Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance ensure worldwide acceptance. All units bear the CE Mark. The MAP55 utilizes a thermally efficient U-channel chassis design. Other mechanical design innovations include metric and SAE mounting inserts on each mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections or popular single row Molex connector mating. Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements. RoHS Compliant Wide Range Input for 110/220 VAC Applications Meets EN55022, Conducted Class B Limits Compact Footprint: 6.0 x 3.27 x 1.6 inch (152.4 x 83.1 x 40.6 mm) Greater than 225000 Hours MTBF Metric and SAE Mounting Inserts MAP55 Series 2 MODEL8 OUTPUT VOLTAGE ADJUSTMENT RANGE MAX OUTPUT CURRENT PEAK OUTPUT CURRENT1 LINE REGULATION LOAD REGULATION RIPPLE & NOISE2 INITIAL SETTING ACCURACY MAP40-1005G 5V 4.7V to 5.5V 8A 11A 0.2% ±1.5% 1% 5.0V to 5.2V MAP55-1012G6 12V/15V 11.4V to 15.75V 5.0/4.0A3 5.8/4.7A3 0.2% ±1% 1% 12.0V to 12.2V MAP55-1024G6 24V/28V 23.5V to 28.5V 2.5/2.2A3 2.9/2.5A3 0.2% 1% 1% 23.8V to 24.2V MODEL8 OUTPUT VOLTAGE ADJUSTMENT RANGE OUTPUT CURRENT PEAK OUTPUT CURRENT4 LINE REGULATION LOAD REGULATION RIPPLE & NOISE2 INITIAL SETTING ACCURACY MAP55-4000G7 MAP55-4001G7 MAP55-4002G7 MAP55-4003G7 MAP55-4004G7 +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +12V Fixed 3A 5A 0.2% 2% 1% 11.6V to 12.4V -5V Fixed 0.5A 1A5 0.5% 2% 1% -4.8V to -5.2V -12V Fixed 0.5A 1A5 0.5% 2% 1% -11.6V to -12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +24V Fixed 1.5A 2.5A 0.2% 2% 1% 23.0V to 24.9V -12V Fixed 0.5A 1A5 0.5% 2% 1% -11.6V to -12.4V +12V Fixed 0.5A 1A5 0.5% 2% 1% 11.6V to 12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +12V Fixed 3A 5A 0.2% 2% 1% 11.6V to 12.4V -12V Fixed 0.5A 1A5 0.5% 2% 1% -11.6V to -12.4V 5 +12V Fixed 0.5A 1A 0.5% 2% 1% 11.6V to 12.4V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +15V Fixed 2.5A 3.5A 0.2% 2% 1% 14.6V to 15.4V -5V Fixed 0.5A 1A5 0.5% 2% 1% -4.8V to -5.2V 5 -15V Fixed 0.5A 1A 0.5% 2% 1% -14.4V to -15.6V +5V 4.7V to 5.6V 6A 8A 0.2% 2% 1% 5.0V to 5.2V +24V Fixed 1.5A 2.5A 0.2% 2% 1% 23.0V to 24.9V -15V Fixed 0.5A 1A5 0.5% 2% 1% -14.5V to -15.5V +15V Fixed 0.5A 1A5 0.5% 2% 1% 14.5V to 15.5V 1 Peak load for 60 seconds or less are acceptable, 10% duty cycle, maximum. peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP55-1012 output currents are expressed as 12V/15V operation. MAP55-1024 output currents are expressed as 24V/28V operation. 4 Peak loads up to 65 watts for 60 seconds or less are acceptable, (10% duty cycle max.). Peak power must not exceed 65 watts. 5 Maximum load on V3 or V4 could be 1 amp continuous if output V4 or V3 is unloaded. 6 Maximum 60 W with 150LFM (Linear Feet per Minute) air cooling or maximum 50 W with convection cooling. 7 Maximum 55 W with 200LFM (Linear Feet per Minute) air cooling or maximum total output power 45 W at 40°C ambient operating temperature for models with no cover and 40 W for models with cover / convection cooling. 8 Non-G models use lead solder exemption. 2 Maximum [email protected] MAP55 Series PARAMETER 3 CONDITIONS / DESCRIPTION MIN NOM MAX UNITS 132 264 VAC 63 Input Voltage - AC Continuous input range 90 175 Input Frequency AC input 47 Brown Out Protection Lowest AC input voltage that regulation is maintained with full rated loads 90 VAC Hold-up Time Nominal AC Input Voltage (115VAC), full rated load 20 ms Input Current 90 VAC (55 W load) Input Protection Non-user serviceable internally located AC input line fuse. Inrush Surge Current Internally limited by thermistor, Vin = 264 VAC (one cycle), 25°C Operating Frequency Switching frequency of power supply (varies with load) PARAMETER CONDITIONS / DESCRIPTION MIN Full load @ 115 VAC. Varies with distribution of loads among outputs. MAP55-1012 MAP55-1024 MAP40-1005 and all multiple output models, main channel only 0.21 0.11 0.50 Efficiency Minimum Loads 1.6 22 NOM Hz ARMS 38 APK 180 kHz MAX UNITS 73% typical Amps Ripple and Noise Full load, 20 MHz bandwidth. Output Power Continuous output power, all multiple output models. Peak output power (60 s maximum, 10% duty cycle), all multiple output models. 