Surface Mount JPS-2-900+ JPS-2-900 Power Splitter/Combiner 2 Way-0° 50Ω 400 to 900 MHz Maximum Ratings Operating Temperature Features -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) Internal Dissipation 1W max. 0.125W max. Permanent damage may occur if any of these limits are exceeded. SUM PORT 1 PORT 1 3 PORT 2 4 6 NOT USED 2,5 Outline Drawing Electrical Specifications FREQ. RANGE (MHz) ISOLATION (dB) H .047 1.19 J .065 1.65 K .065 1.65 L .300 7.62 E .225 5.72 F .055 1.40 AMPLITUDE UNBALANCE (dB) Max. Max. 3.0 0.4 Typ. Min Typ. Max. 24 18 0.5 1.2 Typical Performance Data Outline Dimensions ( inch mm ) D .100 2.54 PHASE UNBALANCE (Degrees) fL-fU Suggested Layout, Tolerance to be within ±.002 C --- INSERTION LOSS (dB) ABOVE 3.0 dB 400-900 Frequency (MHz) B .310 7.87 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications • cellular • UHF receivers/transmitters PCB Land Pattern A .280 7.11 CASE STYLE: BH292 Applications Pin Connections GROUND • low insertion loss, 0.5 dB typ. • excellent isolation, 24 dB typ. • excellent VSWR, 1.22:1 typ. • low amplitude unbalance 0.1 dB typ. • J-leads for excellent solderability and strain relief G .100 2.54 Total Loss (dB) 1 Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR 1 VSWR 2 S-1 S-2 400.00 412.50 437.50 462.50 512.50 3.56 3.58 3.50 3.47 3.53 3.57 3.59 3.52 3.46 3.52 0.01 0.01 0.01 0.01 0.01 26.26 26.26 26.14 25.96 25.82 0.74 0.69 0.66 0.69 0.77 1.28 1.28 1.28 1.27 1.27 1.28 1.28 1.27 1.26 1.25 1.30 1.30 1.29 1.28 1.27 550.00 587.50 625.00 662.50 700.00 3.53 3.53 3.53 3.59 3.59 3.50 3.48 3.48 3.52 3.51 0.03 0.05 0.05 0.07 0.09 25.67 25.50 25.44 25.41 25.39 0.79 0.84 0.88 1.00 0.97 1.27 1.26 1.25 1.25 1.24 1.24 1.23 1.22 1.22 1.21 1.26 1.25 1.25 1.24 1.23 737.50 775.00 812.50 862.50 900.00 3.56 3.59 3.69 3.66 3.66 3.47 3.49 3.55 3.50 3.48 0.09 0.10 0.13 0.16 0.18 25.43 25.53 25.81 26.05 26.24 1.04 1.05 1.02 1.00 1.11 1.23 1.21 1.20 1.18 1.17 1.20 1.20 1.19 1.18 1.18 1.22 1.21 1.20 1.19 1.19 1. Total Loss = Insertion Loss + 3dB splitter loss. wt grams 0.45 4.0 S-1(dB) 3.8 S-2(dB) 3.6 3.4 3.2 3.0 400 500 700 800 900 FREQUENCY (MHz) JPS-2-900 VSWR 1.5 1.4 600 #S-VSWR JPS-2-900 ISOLATION 40 ISOLATION (dB) TOTAL LOSS (dB) Demo Board MCL P/N: TB-48+ Suggested PCB Layout (PL-035) JPS-2-900 TOTAL LOSS #1-VSWR 35 30 25 20 400 500 600 700 800 900 FREQUENCY (MHz) electrical schematic #2-VSWR VSWR 1.3 1.2 1.1 1.0 400 500 600 700 800 900 FREQUENCY (MHz) Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits ® www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 [email protected] REV. D M151107 JPS-2-900 ED-4852/1 WZ/TD/CP/AM 150817 Page 1 of 1