voltage IOUT=1A 440 660 (Note 8) ΔVLINE 3.0V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔVLOAD 1mA≤IOUT≤1A 20 Load Regulation (Note 10) I =100mA Output Voltage OUT TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit V % ,A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1.0A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 9 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator BL9110-3.3V Electrical Characteristics (VDD=4.3V, VOUT=3.3V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Conditions MIN TYP MAX Input Voltage VDD 2.5 6 -1 +1 (Note 6) Converter-2 IOUT=1mA VOUT Step-Down Output Voltage Accuracy +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 I =300mA 110 188 OUT (note 7) VDROP Dropout Voltage IOUT=1A 350 525 (Note 8) ΔVLINE 3.8V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔVLOAD 1mA≤IOUT≤1A 20 Load Regulation (Note 10) I =100mA Output Voltage OUT TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit V % ,A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1.0A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT . T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 10 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator BL9110-5.0V Electrical Characteristics (VDD=6.0V, VOUT=5.0V, CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Parameter Symbol Conditions MIN TYP MAX Input Voltage VDD 2.5 6 -1 +1 (Note 6) Converter-2 IOUT=1mA VOUT Step-Down Output Voltage Accuracy +2 Current Limit ILIM 1.0 1.3 Short Circuit Current ISCC VOUT=0 250 Quiescent Current IQ IOUT=0mA 70 120 Standby Current ISTBY VCE=GND, Shutdown 0.01 1 I =300mA 100 170 OUT (note 7) VDROP Dropout Voltage IOUT=1A 340 510 (Note 8) ΔVLINE 5.5V≤VDD≤ 6V, IOUT=100mA 0.05 0.5 Line Regulation (Note 9) ΔVLOAD 1mA≤IOUT≤1A 20 Load Regulation (Note 10) I =100mA Output Voltage OUT TCVOUT ±100 -40°C≤T≤85°C Temperature Coefficient Logic Low VIL Shutdown 0.4 CE Input Threshold Logic High VIH Start up 1.0 CE Pull-down Resistance RCE 5 Output Noise Voltage eNO 10Hz to100KHz, IOUT=1mA 45 f=1kHz 70 (VOUT≤3.3V) Power Supply 0.2VP-P Ripple PSRR Rejection Ratio IOUT=100mA f=1kHz 60 (VOUT>3.3V) Thermal Shutdown Temperature TSD Shutdown, Temp increasing 165 Thermal Shutdown Hysteresis TSDHY 30 Output Discharge Resistance RDSC 50 unit V % ,A mA uA uA mV %/V mV ppm/°C V V MΩ uVRMS dB °C °C Ω Note 5: 100% production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization. Note 6: This IC includes two kinds of output voltage accuracy versions. A: ±1%, B: ±2%. Note 7: The required minimum input operating voltage is equal to V OUT+VDROP, and if VOUT+VDROP <2.5V, the required minimum input operating voltage must be set to 2.5V. VOUT is the normal output voltage, e.g. VOUT=2.8V for 2.8V fixed output version. VOUT 1 VOUT 2 Note 8: Line regulation is calculated by V 100 LINE VDD VOUT Where VOUT1 is the output voltage when VDD1=6.0V, VOUT2 is the output voltage when VDD2= max (VOUT+0.5V, 2.5V). △VDD=VDD1-VDD2. Note 9: Load regulation is calculated by VLOAD VOUT 1 VOUT 2 Where VOUT1 is the output voltage when IOUT1=1mA, and VOUT2 is the output voltage when IOUT2=1.0A. Note 10: The temperature coefficient is calculated by TC VOUT PPMIC BU BL9110 Rev 2.0 04/2016 VOUT . T VOUT www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 11 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Typical Performance Characteristic (VDD=VOUT+1V, and if VOUT<1.5V, VDD=2.5V CE=VDD, CIN=2.2F, COUT=2.2F, TA=25°C, unless otherwise noted.) Step-Down Converter Output Voltage VS. Input Voltage Dropout Voltage VS. Output Current BL9110-1.0V 1.2 1.0 1.0 0.8 0.8 550 -40oC 25oC 85oC IOUT=1mA 0.6 0.6 IOUT=99mA IOUT=300mA 0.4 0.4 IOUT=1A 0.2 0.2 Dropout Voltage (mV) 500 Output Voltage (V) , BL9110-3.3V 1.2 450 400 350 300 250 200 150 100 0.0 50 0.0 0 1 2 3 4 5 6 0 0.0 Input Voltage (V) 0.2 0.4 0.6 0.8 1.0 Output Current (A) Output Voltage