55 65 Watts Overshoot / Undershoot Output voltage overshoot/undershoot at turn-on, V1, V2. 1 % Regulation Transient Response See Model Selection Chart Varies by output. Total regulation includes: line changes from 90132 VAC or 175-264 VAC, changes in load starting at 20% load and changing to 100% load. Recovery time, to within 1% of initial set point due to a 50-100% load change, 4% max. deviation. (Main output of multiple output units.) Turn-on Delay Time required for initial output voltage stabilization. Turn-on Rise Time Time required for output voltage to rise from 10% to 90%. (Nominal rise time for MAP55-1024 is 36 msec.) PARAMETER Overvoltage Protection Overload Protection CONDITIONS / DESCRIPTION See Model Selection Chart 1 μs 4 Sec 7 MIN MAP40-1005 MAP55-1012 MAP55-1024 Main output only of multiple output units. Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. 500 NOM 5.5 17.5 32.0 5.6 ms MAX UNITS 6.8 19.7 36.0 6.8 V Europe, Middle East +353 61 225 977 North America +1 408 785 5200 © 2016 Bel Power Solutions & Protection BCD.00564_AD Asia-Pacific +86 755 298 85888 MAP55 Series 4 PARAMETER Agency Approvals Dielectric Withstand Voltage Electromagnetic Interference, Conducted CONDITIONS / DESCRIPTION MIN Approved to the latest edition of the following standards; UL/CSA60950-1 2nd, IEC60950-1 2nd and EN60950-1 2nd. Input to Chassis Input to Output (tested by manufacturer only) FCC CFR title 47 Part 15 Sub-Part B - conducted & radiated. EN55022 / CISPR 22 conducted. EN55022 / CISPR 22 radiated. 2121 4242 B B A Insulation Resistance Input to output Leakage Current Per EN60950, 264 VAC PARAMETER CONDITIONS / DESCRIPTION Altitude Operating Temperature Operating Non-operating Derate linearly above 50°C by 2.5% per °C to a maximum temperature of 70°C (with 200LFM) NOM MAX VDC Class MΩ 7 MIN At 100% load: At 50% load: Storage Temperature UNITS NOM 500 μA MAX UNITS 0 0 10k 40k 50 70 -40 85 °C ±0.03 %/°C 95 %RH °C Temperature Coefficient 0°C to 70°C (after 15 minute warm-up) Relative Humidity Non-condensing Shock Operating, peak acceleration 20 G Vibration Random vibration, 10Hz to 2kHz, 3 axis 6 GRMS PARAMETER CONDITIONS / DESCRIPTION MAX UNITS Dimensions Weight Cover (Option) ±0.02 Feet 5 MIN NOM 152.4 x 83.1 x 40.6 6.00 x 3.27x 1.6 0.55 1.1 mm in kg lb 152.4 x 83.1 x 45.0 6.00 x 3.27 x 1.77 mm in Order the cover number 412-59584-G separately. For convection cooled applications, derate output power to 40 watts on multiple output units, 50 watts on MAP55-1012 and MAP55-1024 and 40 watts on MAP40-1005. Dimensions: CONNECTOR CONDITIONS / DESCRIPTION Input & Output Connectors 6-32 screw wire clamps on 0.312" (7.9 mm) centers 0.045" (1.1 mm) square pins on 0.156" (3.4 mm) centers Matting Connectors Molex Series 2139, 6442, or 41695 Chassis 0.090" (2.3 mm) aluminum alloy, with clear finish [email protected] MAP55 Series 5 Figure 1. Mechanical Drawing NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Europe, Middle East +353 61 225 977 North America +1 408 785 5200 © 2016 Bel Power Solutions & Protection BCD.00564_AD Asia-Pacific +86 755 298 85888