VS. Input Voltage Output Voltage VS. Temperature BL9110-3.3V 3.5 BL9110-3.3V 3.40 IOUT=1mA Output Voltage (V) 2.5 2.0 IOUT=1mA 1.5 IOUT=99mA IOUT=300mA 1.0 IOUT=100mA 3.35 3.30 3.25 0.5 0.0 0.0 3.20 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 Input Voltage (V) -40 -20 0 20 40 60 80 Temperature (oC) Quiescent Current VS. Input Voltage Quiescent Current VS. Temperature BL9110-3.3V BL9110-3.3V 100 80 95 Quiescent Current (uA) Quiescent Current (uA) Output Voltage (V) 3.0 60 40 20 90 85 80 75 70 65 0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 60 3.5 4.0 Temperature (oC) PPMIC BU BL9110 Rev 2.0 04/2016 4.5 5.0 5.5 6.0 Input Voltage (V) www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 12 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Turn on Transient Response Output Voltage VS. Output Current BL9110-3.3V BL9110-3.3V 3.5 CH1: EN Pin Voltage (V) Output Voltage (V) 3.0 Step-Down Converter 2.5 CH4: Output Voltage (V) , 2.0 1.5 1.0 0.5 CH2: Input Inrush Current (mA) 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Output Current (A) Turn off Transient Response Turn off Transient Response BL9110-3.3V BL9110-3.3V 100mA, resistive load No load CH1: EN Pin Voltage (V) CH1: EN Pin Voltage (V) CH4: Output Voltage (V) CH4: Output Voltage (V) Load Transient Response Load Transient Response BL9110-3.3V BL9110-3.3V 500mA CH2: Output Current (mA) 100mA 50mA CH2: Output Current (mA) 100mA CH4: Output Voltage (mV) PPMIC BU BL9110 Rev 2.0 04/2016 CH4: Output Voltage (mV) www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 13 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Line Transient Response Line Transient Response BL9110-3.3V BL9110-3.3V IOUT=1mA IOUT=100mA Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 CH2: Input Voltage (V) CH2: Input Voltage (V) CH4: Output Voltage (mV) CH4: Output Voltage (mV) www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 14 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Applications Information The BL9110 is a low dropout CMOS-based is to choose R2=20kΩ to set the divider positive voltage regulator that operatesStep-Down the current Converter at 50uA, and then calculate R1 input voltage from +2.5V to 6.0V. Output using Equation as below: , voltages are optional ranging from 1.0V to VOUT R1 1 R 2 5.0V, and can supply current up to 1.0 A. VREF Enable Function The BL9110 is shutdown by pulling the CE input low, and turn on by driving the input high. If this feature is not be used, the CE input should be floating or tied to VDD to keep the regulator on at all times. Programming the BL9110 Adjustable LDO regulator The BL9110 is available in two types, either fixed or adjustable output voltage. The output range of the adjustable types is from 1V to 5V. The output voltage of the BL9110 adjustable regulator is programmed using an external resistor divider as show in Figure as below. The output voltage is calculated using equation as below: Where VREF=1V is the internal reference voltage. Resistors R1 and R2 should be chosen for approximately 50uA divider current. Lower value resistors can be used for improved noise performance, but the solution consumes more power. Higher resistor values should be avoided as leakage current at ADJ increases the output voltage error. The recommended design procedure BL9110 Rev 2.0 04/2016 OUTPUT VOLTAGE PROGRAMMING GUIDE OUTPUT VOLTAGTE R1 R2 1.8V 16 kΩ 20 kΩ 2.5V 30 kΩ 20 kΩ 3.3V 51 kΩ 22 kΩ 3.6V 62 kΩ 24 kΩ BL9110 Adjustable LDO regulator Programming VDD C1 10uF VDD VOUT VOUT R1 GND C3 C2 2.2uF BL9110 ADJ CE R1 VOUT VREF 1 R2 PPMIC BU A small compensation capacitor C3 placed between VOUT and ADJ may improve the stability of the adjustable. The suggested value of this capacitor is about 10pF to 22pF. R2 Thermal Protection Thermal overload protection limits total power dissipation in the BL9110. When the junction temperature exceeds TJ=165°C, the OTP circuit starts the thermal shutdown function and turns the pass element off allowing the IC to cool. The OTP circuit turns on the pass element again after IC’s junction temperature cool by 30°C, result in a pulsed output during continuous thermal www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 15 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator overload conditions. Thermal-overloaded capacitors used with the BL9110 must be protection is designed to protect the carefully selected for regulator stability and BL9110 in the event of fault conditions. Do performance. The BL9110 requires an not exceed the absolute maximum junction output capacitor between the VOUT and Step-Down Converter temperature rating of TJ=125°C for GND pins for phase compensation. Using a , continuous operation. The build-in capacitor whose value is ≥1μF on the fold-back current limit protection circuit will BL9110 input and the amount of reduce current value as output voltage capacitance can be increased without limit. drops. When output is shorted to ground, The input capacitor must be located a current limit is reduced to 250mA, avoiding distance of not more than 0.5 inch from the damaging the device. input pin of the IC and returned to a clean analog ground. Any good quality ceramic or Operating Region and Power tantalum can be used for this capacitor. Dissipation The capacitor with larger value and lower ESR (equivalent series resistance) The maximum power dissipation of BL9110 provides better PSRR and line-transient depends on the thermal resistance of the response. The output capacitor must meet case and circuit board, the temperature both requirements for minimum amount of difference between the die junction and capacitance and ESR in all LDO ambient air, and the rate of airflow. The applications. The BL9110 is designed power dissipation across the device is specifically to work with low ESR ceramic output capacitor in space-saving and PD = (VDD−VOUT) ×IOUT + VDD×IQ performance consideration. In the BL9110, phase compensation is made with the The maximum power dissipation is: output capacitor for securing stable operation even if the load current is varied. PD (MAX) = (TJ (MAX) − TA) /θJA For this purpose, use a 2.2uF capacitor between VOUT pin and GND pin as close Where TJ (MAX) is the maximum operation as possible. junction temperature 125°C, TA is the ambient temperature and the θJA is the Load-Transient Considerations junction to ambient thermal resistance. The GND pin of the BL9110 performs the dual The BL9110 load-transient response function of providing an electrical graphs show two components of the output connection to ground and channeling heat response: a DC shift from the output away. Connect the GND pin to ground impedance due to the load current change, using a large pad or ground plane. and the transient response. The DC shift is Capacitor Selection and Regulator quite small due to the excellent load Stability regulation of the IC. Typical output voltage transient spike for a step change in the load Like any low-dropout regulator, the external current from 0mA to 50mA is tens of mV, PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 16 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator depending on the ESR of the output capacitor. Increasing the output capacitor's value and decreasing the ESR attenuates the overshoot. Layout Considerations To improve AC performance such as PSRR, response, it is , recommended that the PCB be designed with separate ground planes for VDD and VOUT, with each ground plane connected only at the GND pin of the device. Make VDD and GND lines sufficiently wide. If their impedance is high, noise pickup or unstable operation may result. Connect a capacitor C1 between VDD and GND pin, as close as possible to the pins. Set external components, especially the output capacitor C2, as close as possible to the IC, and make wiring as short as possible. Step-Down Converter output noise, and transient Input-Output (Dropout) Voltage A regulator's minimum input-output voltage differential (or dropout voltage) determines the lowest usable supply voltage. In battery-powered systems, this will determine the useful end-of-life battery voltage. Because the BL9110 uses a P-Channel MOSFET pass transistor, the dropout voltage is a function of drain-to-source on resistance [RDS(ON)] multiplied by the load current. BL9110 SOT89-5 PCB Layout for Reference Top Layer PPMIC BU BL9110 Rev 2.0 04/2016 Bottom Layer www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 17 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Package Description DFN-6 Step-Down Converter , Dimensions In Millimeters Symbol A A1 b c D D2 e Nd E E2 L h Min NOM Max 0.7 0.75 0.8 0.02 0.05 0.25 0.3 0.35 0.18 0.2 0.25 1.95 2 2.05 1 1.45 0.65BSC 1.30BSC 1.95 2 0.50 2.05 0.85 0.25 0.30 0.40 0.1 0.15 0.2 DFN-6 Surface Mount Package PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 18 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator SOT89-5 Step-Down Converter , Symbol A b b1 B C C1 D D1 e H Dimensions In Millimeters Dimensions In Inches Min Max 1.397 1.600 0.356 0.508 0.406 0.533 2.388 2.591 3.937 4.242 0.787 1.194 4.394 4.597 1.397 1.702 1.500 TYP. Min Max 0.055 0.063 0.014 0.020 0.016 0.021 0.094 0.102 0.155 0.167 0.031 0.047 0.173 0.181 0.055 0.067 0.060 TYP. 0.356 0.014 0.432 0.017 SOT89-5 Surface Mount Package PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 19 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator SOT-223-3 Package SOT-223 Package specification： Devices per reel 2500 Unit mm Step-Down Converter MIN A A1 A2 A3 b b1 b2 b3 c c1 D D1 E E1 e e1 L L1 L2 θ θ 1 PPMIC BU BL9110 Rev 2.0 04/2016 NOM 1.50 0.02 1.45 0.80 0.67 0.66 2.96 2.95 0.30 0.29 6.35 6.30 6.80 3.40 , 1.65 0.06 1.60 0.90 0.71 3.00 0.30 6.50 7.00 3.50 2.30BSC 4.60BSC 0.80 1.00 1.20 1.75REF 0.25BSC 0° 8° 10° 12° 14° www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved MAX . 1.80 0.10 1.75 1.00 0.80 0.75 3.09 3.05 0.35 0.31 7.05 6.70 7.20 3.60 20 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Taping dimension： Step-Down Converter , Taping reel dimension： PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 21 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator SOT-223-5 Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 22 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Package TO252-3 TO-252-3 Devices per reel 2500 Step-Down Converter , Taping dimension： PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 23 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Step-Down Converter , TO-252-5 PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 24 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Step-Down Converter , Symbol A1 A2 A3 b b1 c c1 D D1 E1 e L L1 L2 Θ Dimensions In Millimeters MIN 0.05 2.1 0.5 0.46 0.45 0.49 0.48 6.3 5.30 1.40 3.0 NOM 0.15 2.3 0.6 MAX 0.25 2.5 0.7 0.6 0.5 0.55 0.5 6.5 5.30 REF 5.50 1.27BSC 1.50 3.1 1.40BSC 0 0.56 0.52 6.7 5.70 1.60 3.2 8° TO-263-3 PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 25 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 26 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 27 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator TO-220-3 Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 28 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator SOT-89-3 Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 29 BL9110 1A Low Dropout, Low Quiescent Current High PSRR CMOS Linear Regulator TO92-3 Step-Down Converter , PPMIC BU BL9110 Rev 2.0 04/2016 www.belling.com.cn Belling Proprietary Information. Unauthorized Photocopy and Duplication Prohibited © 2011 Belling All Rights Reserved 30